Removal of phenol by activated carbons prepared from palm oil mill effluent sludge

The study was attempted to produce activated carbons from palm oil mill effluent （POME） sludge. The adsorption capacity of the activated carbons produced was evaluated in aqueous solution of phenol. Two types of activation were followed, namely, thermal activation at 300, 500 and 800%, and physical activation at 150% （boiling treatment）. A control （raw POME sludge） was used to compare the adsorption capacity of the activated carbons produced. The results indicated that the activation temperature of 800℃ showed maximum absorption capacity by the activated carbon （POME 800） in aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon of POME 800. It was observed that the adsorption capacity was higher at lower values ofpH （2--3） and higher value of initial concentration of phenol （200--300 mg/L）, The equilibrium data were fitted by the Langmuir and Freundlich adsorption isotherms. The adsorption of phenol onto the activated carbon POME 800 was studied in terms of pseudo-first and second order kinetics to predict the rate constant and equilibrium capacity with the effect of initial phenol concentrations. The rate of adsorption was found to be better correlation for the pseudo-second order kinetics compared to the first order kinetics.     

Effects of Polluting Soil with Cassava Mill Effluent on the Bacteria and Fungi Populations of a Soil Cultivated with Maize

The study was carried out to investigate the effects of application of cassava mill effluent on bacteria and fungi types and population in a soil grown to maize (Zea Mays L.) Microbial populations were determined before pollution of soil with cassava mill effluent, six weeks after pollution with effluent and at the end of the experiment. Results obtained showed that bacteria and fungi populations increased with time as rates of pollution increased. It was also observed that some bacteria present in the soil at the beginning of the experiment and up to the sixth week after pollution with effluent became extinct at the end of the experiment.     

Dose and frequency dependent effects of olive mill wastewater treatment on the chemical and microbial properties of soil

Olive mill wastewater (OMW) is a problematic by-product of olive oil production. While its high organic load and polyphenol concentrations are associated with troublesome environmental effects, its rich mineral and organic matter contents represent valuable nutrients. This study aimed to investigate the valorization of this waste biomass as a potential soil conditioner and fertilizer in agriculture. OMW was assayed at three doses 50, 100, and 200 m³ ha⁻¹ year⁻¹) over three successive years in olive fields. The effects of the effluent on the physico-chemical and microbial properties of soil-layers were assessed. The findings revealed that the pH of the soil decreased but electrical conductivity and organic matter, total nitrogen, sodium, and potassium soil contents increased in proportion with OMW concentration and frequency of application. While no variations were observed in phosphorus content, slow increases were recorded in calcium and magnesium soil contents. Compared to their control soil counterparts, aerobic bacteria and fungi increased in proportion with OMW spreading rates. The models expressing the correlation between progress parameters and OMW doses were fitted into a second degree polynomial model. Principal component analysis showed a strong correlation between soil mineral elements and microorganisms. These parameters were not related to phosphorus and pH.     

Solid state fermentation of olive mill residues by wood- and dung-dwelling Agaricomycetes: Effects on peroxidase production,biomass development and phenol phytotoxicity

The in vivo conversion of dry olive mill residue (DOR) by wood- and dung-dwelling fungi − Auricularia auricula-judae, Bjerkandera adusta and Coprinellus radians − increases peroxidase secretion up to 3.2–3.5-fold (∼1.3, 3.5 and 7.0 U g⁻¹ DOR for dye-decolorizing peroxidase, manganese peroxidase and aromatic peroxygenases, respectively). The incubation of DOR with these fungi produced a sharp decrease in total phenolic content (100% within 4 wk), a reduction in phytotoxicity as well as a certain degree of plant growth caused by the stimulating effect of fungal-treated DOR. These findings correlate with a characteristic shift in the fragmentation pattern of water-soluble aromatics (detected at 280 nm) from low (0.2, 1.5 and 2.2 kDa, respectively) to high molecular mass (35 to >200 kDa), which demonstrates the presence of a polymerization process. Phenol-rich agricultural residues are a useful tool for enzyme expression and production studies of peroxidase-producing Agaricomycetes which could make DOR a valuable organic fertilizer.     

EOX concentrations in sediment in the part of the Bothnian Bay affected by effluents from the pulp and paper mills at Kemi, Northern Finland

The Bothnian Bay, which is the northernmost part of the Gulf of Bothnia in Northern Finland, is affected by effluents discharged from point sources such as the pulp and paper mills of Stora Enso Oyj Veitsiluoto Mill and Oy Metsä-Botnia Ab Kemi Mill at Kemi, and the Kemi municipal sewage plant, as well as the River Kemijoki. In this paper we discuss, how modernisation of the wastewater treatment plant at the mills, and process investments in the Best Available Techniques (BAT) for effluent treatment, have decreased the effluent discharges of biological oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), total nitrogen (TOT-N), total suspended solids (TSS) and adsorbable organically bound halogens (AOX) from the mills since 1988. One specific aim of the study was to determine the EOX (Extractable Organically Bound Halogens) concentrations in bottom sediment of the Bothnian Bay in order to assess whether the EOX concentrations reflect the reduction in discharges of chlorinated compounds. According to the monitoring program carried out every third year between 1997–2006, the decreasing trend in EOX concentrations in the top 2 cm of the bottom sediment reflect the decrease in organochlorine discharges (AOX) from the mills. In 1997 the EOX concentrations in bottom sediment varied between 3–70 μg of Cl g^?1 (dry weight), and in 2006 between 3.3–32 μg of Cl g^?1 (dry weight).     

Short-term impact of olive mill wastewater (OMWW) applications on the physico-chemical and microbiological soil properties of an olive grove in Argentina

The purpose of this work was to investigate the effects of spreading olive oil mill wastewater (OMWW) on soil biochemical parameters and olive production in an organically managed olive orchard. The experiment was carried out with three different doses of OMWW (80, 160 and 500 m³ ha^?1) and a control (untreated soil). Three samplings were done at 10, 30 and 90 days after the administration of the byproduct. OMWW application differentially modified the biochemical properties of the soil analyzed. Organic matter, organic carbon, total nitrogen and extractable phosphorus soil contents increased proportionally with each increasing dose. The values of these parameters decreased gradually with time. Total microbial activity was altered and the OMWW 500 m³ ha^?1 treatment proved to be the most active when compared with the other applied doses. OMWW agricultural application also modified the structure of soil microbial communities, particularly affecting Gram positive and negative bacteria, while fungal biomass did not show consistent changes. Although there was a salinity increase in the treated soil, especially at the highest dose, the productive parameters analyzed (fruit and oil tree^?1) were not affected. In light of the obtained results, we consider that low dose of OMWW could be considered an alternative farming practice for semiarid regions.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD_tot), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD_tot, SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD_tot removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

制浆厂污泥制备活性炭吸附剂

以制浆厂污泥为原料,采用ZnCl2法、H2SO4法和KOH法3种化学活化法制备活性炭吸附剂,并对产物吸附苯酚性能的影响因素进行比较分析.结果表明,采用ZnCl2法和H2SO4法制备的活性炭吸附剂的效果明显优于KOH法,ZnCl2法为最佳制备方法,在其最佳制备条件下(ZnCl2浓度3 mol/L,活化温度800℃,活化时间30 min,升温速率20℃/min)制得的活性炭比表面积可达到500.98 m2/g,得率为46.9％,对苯酚的去除率为70.4％.采用ZnCl2法和H2SO4法在最佳制备条件下可以制备孔径分布较宽,中孔结构发达的活性炭.     

Occurrence of boscalid and other selected fungicides in surface water and groundwater in three targeted use areas in the United States

Although the use of the insecticide γ-hexachlorocyclohexane (HCH) is now prohibited in many countries because of its hazardousness, stockpiles of γ-HCH still exist. In this study, we subjected γ-HCH to mechanochemical (MC) treatment with a planetary ball mill in the presence of CaO to investigate the feasibility of using this method for the treatment of γ-HCH stockpiles. We confirmed the degradation of γ-HCH and investigated the degradation mechanism. The major intermediates were identified to be 1,3,4,5,6-pentachlorocyclohexene (γ-PCCH) and chlorobenzenes (CBzs). Analysis of the steric structure of γ-HCH and identification of the degradation intermediates suggested that successive dehydrochlorination led to the formation of trichlorobenzenes. Products of further degradation (dichlorobenzenes, monochlorobenzene, and benzene) were also detected. Surprisingly, methane and ethane were also detected, which suggests cleavage of the C-C bonds of the cyclohexane ring and hydrogenation. All of the chlorine atoms in the γ-HCH could be transformed into inorganic chloride compounds by the MC treatment with CaO. Our results indicate that γ-HCH can be completely dechlorinated by MC treatment.     

Effect of stocking density and food quality on the growth and fecundity of an epigeic earthworm (<Emphasis Type="Italic">Eisenia fetida</Emphasis>) during vermicomposting

Physico-chemical characteristics of the feed and optimum worm density are important parameters for the efficient working of a vermicomposting system. Overcrowding of worms can affect the efficiency of a vermicomposting system even if all other parameters have been optimized. This article reports the effect of stocking density and feed quality on the growth and fecundity of Eisenia fetida under laboratory conditions. The feed mixtures contained cow dung and textile mill wastewater sludge in different ratios. Three feed mixtures and five stocking rates (1, 2, 4, 8, and 12) were tested for 12 weeks. The results showed that E. fetida growth rate was faster at higher stocking densities; however, biomass gain per worm was faster at lower stocking densities. Sexual maturity was attained earlier at higher stocking densities. Growth rate was highest in 100% cow dung at all the stocking densities when compared to textile mill wastewater sludge containing feed mixtures. A worm population of 27–53 worms per kg of feed was found to be the most favorable stocking density.