A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

Climate Change and Energy Technologies

The long time scale of the climate change problem and the inherent nature of the carbon cycle bring important implications for present technology development efforts. Even if major technology improvements are achieved for non-carbon-emitting technologies such as energy-intensity improvements, wind, solar, biomass, and nuclear over the course of the 21^st century, most examinations of potential future greenhouse emissions conclude that additional technology development will be required to stabilize greenhouse gas concentrations. The evelopment of an expanded suite of technologies including carbon capture and disposal, hydrogen systems and biotechnology hold the potential to dramatically reduce the cost of stabilizing greenhouse gas concentrations. This paper examines these technologies in the context of a global integrated assessment model of energy, agriculture, land-use, economics, and carbon cycle processes.     

Institutional and cost implications of multi-project baselines

Starting from a theoreticalnotion of capacity building this paperfocuses on the implications ofmulti-project baselines for costs andinstitutions. Availability of data and thelevel of data aggregation determine to alarge extent the cost of derivingmulti-project baselines. For localinstitutions this implies that theircapacity development needs are linked todecisions made on strictness of baselines.The initial higher costs of multi-projectcalculations in the development stage areeasily offset once more projects will usesuch a baseline. This paper argues theseinitial demands are not as high asexpected. Multi-project approaches willreduce transaction costs, especially forsmall-scale projects, will reducevalidation costs and likely reduce humanresource demands in other stages of theproject cycle.     

Rural landscape planning case study of Nanhua State Farm

１ＩｎｔｒｏｄｕｃｔｉｏｎＨｉｇｈｌｙｐｒｏｄｕｃｔｉｖｅｌａｎｄｕｓｅｒｅｓｕｌｔｓｉｎａｃｏｎｔｉｎｕｏｕｓｃｈａｎｇｅｏｆｌａｎｄｓｃａｐｅｓｉｎｒｕｒａｌａｒｅａｓ．Ｕｎｄｅｒｔｈｅｉｍｐａｃｔｏｆｃｒｏｐｐｒｏｄｕｃｔｍａｒｋｅｔｓ，ｌａｎ...     

山东省森林资源与木材供需平衡模型的建立与应用

本文在对山东省森林资源和木材供需平衡状况进行系统分析的基础上，利用系统动力学方法建立了山东省森林资源与木材供需平衡模型，通过对不同方案的政策仿真和结果分析，试图提出解决山东省木材供需矛盾的最佳途径，为制定林业发展政策提供依据。     

随机模拟在常州运河水质规划中的应用

以常州运河的水质规划为实例,讨论了确定性水质模型的随机模拟。讨论中引进了主观概率和客观概率的概念,用泰勒级数确定客观概率分布,用可能最大机率法估计主观概率分布,并给出了在实施不同规划方案时的水质概率曲线和水质达标的保证率。计算结果表明,使水质恶化的各种随机因素的作用不容忽视,各种水污染治理措施只能降低水质超标的风险水平。     

铜山口铜(钼)矿床成矿流体水-岩反应数值模拟

铜山口铜(钼)矿床位于湖北省大冶市境内,是一典型的矽卡岩-斑岩复合型矿床。通过对其流体包裹体的系统研究,确定了成矿阶段成矿流体的成分及温压条件,并结合矿床学研究,将成矿过程分解为两个平行的成矿阶段,即矽卡岩型矿化阶段和斑岩型矿化阶段。根据Johson和Reed等人建立的水 岩反应模型,对本矿床成矿流体与围岩反应并析出金属沉淀的过程进行了数值模拟计算,其结果与实际地质情况吻合较好。     

“城郊型农副业综合经营生态区”探讨

介绍了上海闽行区近年来大中型禽畜场污染治理的典型技术。根据该区的实践及其发展趋势来看,建立“城郊型农副业综合经营生态区“模式势在必行。文章还探讨了“城郊型农副业综合经营生态区”的特征、必要条件以及功能区划方案等。     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.     

BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.