高效液相色谱法测定稻米和稻田水土中多菌灵残留

采用高效液相色谱法测定稻米和稻田水土中的多菌灵残留,用稀盐酸溶液提取,经液液分配净化,外标法定量。多菌灵的峰面积与进样质量在0．15ng-220ng范围内呈线性相关,在稻田水、土壤和稻米中的最低检出质量比分别为0．01mg／kg、0．01mg／kg和0．02mg／kg。3个质量水平的加标回收试验结果表明,多菌灵在稻田水样中的平均回收率为87．1％～93．0％,RSD为3．3％～3．8％;在土壤中的平均回收率为84．8％-91．9％,RSD为1．4％～4．1％;在稻米中的平均回收率为83．9％～89．6％,RSD为1．8％-5．5％。     

不同类型压力对飞行员安全绩效的影响规律研究

为探究各类型压力对飞行员安全绩效的影响规律,为飞行员日常工作管理提供依据,选取某航空公司200名飞行员进行压力测试,并调取其近6 a的飞机品质(QAR)数据,通过相关性分析和线性回归分析将飞行员压力数据与其QAR数据进行对比分析,探究飞行员压力对飞行安全绩效的影响规律。研究结果表明:工作负荷压力、家庭压力、人际关系压力和组织管理压力会显著负向影响飞行员安全绩效;角色压力和专业发展压力会显著正向影响飞行员安全绩效。     

油漆挥发分爆炸特性及浓度检测装置设计研究

为了实现对喷涂车间内挥发分浓度的检测,进行20 L球形爆炸特性测试实验,分析了油漆挥发分主成分及爆炸特性,根据油漆挥发分受热易挥发遇冷易凝结的物理特性、采样器采样原理、滤膜增重法测量原理以及基于单机片C++软件程序编写的电路智能控制技术,设计1种喷涂车间挥发分浓度检测装置。研究结果表明:油漆挥发分主成分具有爆炸性,且随着油漆颗粒物浓度增大,爆炸压力也增加。设计的装置对挥发分的采集率都在90%以上,总采集率为93.1%~98.9%,装置能够较为准确地检测挥发分浓度。     

污水处理移动床生物膜反应器悬浮载体研究进展

介绍了移动床生物膜反应器(MBBR)中悬浮载体的种类和特性,讨论了对其性能的影响因素,总结了当前悬浮载体改性技术及性能评价的方法,并对后续研究提出了建议。     

聚氯化铝/聚丙烯酰胺复合絮凝剂处理染料废水的研究

研究了聚氯化铝-Fe_3O_4-聚丙烯酰胺复合絮凝剂对硫化黑染料废水的去除效果。研究结果表明,该复合絮凝剂对硫化黑染料废水具有较好的絮凝效果,在絮凝剂投加量为20 mg/L、废水pH值为8.0的条件下,该复合絮凝剂对硫化黑染料废水的浊度、色度、COD的去除率分别为95.59%,97.67%,85.55%。     

The effect of moisture content within multilayer protective clothing on protection from radiation and steam

The moisture from skin sweat and atmospheric water affects the thermal protective performance provided by multilayer protective clothing. Four levels of moisture content were selected to evaluate the impact of moisture on thermal protection under dry (thermal radiation) and wet (thermal radiation and low-pressure steam) heat exposure. Also, the role of moisture and its relationship with exposure time were analyzed based on skin heat flux and Henriques integral value. The addition of moisture to a fabric system was found to result in differences in second-degree and third-degree skin burn times. When moisture is added to a fabric system, it both acts as a thermal conductor to present a negative effect and provides a positive effect owing to thermal storage of water and evaporative heat loss. The positive or negative effects of moisture are mainly dependent on the thermal exposure time, the moisture content and the presence of hot steam.     

Structural equation model analysis for the evaluation of overall driving performance: A driving simulator study focusing on driver distraction

Objective: The present research relies on 2 main objectives. The first is to investigate whether latent model analysis through a structural equation model can be implemented on driving simulator data in order to define an unobserved driving performance variable. Subsequently, the second objective is to investigate and quantify the effect of several risk factors including distraction sources, driver characteristics, and road and traffic environment on the overall driving performance and not in independent driving performance measures.

Methods: For the scope of the present research, 95 participants from all age groups were asked to drive under different types of distraction (conversation with passenger, cell phone use) in urban and rural road environments with low and high traffic volume in a driving simulator experiment. Then, in the framework of the statistical analysis, a correlation table is presented investigating any of a broad class of statistical relationships between driving simulator measures and a structural equation model is developed in which overall driving performance is estimated as a latent variable based on several individual driving simulator measures.

Results: Results confirm the suitability of the structural equation model and indicate that the selection of the specific performance measures that define overall performance should be guided by a rule of representativeness between the selected variables. Moreover, results indicate that conversation with the passenger was not found to have a statistically significant effect, indicating that drivers do not change their performance while conversing with a passenger compared to undistracted driving. On the other hand, results support the hypothesis that cell phone use has a negative effect on driving performance. Furthermore, regarding driver characteristics, age, gender, and experience all have a significant effect on driving performance, indicating that driver-related characteristics play the most crucial role in overall driving performance.

Conclusions: The findings of this study allow a new approach to the investigation of driving behavior in driving simulator experiments and in general. By the successful implementation of the structural equation model, driving behavior can be assessed in terms of overall performance and not through individual performance measures, which allows an important scientific step forward from piecemeal analyses to a sound combined analysis of the interrelationship between several risk factors and overall driving performance.     

基于“压力-状态-响应”模型的江苏省环境绩效评估研究

环境绩效评估通过量化环境管理效果和分析环境管理中的不足,为改善环境管理水平提供依据。本研究依据压力-状态-响应(PSR)模型和主题框架法构建了包括环境效率、环境质量、环境治理3个二级指标和15个三级指标的市级环境绩效评估指标体系,并运用目标渐进法和均权法计算了江苏省13个地级2015年的环境绩效指数。结果显示,江苏省各地级市综合环境绩效指数分布在58.41(连云港市)~74.98(苏州市)之间,且与经济发展水平正相关。从空间分布来看,位于苏中地区的城市综合环境绩效多为良好,苏南和苏北各地之间的绩效差距较大;在二级指标中,苏南环境效率和环境治理绩效相对较好,苏中环境效率和环境质量绩效较好,苏北环境质量绩效较好。此外,本研究认为三级指标中的单位GDP用水量、空气质量达良好以上天数、工业用水重复利用率、一般工业固体废物利用率以及秸秆综合利用率等是主要的限制性指标。     

盐析分相微萃取—高效液相色谱法测定水中含氯除草剂

采用盐析分相微萃取—高效液相色谱法同时测定水中3种含氯除草剂,建立并优化了反相离子对液相色谱条件,考察了萃取剂种类、盐析剂的种类和加入量及试样pH对萃取效果的影响。对氯苯氧乙酸、2,4-二氯苯氧乙酸和2,4-滴丁酯的质量浓度在0.1~100.0mg/L内与色谱峰面积呈良好的线性关系,相关系数不低于0.9992。平均回收率分别为96.29%、79.16%和70.21%,相对标准偏差小于5.3%。该方法操作简便、绿色环保,适合于水中含氯除草剂的测定。     

基于数据包络分析的水污染物排放指标初始分配方法与案例研究

基于数据包络分析(DEA)的点源水污染物排放指标初始分配方法,是将基于DEA的线性规划评价方法进行改进,从而使其适用于评价企业的水环境绩效,并依此进行排污指标初始分配。将非期望产出作为投入指标处理,构造了5输入1输出的规模可变DEA模型,并以南京市280家企业的COD排放指标初始分配为例进行了分析。结果表明,方法的模拟分配结果在公平的基础上,反映了企业的环境效率,效率越高,可得到的COD排放指标也越高,这将对企业治污起到激励作用,分配方法具有一定的可操作性;对案例企业进行分组并实行组内参评,基本可以避免部分极值原始数据对评价结果的影响,得到的COD排放指标分配结果也更为合理。