Assessing microbial degradation of o-xylene at field-scale from the reduction in mass flow rate combined with compound-specific isotope analyses

In recent years, natural attenuation (NA) has evolved into a possible remediation alternative, especially in the case of BTEX spills. In order to be approved by the regulators, biodegradation needs to be demonstrated which requires efficient site investigation and monitoring tools. Three methods--the Integral Groundwater Investigation method, the compound-specific isotope analysis (CSIA) and a newly developed combination of both--were used in this work to quantify at field scale the biodegradation of o-xylene at a former gasworks site which is heavily contaminated with BTEX and PAHs. First, the Integral Groundwater Investigation method [Schwarz, R., Ptak, T., Holder, T., Teutsch, G., 1998. Groundwater risk assessment at contaminated sites: a new investigation approach. In: Herbert, M. and Kovar, K. (Editors), GQ'98 Groundwater Quality: Remediation and Protection. IAHS Publication 250, pp. 68-71; COH 4 (2000) 170] was applied, which allows the determination of mass flow rates of o-xylene by integral pumping tests. Concentration time series obtained during pumping at two wells were used to calculate inversely contaminant mass flow rates at the two control planes that are defined by the diameter of the maximum isochrone. A reactive transport model was used within a Monte Carlo approach to identify biodegradation as the dominant process for reduction in the contaminant mass flow rate between the two consecutive control planes. Secondly, compound-specific carbon isotope analyses of o-xylene were performed on the basis of point-scale samples from the same two wells. The Rayleigh equation was used to quantify the degree of biodegradation that occurred between the wells. Thirdly, a combination of the Integral Groundwater Investigation method and the compound-specific isotope analysis was developed and applied. It comprises isotope measurements during the integral pumping tests and the evaluation of delta13C time series by an inversion algorithm to obtain spatially integrated mean isotope values at the control planes. It was shown that the Rayleigh equation is applicable to spatially integrated mean isotope values in order to obtain the mean biodegradation between the consecutive control planes. All three approaches yielded consistently a 98-99% degradation of o-xylene.     

Anaerobic digestion of livestock and poultry manures spiked with tetracycline antibiotics

Abstract

We investigated the anaerobic degradation of tetracycline antibiotics (tetracycline [TC], oxytetracycline [OTC] and chlortetracycline [CTC]) in swine, cattle, and poultry manures. The manures were anaerobically digested inside polyvinyl chloride batch reactors for 64?days at room temperature. The degradation rate constants and half-lives of the parent tetracyclines were determined following first-order kinetics. For CTC the fastest degradation rate was observed in swine manure (k?=?0.016?±?0.001 d^?1; half-life = 42.8?days), while the slowest degradation rate was observed in poultry litter (k?=?0.0043?±?0.001 d^?1; half-life = 161?days). The half-lives of OTC ranged between 88.9 (cattle manure) and 99.0?days (poultry litter), while TC persisted the longest of the tetracycline antibiotics studied with half-lives ranging from 92.4?days (cattle manure) to 330?days (swine manure). In general, the tetracyclines were found to degrade faster in cattle manure, which had the lowest concentrations of organic matter and metals as compared to swine and poultry manures. Our results demonstrate that tetracycline antibiotics persist in the animal manure after anaerobic digestion, which can potentially lead to emergence and persistence of antibiotic resistant bacteria in the environment when anaerobic digestion byproducts are land applied for crop production.     

Quantifying the effects of fumarate on in situ reductive dechlorination rates

In situ methods are needed to evaluate the effectiveness of chemical amendments at enhancing reductive dechlorination rates in groundwater that is contaminated with the priority pollutant, trichloroethene (TCE). In this communication, a method that utilizes single-well, “push–pull” tests to quantify the effects of chemical amendments on in situ reductive dechlorination rates is presented and demonstrated. Five push–pull tests were conducted in each of five monitoring wells located in a TCE-contaminated aquifer at the site of a former chemical manufacturing facility. Rates for the reductive dechlorination of the fluorinated TCE-surrogate, trichlorofluoroethene (TCFE), were measured before (test 1) and after (test 5) three successive additions (tests 2–4) of fumarate. Fumarate was selected to stimulate the growth and activity of indigenous microorganisms with the metabolic capability to reduce TCFE and TCE. In three wells, first-order rate constants for the reductive dechlorination of TCFE increased by 8.2–92 times following fumarate additions. In two wells, reductive dechlorination of TCFE was observed after fumarate additions but not before. The transformation behavior of fumarate was also monitored following each fumarate addition. Correlations between the reductive dechlorination of TCFE and the reduction of fumarate to succinate were observed, indicating that these reactions were supported by similar biogeochemical conditions at this site.     

Hormetic effect of glyphosate on Urochloa decumbens plants

Abstract

Urochloa decumbens plants may be reached by herbicide drift from applications of glyphosate from neighboring areas or by variations during applications. Considering the different phenological stages and size of plants in these areas, the amount of active ingredient that reaches the plants probably varies. The objective of this study was to evaluate the effects of the application of different doses of glyphosate on U. decumbens plants. Two greenhouse experiments were conducted with two replications at different times. The first experiment evaluated the biological response of U. decumbens plants to glyphosate doses (0, 2.81, 5.63, 11.25, 22.5, 45, 90, 180, 360, 720, and 1,440?g a.e. ha^?1), with six replications. The second experiment evaluated the response of U. decumbens plants to the application of a selected low dose of 11.25?g a.e. ha^?1. Evaluations of injury were performed at 0, 7, 14, and 21?days after application, and dry weight of plants was determined for each evaluation period. U. decumbens plants increased in dry weight when using the glyphosate dose of 11.25?g a.e. ha^?1. However, plants had different responses to the application of this low dose. It can promote both stimulation and inhibition of plant growth.     

Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel

Emissions from fugitive dust due to erosion of “natural” wind-blown surfaces are an increasingly important part of PM₁₀ (particulate matter with sizes of 10 μm aerodynamic diameter) emission inventories. These inventories are particularly important to State Implementation Plans (SIP), the plan required for each state to file with the Federal government indicating how they will comply with the Federal Clean Air Act (FCAA). However, techniques for determining the fugitive dust contribution to over all PM₁₀ emissions are still in their developmental stages. In the past, the methods have included field monitoring stations, specialized field studies and field wind-tunnel studies. The measurements made in this paper allow for systematic determination of PM₁₀ emission rates through the use of an environmental boundary layer wind tunnel in the laboratory. Near surface steady-state concentration profiles and velocity profiles are obtained in order to use a control volume approach to estimate emission rates. This methodology is applied to soils retrieved from the nation's single largest PM₁₀ source, Owens (dry) Lake in California, to estimate emission rates during active storm periods. The estimated emission rates are comparable to those obtained from field studies and lend to the validity of this method for determining fugitive dust emission rates.     

Emissions of organophosphate and brominated flame retardants from selected consumer products and building materials

The emissions of selected flame retardants were measured in 1- and 0.02-m³ emission test chambers and 0.001-m³ emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SER_a) of TCPP varied between 20 ng m⁻² h⁻¹ and 140 μg m⁻² h⁻¹.The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SER_u) of organophosphates were determined to be 10–85 ng unit⁻¹ h⁻¹. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SER_a of between 0.2 and 6.6 ng m⁻² h⁻¹ and an SER_u of between 0.6 and 14.2 ng unit⁻¹ h⁻¹. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SER_a of between 0.1 and 29 ng m⁻² h⁻¹ and decabromodiphenylether was not detectable at all.     

Modelling the response of tree growth to temperature and CO2 elevation as related to the fertility and current temperature sum of a site

A methodology for simulating climate change impacts on tree growth was introduced into a statistical growth and yield model in relation to variations in site fertility and location implemented with current temperature sum. This was based on a procedure in which the relative enhancement in stem volume growth was calculated from short-term runs of a physiological simulation model for Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.) and silver birch (Betula pendula Roth.) stands. These simulations were made for a set of stands with species-specific variations in stand characteristics, location and fertility type first in current climatic conditions and then in different combinations of CO₂ and temperature elevations. Based on these simulations, the relative enhancement of volume growth induced by the climate change (relative scenario effect, RSEv) was calculated and modelled in relation to: (i) CO₂ and temperature elevation, stand density and the competition status of the tree in its stand, and (ii) variations in site fertility type and current temperature sum of a stand. Finally, these transfer functions for RSEv were applied to adapt the stem volume growth in the statistical growth and yield model to reflect the response to climate change.     

广东省稻田肥料施用现状及其合理性评估

分析了近十几年来广东省稻田肥料的施用量以及施肥对水稻产量、土壤有机质和养分的影响,并就肥料品种搭配、养分数量及配比、施肥时期、施肥方法、肥料利用率等方面对肥料施用的合理性进行了评估。通过与国内外有关资料的对比分析.结果表明,广东省稻田肥料施用仍有较大的潜力,有必要采取措施进一步发挥,以促进农作物优质高产。