基于BP神经网络优化制备Cu-Ce/TiO_2及其光催化活性研究

采用Cu和Ce对TiO2进行改性,基于正交实验设计和BP神经网络研究了Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数、Cu-Ce/TiO2中CuCe摩尔比及Cu-Ce/TiO2烧结温度对Cu-Ce/TiO2光催化降解甲醛溶液性能的影响.同时,对Cu-Ce/TiO2制备方案进行了优化,并运用X射线衍射仪、扫描电子显微镜和紫外-可见分光光度计对最佳条件下制备的Cu-Ce/TiO2进行表征.结果表明,优化的制备条件为Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数为2.88%,Cu-Ce/TiO2中Cu-Ce的摩尔比为1∶1,Cu-Ce/TiO2的烧结温度为570℃.共掺杂Cu离子和Ce离子能有效避免掺杂TiO2晶格内部表层和近表层产生较多的位错,从而抑制晶格畸变增大;诱导TiO2中锐钛矿型晶体向金红石型晶体转变的能力增强,有效抑制电子-空穴对的复合,产生介电局域效应.     

Application of an odd/even predominance of n-alkanes in oil–source rock correlation: taking the lower Paleozoic strata of the Tarim Basin as an example

The composition and distribution of n-alkanes carbon numbers reflect the source of kerogenic organic matter, sedimentary environment, and maturity of the rocks. The comparison results of the n-alkanes GC (gas chromatography) chromatograms in the Tazhong Low Uplift show that the n-alkanes of the source rocks in Upper Ordovician display an odd carbon number predominance. At the same time, Cambrian–Lower Ordovician exhibit an even carbon number predominance. The correlation between oil and source rock illustrates that crude oils in the fields of well TZ10-12 and well TZ24 stem from the Upper Ordovician source rocks. The origins of the crude oils in the fields of well TZ161-162 and well TZ45 are Cambrian–Lower Ordovician. The strata corresponding to the crude oils with odd/even carbon number predominance match the oil–source rock correlation. Thus, the characteristics of odd/even carbon number predominance in n-alkane compounds are effective for oil–source rock correlation in the Tazhong Low Uplift, Tarim Basin.     

三相生物流化床处理低C/N污水的亚硝化过程控制研究

将短程硝化与生物流化床相结合,采用低碳氮比的人工合成污水进行启动,考察进水COD、氨氮、DO、p H对硝化和亚硝化过程的影响。研究表明,较短的水力停留时间(HRT)和较少的接种污泥量有利于生物膜的生长,能够成功实现生物流化床的快速启动。高进水氨氮浓度有助于反应器实现亚硝酸盐的积累,但是这种积累并不稳定。当反应器中p H为7.5~8.1,ρ(DO)为1.5~2.5 mg/L时,最大亚硝化率达到75%左右,氨氮去除率达85%以上。出水NO-2-N和NO-3-N浓度随进水COD浓度的增加而减少;当进水COD浓度为50 mg/L时,出水硝酸盐浓度急剧减少,亚硝酸盐浓度有所降低,反应器发生同步硝化反硝化脱氮现象。     

Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.     

Enhanced CO2 adsorptive performance of PEI/SBA-15 adsorbent using phosphate ester based surfactants as additives

In this study,a series of polyetherimide/SBA-15: 2-D hexagonal P6 mm,Santa Barbara USA(PEI/SBA-15) adsorbents modified by phosphoric ester based surfactants(including tri(2-ethylhexyl)phosphate(TEP),bis(2-ethylhexyl) phosphate(BEP) and trimethyl phosphonoacetate(TMPA))were prepared for CO_2 adsorption.Experimental results indicated that the addition of TEP and BEP had positive effects on CO_2 adsorption capacity over PEI/SBA-15.In particular,the CO_2 adsorption amount could be improved by around 20% for 45PEI–5TEP/SBA-15 compared to the additive-free adsorbent.This could be attributed to the decrease of CO_2 diffusion resistance in the PEI bulk network due to the interactions between TEP and loaded PEI molecules,which was further confirmed by adsorption kinetics results.In addition,it was also found that the cyclic performance of the TEP-modified adsorbent was better than the surfactant-free one.This could be due to two main reasons,based on the results of in situ DRIFT and TG-DSC tests.First and more importantly,adsorbed CO_2 species could be desorbed more rapidly over TEP-modified adsorbent during the thermal desorption process.Furthermore,the enhanced thermal stability after TEP addition ensured lower degradation of amine groups during adsorption/desorption cycles.     

固相微萃取-气质联用法测定水中痕量土臭素和二甲基异崁醇

采用固相微萃-气相色谱/质谱法(SPME-GC/MS)对GSM和2-MIB进行富集检测。实验对萃取富集和仪器条件进行了优化,得出最佳实验条件：NaCl投加量30%,萃取温度65℃,萃取时间40 min,解吸3 min,不分流进样,SIM模式采集数据。实验还对萃取头的使用次数和维护进行了探讨。利用已经建立的SPME-GC/MS法对佛山市28家水厂的出厂水和原水、佛山典型景观千灯湖和亚艺公园湖水进行普查。该法具有操作简单快速、能实现自动化连续检测、准确、灵敏度高等特点,适用于饮用水中嗅味物质定性和定量。     

钛负载纳米Pd粒子电极的电化学催化性能研究

采用电化学沉积法将纳米钯粒子负载在钛板上,制备钛负载纳米钯粒子的NanoPd/Ti电极.利用循环伏安法和线性扫描伏安法对比研究NanoPd/Ti电极与Ti电极的电化学性能,以及分别对氯苯和硝基苯模拟废水电化学催化性能,表明NanoPd/Ti电极循环伏安过程出现新的氧化峰和还原峰,反应电位明显正移,反应过程峰电流也明显增大.通过降解实验,NanoPd/Ti电极可以在更低电压,更短时间内达到更好CODcr去除效果.     

多级A／O膜生物反应器污泥活性研究

采用一种新型的多级A／O膜生物反应器处理污水,对该工艺的污泥活性进行了研究。结果表明,VSS／SS在实验过程中呈较弱的下降趋势,多级A／O池曝气室污泥比硝化速率逐室下降,但各缺氧室污泥比反硝化速率基本一致;污泥释磷、聚磷过程在30 min和1 h内基本完成,反硝化聚磷试验表明污泥中存在DPB的富集,反硝化作用是反硝化细菌与DPB共同作用的结果。     

基于DMSP/OLS数据的江苏省城镇人口空间分异研究

人口空间分异研究是区域协调发展的基础,便捷准确地获取城镇人口全局和局域的空间信息,对于合理制定区域人口、经济和社会发展政策具有重要意义。在DMSP/OLS(夜间灯光)数据和人口数据之间的定量关联基础上,模拟出格网尺度上江苏省2012年人口密度,采用人口集中指数、空间变差函数识别人口分布的空间格局并探讨区别于行政单元尺度的人口格局形成机理。区域层面,江苏省人口空间分异呈现苏北地区"低密度点状"分布,苏南、苏中为"高密度面状"分布并存格局。城镇层面,江苏省人口空间分布结构具有4种类型,H-H型地区人口各向差异性最强,网格单元内随机变异最小;H-L型人口各向差异性最小,网格单元内随机变异较大;L-L型人口轴向均质化特征明显,网格单元随机变异较小;L-H型空间各向差异性较小,网格单元的随机变异最大。结果表明,基于DMSP/OLS夜间灯光数据反演而得到的人口格网模型具有巨大潜力,结合变差函数进行拟合分析可定量地刻画城镇内部人口分布的空间异质性特征。     

HF对Cu-SSZ-13/堇青石的原位合成及脱除NO_x的影响

以Cu-TEPA为模板剂原位水热合成一系列具有优良deNOx特性的Cu-SSZ-13/堇青石整体式催化剂.为进一步改善其氨的选择性催化还原氮氧化物的活性,在制备过程中添加HF对原位制备Cu-SSZ-13/堇青石整体式催化剂进行改性.利用XRD、SEM、XPS、BET、ICP-AES等对样品进行了表征.结果表明,当nHF/nAl在0.015—0.0375时,晶化72 h的Cu-SSZ-13/堇青石表现出了优异的脱硝性能和抗老化性能,其最大转化率为99.8%,NOx转化率保持在90%以上的最宽活性温度窗口为280—640℃,而无HF的新鲜样品的NOx转化率保持在90%以上的活性温度窗口为300—580℃;720℃老化50 h处理后,nHF/nAl=0.015—0.0375样品的NOx转化率保持在90%以上的最宽活性温度窗口为360—520℃,未添加HF的老化样品相应的活性温度窗口为400—500℃.无论新鲜还是老化,nHF/nAl=0.015—0.0375样品在低温段200—300℃和高温段500—700℃的NOx转化率基本都大于未添加HF的样品.结合表征结果,在催化剂原位水热合成过程中HF的加入既提高了样品的相对结晶度和负载量,又增大了样品的比表面积和比孔容,且提高了Cu-SSZ-13/堇青石骨架结构的稳定性,进而在一定程度上改善了Cu-SSZ-13/堇青石的高温脱硝活性和水热稳定性.