Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends

Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO₂ is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO₂ as a disinfecting agent, and the pathogen inactivation mechanism of CO₂ treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO₂ treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO₂ treatment. It will also be shown that the bacterial deaths under CO₂ treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment).     

植被混凝土在官地水电站的试验分析

本文主要对官地水电站高陡边坡植被混凝土前期绿化试验成果进行分析,以寻求在干湿季节明显、雨量集中、干旱季节漫长、温度高、蒸发量大等干热河谷气候特征条件下的最佳生境构筑方法,为官地水电站乃至雅砻江流域水电工程高陡边坡生态恢复提供技术依据。     

Optimization of the high-pressure, near-critical liquid-based microsortation of recyclable post-consumer plastics

High-pressure, near-critical liquids were used as float-sink separation media for the microsortation of polyolefin mixtures and PET/PVC mixtures. Near-critical carbon dioxide was used for the refinement of the polyolefins, and sulfur hexafluoride was used to separate post-consumer PVC from PET. Preliminary experiments indicated that there was no overlap in the density ranges of post-consumer HDPE, LDPE and PP containers. There was no overlap in the PET and PVC densities, with the exception of a single PVC packaging material with a density in the PET range. These initial results indicated that a float-sink separation was a viable means of microsortation. Separations of 91% LDPE (1/8′ beads)/9% PP (1/8′ chopped strands) resin mixtures and mixed post-consumer polyolefin flakes were then conducted in a laboratory-scale, 1-I batch apparatus. This apparatus not only permitted the observation of the separation, but also enabled the separated fractions to be removed from the high-pressure environment. The results indicated that LDPE purity of greater than 98.9% was obtained in 3 min or less if (a) the fluid density was 0.018 g/cm³ greater than the PP density and only 0.002 g/cm³ less than the LDPE density, thereby providing the greatest buoyancy force for the removal of the PP, (b) the fluid was recirculated upward through the bed of mixed plastics, facilitating the upward movement of the PP, and (c) the loading was kept at levels below 40% by volume. HDPE purity of 99% was also attained with clean, dry, post-consumer mixed plastic flakes. The loadings for these separations were very low, however, due to the difficulty in agitating the mixed bed of plastics using fluid recirculation. An economic analysis of these microsortation processes indicated that the value of the sorted plastics relative to the mixed feed must increase by approx. $0.08/lb for the CO₂-based separation and approx. $0.27/lb for the SF₆-based separation to justify the implementation of these high-pressure processes.     

循环热处理对高速钢超塑性的影响

此文研究了循环热处理工艺对W6Mo5Cr4V2钢超塑性的影响.结果表明:该钢在1040℃两次循环淬火是实现其超塑性的最佳热处理工艺;按此工艺进行预处理后,在810℃、初始应变速率为5.56×10~(-1)s~(-1)的条件下,该钢的超塑延伸率可达187%.     

Incidence rates and risk factors for injury events in high school students in Lijin County, China

PROBLEM: Most investigations of injuries among Chinese populations are focused on urban or better developed areas, fewer on rural or poor areas. METHODS: From September 21 to 27, 2002, an epidemiological investigation of eight kinds of injury-related events was carried out among 1,944 students in 39 classes randomly sampled from middle schools in Lijin County, a rural area. The eight kinds of events were: (a) traffic accidents, (b) poisoning, (c) fall, (d) burn or scald, (e) blunt or sharp tools contact, (f) electrical contact, (g) animal or insect bites, and (h) non-fatal drowning. RESULTS: The total incidence rate of eight kinds of injuries in the previous year was 21.1%. The incidence rate among boys was 24.2%, while that among girls was 17.4%, which was significant (chi-square=13.4, P<0.05). The incidence rate among junior high school students was 23.1%, while that among senior high school students was 15.5%, which was also significant (chi-square=13.2, P<0.05). A case-control study of 410 students with at least one of eight kinds of injury events indicated that students' gender and their mothers' health status were related to their injuries. CONCLUSION: The injury incidence rate in a rural area was less than other results in urban or developed areas. Students' gender and mothers' health status were important factors associated with the occurrence of injury. IMPACT ON INDUSTRY: In order to improve the surroundings of the growing population of adolescents, some preventive measures should be put forward, especially to the high-risk students of injury.     

Synthesis of Molecular Imprinting Polymers Separating Toluic Acid Isomers (II)

Polymers that can separate toluic acid isomers were synthesized by molecular imprinting technique. Molecular imprinting polymers (MIPs) for each isomer of toluic acids (TA) were synthesized using styrene and 4-vinylpyridine (4-Vpy). The adsorption characteristics of TA isomers, salicylic acid (SA), and benzoic acid (BA) on each MIP were investigated. The materials used for polymerization of TA isomers MIPs were adsorbed relatively well. This verifies that the MIPs which can adsorb template selectively were synthesized. In addition, the quantities of adsorbed TA isomers on the TA isomers MIPs and on the control polymer polymerized without template were compared and discussed. The variation of adsorption ability for MIPs with repeated use was investigated, showing excellent reproducibility.     

Temporal trends in agricultural water use and the relationships to hydroclimatic factors in the High Plains aquifer region

The High Plains aquifer (HPA) is the primary water source for agricultural irrigation in the US Great Plains. The water levels in many locations of the aquifer have declined steadily over the past several decades because the rate of water withdrawals exceeds recharge, which has been a serious concern to the water resources management in the region. We evaluated temporal trends and variations in agricultural water use and hydroclimatic variables including precipitation, air temperature, reference evapotranspiration, runoff, groundwater level, and terrestrial water storage across the HPA region for different periods from 1985 to 2020 at the grid, county, or region scale. The results showed that water withdrawals decreased from 21.3 km³/year in 1985 to 18.2 km³/year in 2015, while irrigated croplands increased from 71,928 km² in 1985 to 78,464 km² in 2015 in the entire HPA. The hydroclimatic time-series showed wetting trends in most of the northern HPA, but drying and warming trends in the southern region from 1985 to 2020. The groundwater level time-series indicated flat trends in the north, but significant declining in the central and southern HPA. Trends in irrigation water withdrawals and irrigation area across the HPA were controlled by the advancement of irrigation systems and technologies and the management of sustainable water use, but also were affected by dynamical changes in the hydroclimatic conditions.     

Dynamic pressure induced by a methane–air explosion in a coal mine

The hazardous effect of dynamic pressure and strong gas flows induced by a methane–air mixture explosion in underground coal mines is studied. The dynamic pressure effect of a methane–air explosion was analyzed by numerical simulation, in a duct and tunnel. Compared to the overpressure generated by an explosion that can act on a body, the dynamic pressure caused by the high-speed flow of the gaseous combustion products can cause serious damage as well. At the structural opening of a coal mine, the destruction caused by the dynamic pressure induced by a methane–air explosion is more serious than the overpressure. For a tube or tunnel partially filled by a methane–air mixture, the dynamic pressure is lower than the overpressure in the region occupied by the flammable mixture. Beyond the premixed region, the dynamic pressure is of the same order of magnitude as the overpressure.     

High-energy milling to decontaminate soils polluted by polychlorobiphenyls and atrazine

Mechanical energy has been used so far for running chemical reactions and for preparing new materials in absence of solvents. Very recently, the technology has been applied to solve environmental problems. In this paper, we describe the application of high-energy milling (HEM) for the remediation of soils contaminated by chlorinated organic compounds such as polychlorobiphenyls (PCBs) and agrochemicals like atrazine. NaBH₄ and LiAlH₄ have been successfully used for the total dehydrohalogenation of both classes of compounds, leaving a residue lower than 2 ppmw of the starting compound in the treated soil. LiAlH₄ was found to be more active than NaBH₄.     

Accounting for variation in prey selectivity by zooplankton

An ingestion-based prey selectivity function (IS) is described specifically to aid the simulation of zooplankton activity in circumstances in which selectivity varies, for example, as functions of prey palatability or abundance. In IS, the ultimate control of the rate of predation is not the external concentration of prey but the total rate of prey capture relative to predator demand. Further, “preference” is not an input (as it is for most prey selection functions) so that the selection or deselection of any or all prey can be freely altered. Hence, if required, all prey could be deselected, or the impact of inert materials or turbulence adversely affecting capture rates of any or all prey can be considered. Capture kinetics are not fixed at a common value for all items. In its basic form IS contains no more variables than other selectivity functions. The construction and use of switches to vary grazing in response to changes in abundance of alternative prey types or in prey nutritional (stoichiometric) quality is demonstrated. The advantages of using IS instead of the widely used ratio-based selectivity function is demonstrated with reference to model fits to experimental datasets for microzooplankton activity.