A review on application of flocculants in wastewater treatment

Flocculation is an essential phenomenon in industrial wastewater treatment. Inorganic coagulants (salts of multivalent metals) are being commonly used due to its low cost and ease of use. However, their application is constrained with low flocculating efficiency and the presence of residue metal concentration in the treated water. Organic polymeric flocculants are widely used nowadays due to its remarkable ability to flocculate efficiently with low dosage. However, its application is associated with lack of biodegradability and dispersion of monomers residue in water that may represent a health hazard. Therefore, biopolymers based flocculants have been attracting wide interest of researchers because they have the advantages of biodegradability and environmental friendly. But, natural flocculants are needed in large dosage due to its moderate flocculating efficiency and shorter shelf life. Thus, in order to combine the best properties of both, synthetic polymers are grafted onto the backbone of natural polymers to obtain tailor-made grafted flocculants. This paper gives an overview of the development of different types of flocculants that were being investigated for treatment of industrial wastewater. Furthermore, their flocculation performance will be reviewed and the flocculation mechanism will be discussed.     

Simulation-based fault propagation analysis—Application on hydrogen production plant

Recently production of hydrogen from water through the Cu–Cl thermochemical cycle is developed as a new technology. The main advantages of this technology over existing ones are higher efficiency, lower costs, lower environmental impact and reduced greenhouse gas emissions. Considering these advantages, the usage of this technology in new industries such as nuclear and oil is increasingly developed. Due to hazards involved in hydrogen production, design and implementation of hydrogen plants require provisions for safety, reliability and risk assessment. However, very little research is done from safety point of view. This paper introduces fault semantic network (FSN) as a novel method for fault diagnosis and fault propagation analysis by using evolutionary techniques like genetic programming (GP) and neural networks (NN), to uncover process variables’ interactions. The effectiveness, feasibility and robustness of the proposed method are demonstrated on simulated data obtained from the simulation of hydrogen production process in Aspen HYSYS^®. The proposed method has successfully achieved reasonable detection and prediction of non-linear interaction patterns among process variables.     

Interaction of alcohol and kola nut on brain sodium pump activity in Wistar rats

The effect of interaction of alcohol and kola nut on sodium pump activity was studied in Wistar rats. Thirty Wistar rats were divided into six groups of five rats per group. Control received a placebo (4 mL of distilled water). Groups 2–6 were treated for a period of 21 days with 10% (v/v) alcohol, 50 mg caffeine/kg, 50 mg kola nut/kg, or a combination of 10% (v/v) alcohol + 50 mg kola nut/kg, or 10% (v/v) alcohol + 50 mg caffeine/kg, respectively. One day after the final exposure, brains were harvested and several biochemical parameters examined including activities of total ATPase, ouabain-insensitive ATPase, ouabain sensitive ATPase (Na⁺–K⁺-ATPase) and levels of nonenzymatic breakdown of ATP and inorganic phosphate (P_i) released. Results showed that the essential enzyme of the brain responsible for neuronal function, Na⁺–K⁺-ATPase, was inhibited by alcohol–kola nut co-administration relative to control, resulting in a decreased ATP production, ion transport and action potential, leading to loss of neuronal activities.     

Assessment of potentially toxic elements in Swiss chard and sediments of Akaki River,Ethiopia

For the determination of 15 potentially toxic elements (V, Cr, Fe, Mn, Co, Ni, Cu, Zn, As, Se, Ag, Cd, Sn, Hg, and Pb) in plant and sediment samples of the Akaki River, Ethiopia, inductively coupled plasma–mass spectrometry, inductively coupled plasma–optical emission spectrometry, and a RA-915+ mercury analyzer were applied. Sediment and plant samples were mineralized using a closed-vessel microwave-assisted digestion system. The elemental concentrations varied considerably in plant and sediment samples. The minimum concentration was observed for known toxic elements (As, Hg, and Cd) while the highest concentration was observed for the elements of relatively low toxicity Zn, Mn, and Fe. The concentration of Cr, Fe, Pb, Zn, and As in Swiss chard surpassed the maximum permissible levels at specific sites. At some of the sites, the sediment quality guidelines are surpassed for Cu, Zn, and Pb.     

Biochemical and histological alterations induced by a formulation of dicofol in the embryonic liver of Gallus domesticus

In the present investigation, hepatotoxic effect of a commercially available insecticide formulation of dicofol (Colonel–S® 18.5% emulsified concentrate) was studied in the developing chick embryo. Fertilized eggs of Gallus domesticus were immersed in three different dose concentrations, i.e. 250, 500, and 1000 mg L^?1 of Colonel–S on “0” and fourth days of incubation for 60 min at 37 °C and incubated till embryonic day 16. Severe histopathological cellular lesions, such as extensive cell degeneration and necrosis with enlarged blood sinusoids, cytoplasmic vacuolization, and leucocyte infiltrations with congestion or dilation of central vein, appeared in dose-depended manner. Dicofol treatment also caused significant decrease in the levels of total protein, glycogen, and glutathione content and an increase in alkaline phosphatase activity of embryonic liver, whereas glutamic pyruvic transaminase activity showed mixed response.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Analyses of phenolic compounds occurring in olive oil mill wastewaters by GC–MS

Phenolic compounds in olive oil mill wastewaters were analysed by HRGC–MS after extracting the acidified solution with ethyl acetate and derivatization with N,O-bis(trimethylsilyl)trifluoroacetamide. Both simple and complex phenols were detected with the latter being the most abundant. 1,2-dihydroxybenzene (catechol), p-hydroxyphenyl ethanol (tyrosol), 3,4-dihydroxyphenyl ethanol (hydroxytyrosol) and 4-hydroxy-3-methoxyphenyl ethanol (homovanillyl alcohol) predominated among the simple phenols using a gas chromatograph coupled with a mass selective detector.     

Force-Velocity Characteristics of Individual Human Skeletal Muscles: TBCIat and TBCIong. Outline of the Method

The aim of the work is to outline a procedure of finding force-velocity (F–V) characteristics (F = f(V)) of individual skeletal muscles of the human locomotor system. The presentation is based on an example concerning extensors of the elbow joint: the lateral and long heads of triceps brachii (TBCIat and TBCIong). The experimental part of the procedure involves a natural movement of using the upper extremity to push an external object of variable, adjustable load, engaging both the elbow and shoulder joint.

Five men aged 23 took part in the experiment. Their task was to push the handle of a physical pendulum whose moment of inertia could be adjusted within the range of 58 kg m²-450 kg m², so as to give it maximum angular velocity. During each trial the movement of the trunk, of the upper extremity and of the pendulum was video recorded and the force applied with the hand to the handle of the pendulum was measured.

In order to find the F–V characteristics a simulation model SHOULDER was used, which is capable of solving the synergy problem for muscles of the arm and the shoulder girdle.

It was found that despite considerable dispersion of experimental points the respective regression lines revealed a clear tendency of decreasing muscle force for increased shortening velocity of the monoarticular head (TBCIat) and of increasing muscle force for increased lengthening velocity of the biarticular head (TBCIong) of the triceps brachii muscle.     

Lead astray: scale,environmental justice and the El Paso smelter

Residents in Paso del Norte (El Paso, Texas; Sunland Park, New Mexico; and Juárez, Mexico) have been concerned about heavy metal contamination in their communities since the 1970s, when high blood lead levels were found in children living in Smeltertown – a company town for the local metals smelter. After the smelter's closure in 1999, and throughout onsite and offsite cleanup efforts, residents have continued to express concerns about these contamination issues. Using a politics of scale framework and analysing ethnographic data and government, media and scientific documents, this paper identifies a set of major disjunctures between the scales of heavy metal contamination and the scales at which that contamination is regulated. These disjunctures exacerbate regional environmental injustice by complicating public participation, neglecting vulnerability and displacing hazards to new communities. Consequently, applying a politics of scale framework to this case study highlights regulatory and policy failures to address environmental justice.