A comparative investigation of NdSrCu_(1-x)Co_xO_(4-δ) and Sm_(1.8)Ce_(0.2)CU_(1-x)Co_xO_(4-δ) (x: 0-0.4) for NO decomposition

A series of single-phase T-structured NdSrCu_(1-x)Co_xO_(4-δ) with oxygen vacancies and T'-structured Sm_(1.8)Ce_(0.2)Cu_(1-x)Co_xO_(4-δ) (x:0-0.4) with oxygen excess were prepared using ultrasound-assisted citric acid complexing method, and characterized by means of techniques such as thermogravimetric analysis and NO temperature-progranuned desorption (NO-TPD). The catalytic activities of these materials were evaluated for the decomposition of NO. It was found that the NdSrCut_xCoxO4_b catalysts were of oxygen vacancies whereas the Sm_(1.8)Ce_(0.2)CU_(1-x)Co_xO_(4-δ) ones possessed excessive oxygen (i.e., over-stoichiometric oxygen); with a rise in Co doping level,the oxygen vacancy density of NdSrCu_(1-x)Co_xO_(4-δ) decreased while the over-stoichiometric oxygen amount of Sm_(1.8)Ce_(0.2)CU_(1-x)Co_xO_(4-δ)increased. The NO-TPD results revealed that NO could be activated much easier over the oxygen-deficient perovskite-like oxides than over the oxygen-excessive perovskite-like oxides, with the NdSrCuO_(3.702) catalyst showing the best efficiency in activating NO molecules. Under the conditions of 1.0% NO/helium, 2800 hr~(-1), and 600-900℃, the catalytic activity of NO decomposition followed the order of NdSrCuO_(3.702)> NdSrCu_(0.8)Co_(0.2)O_(3.736) > NdSrCu_(0.6)Co_(0.4)O_(3.789) > Sm_(1.8)Ce_(0.2)Cu_(0.6)Co_(0.4)O_(4.187)> Sm_(1.8)Ce_(0.2)Cu_(0.8)Co_(0.2)O_(4.104)> Sm_(1.8)Ce_(0.2)CuO_(4.045), in concord with the sequence of decreasing oxygen vacancy or oxygen excess density. Based on the results, we concluded that the higher oxygen vacancy density and the stronger Cu~(3+)/Cu~(2+) redox ability of NdSrCu_(1-x)Co_xO_(4-δ) account for the easier activation of NO and consequently improve the catalytic activity of NO decomposition over the catalysts.     

微生物固定化技术及其对土霉素生产废水处理的研究

本文提出活性炭核一海藻酸钙包埋微生物固定化技术，并将以假丝酵母为主的混合菌群固定化，然后分别在低氧与好氧状态对土霉素生产废水的处理进行了试验研究。结果表明，经固定的微生物，其使用温度、pH值适应范围扩大，对有机物的降解能力亦优于未固定微生物。室温下，当进水CODcr(化学需氧量)为2400～5500mg／1时，在低氧与好氧状态停留24h，其去除率分别达88．2％和97．3％。     

钒和钨负载量对V2O5-WO3/TiO2表面形态及催化性能的影响

采用浸渍法制备了一系列不同钒和钨负载量的V₂O₅-WO₃/TiO₂催化剂样品,对样品NH₃选择性催化还原NO性能进行了评价,并用BET、XRD、XPS等手段对催化剂样品的表面形态进行了表征.研究发现,钒的负载量对催化剂的比表面积和催化活性有显著影响,当钒负载量从1％升高到8％时,催化剂比表面积下降了16 m²/g,最高活性温度降低了约100℃.钨起到稳定剂和助剂的双重作用,当钒负载量为1％时,钨负载量从0升高到6％,催化剂比表面积仅下降了3 m²/g,而活性温度窗口向高温和低温各拓宽了约50℃.研究表明钒和钨负载量都能影响催化剂表面的VO_x物种,但对催化剂的表面晶型没有明显影响.     

新型反应器式BOD快速测定仪的性能研究

BOD是反映水体有机污染的主要参数,广泛应用于水体监测、污水处理厂的运行以及水与废水处理的教学与研究工作。传统的BOD测量需要5天,耗时费力。因此,开发BOD快速测量方法及仪器十分重要。文章针对一种新型反应器式BOD快速测定仪在仪器化过程中需要解决的一些问题进行了探讨。包括固定化微生物颗粒制备、反应温度的优化、有无搅拌条件、仪器性能等。实验结果表明,最适宜的测量温度为30℃,可以利用微量曝气代替磁力搅拌,以方便仪器的制作。在对150mg/L的GGA标准液进行的5次测定实验中,测量结果的最大偏差≤10%,精密度为4.6%。该仪器的灵敏度与准确性均能满足BOD快速测量要求。     

海藻酸钠包埋活性炭与活性污泥的固定化技术

以海藻酸钠为包埋剂，以粉末活性炭和硅藻土分别为吸附剂，探索了用蠕动泵滴动法制备固定化活性污泥球形颗粒的工艺过程，并对所制备的固定化活性污泥球形颗粒，进行了餐厅废水的处理静态实验，从中检验了固定化颗粒的性能。实验结果表明，以活性炭为吸附剂添加制得的固定化活性污泥球形颗粒，具有较好的处理能力，是一种合适的材料，而以硅藻作为吸附剂添加时则效果较差。     

不同空速下Pd/CeZrO_4/γ-Al_2O_3的起燃特性

以渍法制备了Pd/Ce0 ZrO4 /γ Al2 O3三效催化剂。在不同空速下 ,分别考察了空速对催化剂T30 % 、T50 % 、T90 % 的影响规律。详细分析了不同空速对催化剂起燃特性产生不同影响的原因所在。Pd/CeZrO4 /γ Al2 O3催化剂具有很好的起燃能力及空速特性。     

固定化微生物处理抗生素废水

研究PVA复合载体包埋固定化微生物颗粒处理抗生素废水的工艺条件，活性微生物为经抗生素废水以10％浓度增幅驯化75d后的活性污泥。结果表明：进水ρ（CODα）为2000mg/L、曝气为20h、温度在10-45℃、pH值7—10、固定化颗粒与废水比例1：4是固定化活性污泥处理抗生素废水的最佳工艺条件，CODCr去除率可迭80．57％。     

净化汽车尾气的三效催化剂

在我国，汽车尾气对大气的污染日趋严重，使用三效催化剂净化汽车尾气势在必行。介绍了几种主要的三效催化剂及其应用情况。     

固定化微生物脱氮

应用固定化微生物技术开展单级生物脱氮的研究。结果表明，固定化硝化与反硝化混合污泥可以实现单级生物脱氮，效果好于未固定化污泥，氨氧化速率和总无机氮的脱中分别提高到未固定化污泥的１．７倍和１３．４倍。结果还表明光硬化树脂也是一种较好的固定化介质。     

Progress on metal-support interactions in Pd-based catalysts for automobile emission control

The interactions between metals and oxide supports, so-called metal-support interactions (MSI), are of great importance in heterogeneous catalysis. Pd-based automotive exhaust control catalysts, especially Pd-based three-way catalysts (TWCs), have received considerable research attention owing to its prominent oxidation activity of HCs/CO, as well as excellent thermal stability. For Pd-based TWCs, the dispersion, chemical state and thermal stability of Pd species, which are crucial to the catalytic performance, are closely associated with interactions between metal nanoparticles and their supporting matrix. Progress on the research about MSI and utilization of MSI in advanced Pd-based three-way catalysts are reviewed here. Along with the development of advanced synthesis approaches and engine control technology, the study on MSI would play a notable role in further development of catalysts for automobile exhaust control.