开挖岩体边坡卸荷带宽度的计算方法

卸荷带的判别与计算,直接关系到岩体边坡的长期稳定性及致灾安全性.针对均质岩体边坡,采用弹性理论楔形体力学模型,提出了开挖岩体边坡力学模型,建立了开挖岩体边坡应力的计算方法;从开挖高度、开挖坡度、台阶宽度、岩体粘聚力、内摩擦角及岩体容重等方面,通过敏感性分析,探讨了开挖岩体边坡卸荷带宽度的变化规律,据此采用量纲分析法,建...     

Human impacts on methane emission from mangrove ecosystems in India

This study deals with the emission of methane in relation to changing environmental conditions and human impact, in three mangrove ecosystems of south India. Time-varying fluxes of methane adopting the close chamber technique were used to estimate CH₄ emission from an unpolluted site (Pichavaram mangroves) and two polluted sites viz. (1) Ennore Creek mangroves (affected by fertilizer effluents and crude oil discharges) and (2) Adyar estuary mangroves (affected by the discharges of organic and industrial wastes), covering monthly and seasonal variations. The results indicate annual average CH₄ emissions of 7.4, 5.02 and 15.4 mg m⁻² h⁻¹ from the sediment–water interface of the Pichavaram, Ennore Creek and Adyar estuary respectively. Emission characteristics obtained at Pichavaram mangroves represent a natural variability with changing physico-chemical factors, whereas the emission characteristics at Ennore Creek and Adyar estuary mangroves show anthropogenic influence. Several environmental factors such as oxygen availability, organic matter, soil physical and chemical properties, in addition to human-mediated interventions have been identified as influencing emission rates in the mangrove ecosystems. Preliminary CH₄ emission estimates for the mangrove ecosystems along the Indian sub- continent and the tropical and subtropical coastline of the world by linear extrapolation based on surface area range from 0.05 to 0.37 and 2.8 to 19.25 Tg CH₄ year⁻¹ respectively. Our results also highlight the impact of human activities on future emission of methane from the mangrove ecosystems. Received: 3 March 1999 / Accepted: 14 September 1999     

地表水环境遥感监测关键技术与系统

介绍了地表水环境遥感监测的关键技术与系统及其典型应用,其代表性机理模型和应用示范成果主要来自于中国科学院遥感与数字地球研究所的高光谱遥感团队在最近几年中取得的一些研究进展,主要包括建立了基于改进双峰法的水体分布自动化遥感提取方法,实现了简单、高效和高精度的水体提取;提出了大型湖泊长时序水量估算方法,并以青藏高原湖区为例,重建了典型湖泊面积、水位和水量序列;发展了基于“软分类”的典型内陆水体叶绿素a浓度反演方法,构建了基于生物光学模型的高度浑浊水体悬浮物浓度遥感反演半解析方法,提高了反演方法的区域和季节适用性;构建了基于水色指数的大范围湖库营养状态和透明度遥感监测方法,实现了全球大型湖库营养状态遥感监测,以及全国大型湖库透明度遥感监测;在此基础上,开发了地表水环境遥感监测系统,提高了水环境遥感监测效率,促进了卫星遥感在水环境监测中的高精度业务化应用。     

Towards a Paradigmatic Shift in Sustainability Studies: A Systematic Review of Peer Reviewed Literature and Future Agenda Setting to Consider Environmental (Un)sustainability of Digital Communication

The materiality of digital communication inflicts substantial environmental damage: the extraction of resources needed to produce digital devices; the toxicity of e-waste; and the rapidly increasing energy demands required to sustain data generated by digital communication. This damage, however, is paradoxically under-theorized in scholarship on environmental sustainability. Despite the existing critique of the “techno-fix” approach in sustainability studies, digitization – and digital communication in particular – continue to be celebrated as the tool for environmental sustainability; an approach we coin “digital solutionism.” The article presents the first systematic review of the literature to map the implicit assumptions about the relationships between digital communications and environmental sustainability, in order to examine how digital solutionism manifests, and why it persists. We propose a concept matrix that identifies the key blind spots with regards to environmental damages of the digital, and call for a paradigmatic shift in environmental sustainability studies. An agenda for future research is put forward that advocates for the following: (1) a systematic account of material damages of devices, platforms and data systems adopted into sustainability research and practice, resulting in changes in both research framing and methodological foundations; (2) a reconceptualization and denaturalization of the digital itself as a promising solution; (3) a theoretical dialogue between sustainability studies and environmental communication. (4) an expansion of environmental communication as a field, from focusing on the communication aspect of environmental change to include the environmental footprint of communication itself.     

微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收,但存在污染物去除种类有限及产能效率低的局限,近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状,对该技术现有的耦合形式进行分类,并对各种形式的耦合机理进行详细的阐释,最后对其未来的发展进行了展望。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

The synergistic effect of air mass on outdoor performance for different PV module in India

The effect of air mass (AM) on the performance of multi-crystalline silicon (m-Si), amorphous silicon (a-Si), and hetero-junction with intrinsic thin layer (HIT)-technology-based photovoltaic (PV) modules are evaluated for representative day of four seasons during the year 2011 for composite climate of India. To find the best performing PV module technology with respect to AM at the site, annual energy yields and performance ratio against different AM bands (AM 1–4.5) are plotted. It is found that HIT modules perform better than m-Si and a-Si at each AM band. Annual energy yields for all three technologies decrease with increasing order of AM bands. The performance ratio for HIT and m-SI modules initially increases and then decreases with increasing order of AM bands. However, for a-Si modules, the performance ratio decreases with increasing order of the AM bands.     

Photovoltaic-thermal (PV/t) panel to minimize electrical and air conditioning energy consumption of a typical office in Beirut

A combined photovoltaic–thermal (PV/t) panel is proposed to produce simultaneously electricity and heat from one integrated unit. The unit utilizes effectively the solar energy through achieving higher PV electrical efficiency and using the thermal energy for heating applications. To predict the performance of the PV/t at a given environmental conditions, a transient mathematical model was developed. The model was integrated in a heating application for a typical office space in the city of Beirut to provide the office needs for electricity, heating during winter season, and dehumidification and evaporative cooling during the summer season. To minimize the yearly office energy (electrical and heat) needs, the PV/t panel cooling air flow rate and the dehumidification regeneration temperature were determined for opimal unit operation. Thermal energy savings of up to 85% in winter and 71% in summer were achived compared to conventional systems at a payback period of 8 years for the panels.     

Governing sustainability: a dialogue between Local Agenda 21 and transition management

Since the 1990s, the local level of governance has become increasingly important in addressing the challenge of sustainable development. In this article, we compare two approaches that seek to address sustainability locally, namely Local Agenda 21 and transition management. Discussing both approaches along six dimensions (history, aim, kind of change, governance understanding, process methodologies, and actors), we formulate general insights into the governance of sustainability in cities, towns, and neighbourhoods. This dialogue illustrates two related modes of thinking about sustainability governance. We touch upon the importance of an integrated perspective on sustainability transitions through which sustainability is made meaningful locally in collaborative processes. We suggest that the explicit orientation towards radical change is a precondition for governing sustainability in a way that addresses the root causes of societal challenges. Governing sustainability should address the tensions between aiming for radical change and working with status quo-oriented actors and governing settings. We conclude that governing sustainability should be about finding creative ways for opening spaces for participation, change, and experimentation, that is, for creating alternative ideas, practices, and social relations. These spaces for innovation encourage a reflexive stance on ways of working and one's own roles and attitudes, thereby preparing a fertile terrain for actors to engage in change from different perspectives.     

Modeling urban solar energy with high spatiotemporal resolution: A case study in Toronto,Canada

This research presents a method to determine the maximum potential for the capturing of solar radiation on the rooftop of buildings in an urban environment. This involves the modeling of solar energy potential and comparison to historical building energy demand profiles through the use of 3-D solar simulation software tools and geographic information systems (GIS). The objective is to accurately identify the amount of surface area that is suitable for solar photovoltaic (PV) installations and to estimate the hourly PV electricity generation potential of existing building rooftops in an urban environment. This study demonstrates a viable approach for modeling urban solar energy and offers valuable information for electricity distributors, policy makers, and urban energy planners to facilitate the substantial design of a green built environment. The developed methodology is comprised of three main sections: (1) determination of suitable rooftop area, (2) determination of the amount of incident solar radiation available per rooftop, and (3) estimation of hourly solar PV electricity generation potential. A case study was performed using this method for Ryerson University, located in Toronto, Canada. It was found that solar PV could supply up to 19% of the study area’s electricity demands during peak consumption hours. The potential benefits of solar PV was also estimated based upon hourly greenhouse gas emission intensity factors as well as Time-of-Use (TOU) savings through the Ontario Feed-in-Tariff (FIT) program, which allows for better representation of the positive impacts of solar technologies.