Control of combustion-generated nitrogen oxides by selective non-catalytic reduction

Controlling nitrogen oxides (NO(x)) emissions is becoming a daunting technical challenge as increasingly strict emission limits are being imposed. The stringent regulations have prompted the innovation and characterization of NO(x) control technologies suitable for various applications. This paper presents a review on NO(x) removal techniques with particular reference to selective non-catalytic reduction (SNCR) technology. This includes initially how SNCR emerged as a technology along with a comparison with other relevant technologies. A review of various features related to selective non-catalytic gas phase injection of ammonia and ammonium salts (as reducing agent) is presented. The use of urea solution as a reducing agent and its performance in laboratory and pilot scale tests as well as large-scale applications is also discussed. Use of cyanuric acid as a potential reducing agent is also presented. The underlying reaction mechanisms have been reviewed for ammonia, urea and cyanuric acid for the explanation of various observations. Computational fluid dynamics (CFD) modeling as applied to SNCR is also presented. Subsequently the use of SNCR coupled with other in-combustion and post-combustion NO(x) control techniques is elaborated. Additionally, a two-stage NO(x) removal strategy to control un-reacted ammonia slip and to improve overall efficiency is discussed. At the end a summary is given which highlights various areas needing further research.     

Kinetic and equilibrium isotherm studies for the adsorptive removal of Brilliant Green dye from aqueous solution by rice husk ash

The present study deals with the adsorption of Brilliant Green (BG) on rice husk ash (RHA). RHA is a solid waste obtained from the particulate collection equipment attached to the flue gas lines of rice husk fired boilers. Batch studies were performed to evaluate the influences of various experimental parameters like initial pH (pH0), contact time, adsorbent dose and initial concentration (C0) on the removal of BG. Optimum conditions for BG removal were found to be pH0 approximately 3.0, adsorbent dose approximately 6 g L(-1) of solution and equilibrium time approximately 5 h for the C0 range of 50-300 mg L(-1). Adsorption of BG followed pseudo-second-order kinetics. Intra-particle diffusion does not seem to control the BG removal process. Equilibrium isotherms for the adsorption of BG on RHA were analyzed by Freundlich, Langmuir, Redlich-Peterson (R-P), Dubnin-Radushkevich (D-R), and Temkin isotherm models using a non-linear regression technique. Langmuir and R-P isotherms were found to best represent the data for BG adsorption onto RHA. Adsorption of BG on RHA is favourably influenced by an increase in the temperature of the operation. Values of the change in entropy (DeltaS0) and heat of adsorption (DeltaH0) for BG adsorption on RHA were positive. The high negative value of change in Gibbs free energy (DeltaG0) indicates the feasible and spontaneous adsorption of BG on RHA.     

不同磁黄铁矿自养反硝化脱氮除磷作用

氮磷排放标准日趋严格,开发高效廉价脱氮除磷材料已成为研究热点.采用黄铁矿与赤铁矿在管式炉中氮气气氛下600 ℃煅烧,得到硫化赤铁矿形成的磁黄铁矿、黄铁矿热分解形成的磁黄铁矿,构建磁黄铁矿-方解石体系处理含氮磷模拟废水,对比不同方式制备的磁黄铁矿、天然磁黄铁矿、黄铁矿、硫磺脱氮除磷性能,考察不同磁黄铁矿晶体结构和结晶度差异及其对脱氮除磷影响,探究不同体系中矿物结构和微生物群落变化.结果表明：黄铁矿热分解产物以六方磁黄铁矿为主;硫化赤铁矿产物以低结晶度的单斜磁黄铁矿为主,因而表现出优异的脱氮除磷活性,氮磷去除率分别为99.8%和96.8%.铁硫化物与微生物反应产物的XRD、SEM和FE-TEM分析结果表明,微生物能有效利用磁黄铁矿进行脱氮,磷酸盐主要以FePO₄形式被去除.群落分析结果表明铁硫化物脱氮除磷体系中的主要功能菌属为Thiobacillus和 Sulfurimonas,结晶度低的单斜磁黄铁矿更有利于Thiobacillus定向富集.     

Fe3O4活化过硫酸盐体系同步去除诺氟沙星和铅

采用Fe₃O₄活化过硫酸盐（PS）同步去除水中的NOR （诺氟沙星）和Pb （II）.探讨了Fe₃O₄投加量、PS浓度、初始pH值和Pb （II）浓度对NOR降解的影响.结果表明,NOR的降解符合伪一级反应动力学,在温度为30℃、NOR初始浓度为5.0mg/L、Pb （II）浓度为1.0mg/L、Fe₃O₄投加量为2.0g/L、PS浓度为1.5mmol/L、初始pH值为7.0的条件下,反应120min后,NOR降解率达90.2%,Pb （II）去除率为99.5%.自由基淬灭实验证实,硫酸根自由基（SO₄^-·）是NOR降解的主要自由基.通过LC-MS分析结果推测了NOR可能的降解路径和中间产物.Fe₃O₄活化PS高级氧化工艺可作为一种同步去除有机污染物和重金属的工艺.     

低温下废铁屑对厌氧氨氧化系统的影响

考察了在低温条件下(<20℃)废铁屑及其投加方式对厌氧氨氧化反应器脱氮性能和微生物群落的影响.结果表明,当废铁屑投加量为10g/L时,直接(R2)和间接(R3)投加方式均会对厌氧氨氧化反应造成短期抑制,总氮去除率分别降低4.7%和3.4%;30d连续运行后,2组反应器总氮去除率均提升至70%左右;反应器稳定运行阶段,R2的R_s(NO₂^--N与NH₄⁺-N去除量之比)和R_p(NO₃^--N生成量与NH₄⁺-N去除量之比)为1.57和0.22, R3的R_s和R_p为1.49和0.23,比R2更接近厌氧氨氧化反应理论值.废铁屑在水中发生腐蚀,降低DO并提高pH值,且R2,R3污泥中铁含量分别为对照组的1.64倍和1.93倍,废铁屑不仅改善了厌氧氨氧菌的生境,还满足了其对铁元素的需求.高通量测序结果显示,在20~50d的运行过程中, R1,R2,R3中优势厌氧氨氧化菌属Candidatus_Kuenenia的相对丰度分别增加-1.05%,0.14%和0.96%,废铁屑的投加促进了厌氧氨氧化菌在低温下的生长,且间接投加促进效果更为显著.     

纳米零价铁耦合黏土修复污染土壤的研究进展

黏土负载型nZVI具有低成本、易制备、环境相容性好、综合性能优越的特点.本文在归纳nZVI改性策略的基础上,比较了黏土种类对nZVI形貌和性能的影响,提出了理想黏土载体的优选顺序,分析了复合材料的铁含量、比表面积、nZVI尺寸等与去除性能之间的关系,对nZVI耦合黏土在修复土壤重金属、卤代有机物、硝酸盐、新型污染物等方面的研究进行了总结,并概述了nZVI技术在土壤修复中的负面效应,最后对nZVI耦合黏土修复污染土壤的未来方向进行了展望.     

A novel approach to estimate and control denitrification performance in activated sludge systems with respirogram technology

Respirogram technology has been widely applied for aerobic process, however, the response of respirogram to anoxic denitrification is still unclear. To reveal such response may help to design a new method for the evaluation of the performance of denitrification. The size distribution of flocs measured at different denitrification moments demonstrated a clear expansion of flocs triggered by denitrification, during which higher specific endogenous and quasi-endogenous respiration rates (SOUR_e and SOUR_q) were also observed. Furthermore, SOUR_q increases exponentially with the specific denitrification rate (SDNR), suggesting that there should be a maximum SDNR in conventional activated sludge systems. Based on these findings, an index R_q/t, defined as the ratio of quasi-endogenous (OUR_q) to maximum respiration rate (OUR_t), is proposed to estimate the denitrification capacity that higher R_q/t indicates higher denitrification potential, which can be readily obtained without complex measurement or analysis, and it offers a novel and promising respirogram-based approach for denitrification estimation and control by taking measures to extend anoxic time to maintain its value at a high level within a certain range.     

The role of doped-Mn on enhancing arsenic removal by MgAl-LDHs

To meet the challenges posed by global arsenic water contamination, the MgAlMn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the MgAlMn-LDHs and MgAl-LDHs were established and calculated by using density functional theory (DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the MgAl-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the -OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the MgAlMn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl⁻, making the ability to arsenate removal had been considerably elevated than the MgAl-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the MgAlMn-LDHs that with the doped-Mn.     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.     

高炉出铁场除尘方案研究

某钢铁企业高炉炼铁车间的出铁场在生产过程中产生大量高浓度的烟尘,对厂区的大气环境及周边的环境造成严重污染,同时直接危害了职工的身体健康。通过对整个出铁场除尘工艺系统及通风状况的分析及实际应用情况,总结出了适合该场合的系统除尘方案。