电凝聚-二级生化-吸附工艺处理CLT酸废水

采用电凝聚－二级生化－高效吸附工艺处理CLT酸废水,经过实验室静态小试和现场扩大试验,结果表明,预处理－电凝聚可以使废水中的BOD₅/COD 比值从 0.03提高到 0.1以上;在水解酸化－好氧 SBR二级生化可靠运行基础上,利用 DGB高效吸附作用,保证废水主要污染指标色度和COD都能达标,其去除率可分别达到96.1％和98.1％以上．     

Comparative Analysis of New Zealand and US Approaches for Agricultural Nonpoint Source Pollution Management

The role of the central government in New Zealand is generally limited to research and policy development, and regional councils are responsible for most monitoring and management of the problem. The role of the federal government in the United States includes research and monitoring, policy development, and regulation. States also have a significant management role. Both countries rely on voluntary approaches for NPS pollution management. Very few national water quality standards exist in New Zealand, whereas standards are widely used in the United States. Loading estimates and modeling are often used in the United States, but not in New Zealand. A wide range of best management practices (BMPs) are used in the United States, including buffer strips and constructed/engineered wetlands. Buffer strips and riparian management have been emphasized and used widely in New Zealand. Many approaches are common to both countries, but management of the problem has only been partly successful. The primary barriers are the inadequacy of the voluntary approach and the lack of scientific tools that are useful to decision-makers. More work needs to be performed on the evaluation of approaches developed in both countries that could be applied in the other countries. In addition, more cooperation and information/technology transfer between the two countries should be encouraged in the future.     

中国加入WTO对环保机械企业产生的影响

中国加入WTO将使国内环保企业竞争更为激烈 ,使国内环保机械企业生存变得更为艰难。同时 ,由于经验丰富的国外企业已将凭借实力占据国际市场 ,使得我国环保机械企业在国际市场竞争中处于不利地位。从另一方面讲 ,中国加入WTO可以促进我国政府采取有力措施 ,加强对环保市场的监管 ,克服无序竞争 ,为国内企业营造良好的竞争环境 ;加入WTO可以加快国内环保机械企业技术创新 ,开发具有国际水准的拳头产品 ,增强市场竞争力 ,同时 ,可以推动国内产业结构调整及资本运营 ,使环保机械企业快速发展壮大 ;另外 ,WTO的加入可以迫使国内环保机械企业学习国外先进经验 ,掌握全球经济知识 ,夯实参与国际市场竞争的基础。     

Urban Environmental Management in Botswana: Toward a Theoretical Explanation ofPublic Policy Failure

For the last three and half decades, Botswana has been widely acclaimed to be one of sub-Saharan Africa's longest and most stable liberal democracies, coupled with and sustained by a growing economy. One of the major contradictions, however, within this development scenario, has been the neglect of environmental problems in the country in general, and urban environmental issues in particular. Part of the problem fueling the misconception of environmental issues in Botswana is the state's domination of the country's environmental agenda. This is linked to the power disjunction in decision-making and policy processes between state and nonstate actors over the most appropriate course of action to tackle the problems. Without adopting appropriate analytical frameworks, it is possible that the problem of urban environmental mismanagement in Botswana will persist. This article examines some of the major urban environmental issues in Botswana from neighborhood, citywide, and urban–rural interface perspectives. Further, the elite theory of public policy is used to explain constraints on policy change in the urban environmental management arena in Botswana.     

A Conceptual Model for Describing Decision-Making Situations in Integrated Natural Resource Planning and Modeling Projects1

A conceptual model is developed herein for the purpose of stimulating discussions within groups planning and carrying out integrated natural resource projects. We first describe four basic components of integrated planning and modeling efforts: people, databases, technology, and organizational commitment. Second, we provide one view of the relationship between the size of the project's decision-making body and the timing of decisions during a project's life cycle. Finally, these two discussions are combined into a conceptual model describing the dynamic nature of decision-making within integrated projects. The abstractions and generalizations described here are not unique to private industry or governmental organizations and should provide the basis for a discussion of decision-making issues among interdisciplinary professionals embarking on large-scale or complex modeling efforts.     

Biologically active secondary metabolites in white clover (Trifolium repens L.) – a review focusing on contents in the plant, plant–pest interactions and transformation

Summary.  To exploit biologically active compounds from white clover (Trifolium repens L.) for suppressing weeds and soil-borne diseases, either as isolated products (biopesticides) or through cultivars with enhanced production of these compounds, the biologically active compounds must be identified, plant content measured, and their fate in soil known. The present review summarizes the published knowledge needed for such exploitation; providing essential information on structure and concentration of flavonols, flavones, condensed tannins, isoflavones, isoflavanones, pterocarpans, coumestans, cyanogenic glucosides, and saponins in healthy and stressed white clover plants. Various stresses and particular cultivars affect the concentrations of several of the compounds. Information on biological effects and the degradation/transformation of these compounds in plants or by microorganisms is available. There is no information on the degradation pathway in soil, the mechanisms of exudation and leaching of compounds from plants, and soil sorption properties of the compounds. The clover soil fatigue problem is increasing in grasslands and causes problems especially in organic farming. Research efforts focused on biological elements of clover soil fatigue have not explained it, and the influence of secondary metabolites has not been investigated. There are few investigations into the interaction between beneficial fungi/fungal-diseases and the occurrence of biologically active secondary metabolites in white clover plants. Such studies are critical to better understand beneficial fungi and pathogens.     

典型工业沿海区域的大气环境腐蚀性评价

目的 利用现役金属材料对工业沿海区域所处不同大气环境进行环境腐蚀性评价,并研究不同金属材料的腐蚀行为差异性,探讨工业沿海大气环境下金属材料的耐蚀性选择。方法 在不同大气环境下,选择现役金属材料Q235、16MnNi和L415开展1 a的户外曝晒试验,并利用质量损失分析、扫描电镜等手段,通过对金属基材进行腐蚀机理研究,评价大气环境的腐蚀性。结果 Q235、16MnNi和L415等3种钢在不同区域沿海工业大气环境下的腐蚀行为受大气腐蚀环境的影响较大,腐蚀产物中含有一定量的Cl和S。同种金属材料表面锈层的特殊结构,使得其基体与大气环境中的腐蚀因子相接触,引发了金属材料在不同大气腐蚀环境中不同腐蚀行为的差异性。结论 工业沿海区域的大气环境中,大气腐蚀性差异由酸循环腐蚀机制形成。3种钢材在腐蚀初期,由于锈层多孔隙结构和可溶性腐蚀产物形成,加重了腐蚀程度。黄岛区域、曹妃甸区域、岚山区域和湛江区域的大气腐蚀等级分别为C2、C3、C2、C3级。     

In vitro toxicity of particulate matter emissions from residential pellet combustion

Particulate matter emissions (PM₁₀) from the combustion, in a residential stove, of two commercial brands of certified (ENplus A1) pellets, a non-certified brand and laboratory made pellets of acacia were tested for their ability to induce ecotoxic, cytotoxic, and mutagenic responses in unicellular organisms and a human cell line. Ecotoxicity was evaluated through the Vibrio fischeri bioluminescence inhibition assay. Moreover, cytotoxicity was assessed at two time points (24- and 48-hr) through two complementary techniques in order to evaluate the cellular metabolic activity and membrane integrity of human lung epithelial cells A549. The Ames test using two Salmonella typhimurium strains (TA100 and TA98) was employed to assess the mutagenic potential of the polycyclic aromatic hydrocarbon fraction extracted from the PM₁₀ samples. Results obtained with the bioluminescent bacteria indicated that only particles from the combustion of acacia pellets were toxic. All samples induced impairment on the A549 cells metabolic activity, while no significant release of lactate dehydrogenase was recorded. PM₁₀ emissions from acacia pellets were the most cytotoxic, while samples from both certified pellets evoked significant cytotoxicity at lower doses. Cytotoxicity time-dependency was only observed for PM₁₀ from the combustion of acacia pellets and one of the brands of certified pellets. Mutagenic activity was not detected in both S. typhimurium strains. This study emphasises the role of the raw material for pellet manufacturing on the toxicological profile of PM emissions. Alternative raw materials should be deeply investigated before their use in pelletisation and combustion in residential appliances.     

厌氧发酵处理红霉素菌渣的效能及红霉素降解规律研究

红霉素菌渣是宝贵的资源,但却含有少量的红霉素残留,潜在引发环境细菌耐药的风险,被国家定义为危险废物。文章采用厌氧发酵技术处理红霉素菌渣,拟借助微生物作用降低抗生素残留并制取生物燃气,文中考察了红霉素残留随厌氧发酵过程的降解规律。研究发现:中温(35℃)发酵、接种比为0.4、含固率为8%时,单位池容产气率最高,红霉素菌渣的厌氧发酵处理是可行的。此外,在发酵的10 d后,红霉素降解率达到94%以上,日相对降解率与发酵液pH相关,pH越小降解速率越大,pH越接近中性,降解越缓慢。同时得到其降解过程与厌氧发酵产气量无明显相关性。该文为红霉素菌渣安全资源化提供了基础数据。     

IEC 60068-2-5中辐照度和温度的解读

为了更好解读IEC 60068-2-5:2010中的辐照度和温度设定,及如何执行该标准,结合标准中对辐照度和温度设定的要求,提供具体的解决方案。建议在执行标准时,应使用日光过滤片来过滤氙灯光源,实现该标准对光源的要求。同时建议使用340 nm点控制,辐照度设定为0.60 W/m2@340 nm。对于温度的设定,建议按照标准中图2的温度上升、下降与时间的关系,对其进行设定。另外,标准中程序A的循环接近最严酷的自然条件,而程序B和程序C的循环比程序A的严酷很多。因此,一般情况下推荐程序A,对于耐候性好的材料,需要加速测试的,推荐程序B。