Morphological and chemical characteristics of atmospheric particles in the Metropolitan Zone of Toluca Valley (Mexico)

Scanning electron microscopy with energy-dispersive spectroscopy has been used for both morphological and elemental chemistry analyses of atmospheric particles. This technique allows the in situ observation of individual aerosol particles in the sample chamber. Aerotransported particles were analysed from seven monitoring stations located in the Metropolitan Zone of Toluca Valley (MZTV). Several different morphologies were identified: aggregates, porous spheres, rough and smooth compact material. The elemental composition included C, Na, Mg, Al, Si, S, Cl, K, Mn, Ca, Ti, V, Cr, Fe, Ni, Cu, Zn and Ce. These are semiquantitative analyses considering the bulk sample or individual particles. It was possible to correlate or confirm some chemical associations such as C–S, Ca–S–O and Si–Al–O, probably due to the presence of compounds derived from incomplete combustion, building tailing materials and aluminosilicates of cortical origin. Bioaerosols such as pollen, spores, brochosomes and diatoms were identified in the zone; all these types of particles have a natural origin too. Several types of suspended particles were identified in the MZTV, they were from different sources (natural and anthropogenic) to which the population can be potentially exposed, and may cause harm in the short- and long-term, according to their chemical element composition and size.     

Social cost–benefit analysis of Karnataka Watershed Development (KAWAD) project,Karnataka, India

This paper presents results of a social cost–benefit analysis (CBA) of afforestation and soil moisture treatment of common lands under an integrated watershed development programme in Karnataka State, India. The aim of the study was to find out if soil moisture conservation and afforestation measures were justified in terms of economic efficiency. The assessment was undertaken by calculating the economic internal rate of return (EIRR) for five village common lands in two watersheds, Uparhalla and Chinnahagari, in central Karnataka. Focused group discussions were organised, using a semi-structured questionnaire and various stakeholders, including project implementing agencies, self help groups and other community-based organisations. The attractiveness of the programme in both watersheds for landless and land owners was high in three out of five sampled villages, with an EIRR ranging from 19% to 91%, while two villages in Chinnahagari watershed had extremely low EIRR, reflecting poor management of soil moisture and afforestation interventions and lack of institutional cohesion to sustain investments made to develop common lands. Therefore, the CBA conducted in the KAWAD project, except for two villages, shows that the investment made to develop common lands should yield substantial economic returns in the long term under a business as usual scenario.     

Successful intrauterine shunting of a sacrococcygeal teratoma (SCT) causing fetal bladder obstruction

We report a case of a sacrococcygeal teratoma (SCT) diagnosed at 22 weeks with a substantial intrapelvic cystic extension leading to bladder outlet obstruction and hydronephrosis at 27 weeks. Prenatal percutaneous shunting of the cystic teratoma was performed at 28 weeks to avoid prolonged fetal pelvic compression by the tumour that could have adverse effects by stretching the pelvic plexus and sacral nerves. Urinary dilatation resolved completely after shunting and a 3880 g baby girl was delivered at 39 weeks. The potential benefits of in utero shunting to avoid urological complications of SCTs with intrapelvic extension are discussed. Copyright © 2001 John Wiley & Sons, Ltd.     

Mesomelic campomelia,polydactyly and Dandy–Walker cyst in siblings

The present report describes two fetuses, one female and one male, with thus far undescribed skeletal malformations. The mother was a gravida 2, para 0. Both pregnancies were terminated in the second trimester because of multiple congenital anomalies diagnosed ultrasonographically resembling a short rib-polydactyly syndrome. Both fetuses were found to have postaxial hexadactyly of the hands and feet, marked bilateral campomelia of the forearm and shank bones, and a Dandy–Walker cyst. In addition, the fourth ventricle was dilated in the first sibling and the second sibling had an inverse intestinal malrotation. A literature search failed to reveal similar observations. Copyright © 2001 John Wiley & Sons, Ltd.     

Klippel–Trenaunay–Weber (KTW) syndrome: the use of in utero magnetic resonance imaging (MRI) in a prospective diagnosis

The diagnosis of the Klippel–Trenaunay–Weber (KTW) syndrome is rarely made antenatally. We report the use of both ultrasound and in utero magnetic resonance imaging (MRI) in the prenatal diagnosis of this syndrome. This is the first report of the use of prenatal MRI in the diagnosis of this condition. There was concordance in the findings of both modalities, with limb hypertrophy, and multiple haemangiomata – both subcutaneous and internally – demonstrated with ultrasound and MRI. The patient elected to terminate the pregnancy because of associated oligohydramnios and a small fetal chest noted at 20 weeks. The postmortem examination confirmed the antenatal diagnosis. Copyright © 2001 John Wiley & Sons, Ltd.     

Pregnancy after preimplantation genetic diagnosis for Sanjad–Sakati syndrome

Sanjad–Sakati syndrome (SSS) is an autosomal recessive disorder characterized by congenital hypoparathyroidism, growth and mental retardation. In Saudi Arabia, the disease is caused by a deletion of 12 bp (155-166nt) in the tubulin-specific chaperone E gene. In a family with two affected siblings with SSS, preimplantation genetic diagnosis (PGD) was performed. Fluorescent PCR (F-PCR) was utilized to check the heterozygosity and the homozygosity status of the parents and the affected children, respectively. F-PCR was then optimized for single-cell analysis by using peripheral blood lymphocytes. The patient underwent a cycle with intra-cytoplasmic sperm injection. A total of 11 embryos were obtained and biopsied. There were five heterozygous, three homozygous affected and three normal embryos. One heterozygous and one normal embryo were transferred because of their very good quality (morula). A singleton pregnancy was obtained, and amniosynthesis confirmed the presence of the heterozygous fetus. These results show for the first time, the feasibility of PGD for SSS. Copyright © 2004 John Wiley & Sons, Ltd.     

Hot extrusion process modeling using a coupled upper bound-finite element method

A thermo-mechanical model has been developed for modeling of hot extrusion processes. Accordingly, an admissible velocity field was first proposed by means of stream function method and then, extrusion pressure as well as temperature variations within the metal and the die were predicted employing a combined upper bound and Petrov–Galerkin finite element analysis. In order to evaluate the model predictions, hot extrusion of AA6061-10%SiC_p was considered under both isothermal and non-isothermal conditions and the predicted force–displacement diagrams under various extrusion conditions were compared with the experimental ones and reasonable consistency was found between the two sets of results.     

Problems and issues in laser beam welding of aluminum–lithium alloys

Aluminum–lithium (Al–Li) alloys are very attractive for potential aerospace applications due to their lower density, higher specific strength and rigidity, better corrosion and fatigue crack growth resistance properties, compared to conventional aluminum alloys. Laser beam welding (LBW), being an advanced joining method, has already been approved for applications involving aluminum alloys. However, there are still a number of problems and issues to be answered and solved in LBW of Al–Li alloys. In this review, the properties of Al–Li alloys and the characteristics of LBW are introduced, the formation and prevention of the main weld defects such as porosity and hot cracking are discussed, and then the weld microstructure and the joint mechanical properties are described in highlight. At the end, an outlook on future trends is presented.     

Rethinking the study of human–wildlife coexistence

Although coexistence with wildlife is a key goal of conservation, little is known about it or how to study it. By coexistence we mean a sustainable though dynamic state in which humans and wildlife coadapt to sharing landscapes, where human interactions with wildlife are effectively governed to ensure wildlife populations persist in socially legitimate ways that ensure tolerable risk levels. Problems that arise from current conflict-oriented framing of human–wildlife interactions include reinforcing a human–nature dichotomy as fundamentally oppositional, suggesting coexistence requires the absence of conflict, and skewing research and management toward direct negative impacts over indirect impacts and positive aspects of living with wildlife. Human behavior toward wildlife is framed as rational calculus of costs and benefits, sidelining emotional and cultural dimensions of these interactions. Coexistence is less studied due to unfamiliarity with relevant methodologies, including qualitative methods, self-reflexivity and ethical rigor, and constraints on funding and time. These challenges are illustrated with examples from fieldwork in India and Africa. We recommend a basic approach to case studies aimed at expanding the scope of inquiries into human–wildlife relations beyond studies of rational behavior and quantification of costs and benefits of wildlife to humans.