固相萃取- GC/MS法测定水中邻苯二甲酸酯类

采用固相萃取-GC／MS法测定水中6种邻苯二甲酸酯类有机污染物,比较了不同固相萃取柱对萃取效果的影响,优化了水样pH值、水样流量、穿透体积、洗脱溶剂、洗脱剂体积、洗脱流量等萃取条件。方法在0．050μg/L-800μg/L范围内线性良好,检出限为0．008μg/L～0．03μg／L,标准溶液测定的RSD≤10．5％,实际水样加标回收率为80．0％-100％。     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

广州天河区大气中二噁英年度监测及气固分配规律

对广州天河区大气中二噁英进行年度监测和气固分配模式的研究。结果表明,天河区大气中存在较高浓度的二噁英;低氯代二噁英对毒性当量贡献较大,其主要分布在气相,2,3,4,7,8-PeCDF对毒性当量贡献最大,其贡献超过35%;高氯代二噁英(主要是OCDF、OCDD、1,2,3,4,6,7,8-HpCDF和1,2,3,4,6,7,8-HpCDD)对浓度贡献较大,其主要分布在颗粒相。     

Principal component analysis for soil contamination with organochlorine compounds

In order to investigate the distribution pattern of individual organochlorine compounds in soil samples collected from the sites (Canary Island – Spain, China, Germany, India, Romania, Russia, Serbia, Swiss, UK) affected by industrial activities to the more remote areas, principal component analysis was performed on the data taken from literature. Loading plots pointed out the strong correlation among the variables. Score plots revealed similar PCB- and OCP-soil patterns for majority of the investigated sites. Nevertheless, the temporal differences of PCB-soil loads have been identified: the late 1990s and early 2000s concentrations are similar to those of the early 1940s, and they are below the levels existed in 1980. The most pronounced PCB concentrations characterized the soil from 1966. For OCPs the influence of sites location on the detected concentration has been revealed: China and India were characterized by comparably higher loads of DDX (DDT and its metabolites) and of HCH-isomers, respectively.     

Effects of sewage sludge blending on the coal combustion: a thermogravimetric assessment

Combustion of urban sewage sludge together with coal in existing infrastructures may be a sustainable management option energetically interesting for these materials, usually considered wastes. Thermogravimetric analysis was used to study the combustion of a semianthracite coal and the modifications undergone when adding a small percentage (2%, 5%, 10%) of sewage sludge. Both Differential Scanning Calorimetric analysis and Differential Thermogravimetry burning profiles showed differences between coal and sewage sludge combustion. However, the effects of adding a percentage of sewage sludge equal or smaller than 10% was hardly noticeable in terms of heat release and weight loss during the coal combustion. This was further proved by non-isothermal kinetic analysis, which was used to evaluate the Arrhenius activation energy corresponding to the co-combustion of the blends. This work shows that thermogravimetric analysis may be used as an easy rapid tool to asses the co-combustion of sewage sludge together with coal.     

Endpoint ‘floating leaves’ of <Emphasis Type="Italic">Potamogeton natans</Emphasis>: A new method to evaluate the development of macrophytes in pond mesocosms

Goal, Scope and Background One of the advantages of long-term mesocosm experiments as compared to short-term standard toxicity tests in the laboratory is the potential for detecting secondary effects due to the interaction of species and recovery with biomass of macrophytes being an important endpoint. However, generating biomass data by harvesting is often laborious, time-consuming, costly and restricted to the end of the experiment. Moreover, valuable information may get lost, in particular in single application studies, since maximal primary effects and secondary effects or recovery occur per se at different times. Potamogeton natans was used as an example in order to test whether number and area of floating leaves can be reliably measured and be used as intermediate and final endpoints in mesocosm effect studies. Methods Digital photos, which were taken of the water surface in the course of an indoor pond mesocosm study on herbicide effects, were subjected to image analysis. The results were compared to wet weight and ash-free dry weight of Potamogeton at the end of the herbicide study. Results and Discussion Both number and area of floating leaves indicated the same herbicide effects as wet weight and ash-free dry weight of Potamogeton. Error introduced by the different work steps is small and can be further minimised by a number of method improvements. Recommendations and Perspectives In indoor mesocosm studies, errors due to the perspective adjustment may be circumvented by taking the photos perpendicular to the water surface. Correction for lens aberration, identical light conditions and the use of fluorescence images are considered promising. Field applications are proposed.     

基于集对分析的尾矿库安全评价研究

为更好地对尾矿库的安全状况进行综合评价,针对尾矿库的特点建立了指标体系,并采用层次分析法确定各指标权重.将集对分析理论用于尾矿库的安全评价,并通过实例证明该理论适合于尾矿库的安全评价.集对分析中差异度I取1和-1.研究表明,当I=1时,指标体系中所有处于"一般安全"状态的指标项经过整改后能处于"安全"状态,此时联系度μ=0.736,尾矿库处于"安全"状态; 当I=-1时,指标体系中所有处于"一般安全"状态的指标项,在安全管理水平下降的情况下全部转为"不安全"状态,此时μ=0.114,尾矿库处于"不安全"状态.I的不同取值可反映尾矿库的具体安全状态,同时也反映尾矿库的安全管理水平,并充分体现了安全管理的重要性.研究为尾矿库的安全评价提供了一条新途径.     

新疆矿区煤矿瓦斯排放现状与趋势分析

为获得新疆矿区当前生产规模对应的瓦斯排放基量,调查了研究矿区生产矿井的瓦斯排放现状.根据各矿区2004-2006年生产矿井的开采煤层、生产水平、生产规模和瓦斯排放等参数,对不同矿区和煤田进行了统计分析,计算了新疆矿区当前生产规模对应的瓦斯排放总量,同时对重点瓦斯防治矿区和一般瓦斯防治矿区进行了分类.调查结果表明,新疆矿区煤矿平均吨煤相对瓦斯涌出量由2004年的2.82m3/t增加到2006年的3.09 m3/t,呈逐年递增趋势; 新疆矿区2004-2006年的年平均瓦斯(CH4)排放量为1.05×108 m3/a;准南煤田(I)和塔北煤田(VI)的平均绝对瓦斯涌出量分别占全疆绝对瓦斯涌出总量的64.82%和15.19%,为相对瓦斯富集区,也是当前瓦斯防治的重点区域.按照矿区3年平均绝对瓦斯涌出量(大于1.00m3/min)或平均相对瓦斯涌出量(大于5m3/t)将新疆矿区分为重点瓦斯防治矿区和一般瓦斯防治矿区,并提出了瓦斯分类治理的具体建议.应用灰色系统理论,结合调查数据分别求解了新疆矿区原煤产量与绝对瓦斯涌出量的GM[1,1]预测模型.本研究为新疆煤炭资源后续规模开发过程中的相关环境决策和节能减排政策的实施提供了依据.     

重型自卸汽车车架横梁异常断裂原因分析

针对无副车架的重型自卸汽车在使用过程中出现的车架横梁异常断裂问题,建立了以板壳单元为基本单元的自卸汽车车架有限元分析模型,采用NASTRAN有限元分析软件对车架强度进行分析.有限元分析结果表明,车架横梁异常断裂现象是横梁连接部位应力值大于材料的屈服强度引起的,这与实车车架断裂结果吻合.根据实际工艺要求,改造车架结构,将连接第2根横梁和纵梁的L板厚度变大,并将平衡悬架推力杆支座由整体式支撑改为分体式支撑,从而使两处的最大应力值分别比原结构下降20.4%和51.7%.改进后车架断裂区的强度明显提高,这表明改造方法有效.     

Individual risk analysis of high-pressure natural gas pipelines

Transmission pipelines carrying natural gas are not typically within secure industrial sites, but are routed across land out of the ownership of the pipeline company. If the natural gas is accidentally released and ignited, the hazard distance associated with these pipelines to people and property is known to range from under 20 m for a smaller pipeline at lower pressure to up to over 300 m for a larger pipeline at higher pressure. Therefore, pipeline operators and regulators must address the associated public safety issues.This paper focuses on a method to explicitly calculate the individual risk of a transmission pipeline carrying natural gas. The method is based on reasonable accident scenarios for route planning related to the pipeline's proximity to the surrounding buildings. The minimum proximity distances between the pipeline and buildings are based on the rupture of the pipeline, with the distances chosen to correspond to a radiation level of approximately 32 kW/m². In the design criteria for steel pipelines for high-pressure gas transmission (IGE/TD/1), the minimum building proximity distances for rural areas are located between individual risk values of 10⁻⁵ and 10⁻⁶. Therefore, the risk from a natural gas transmission pipeline is low compared with risk at the building separated minimum distance from chemical industries.