Spatial distribution of aerosol pollution based on MODIS data over Beijing, China

With the help of regression analysis,the relationships were detected between aerosol's contribution to apparent reflectance(ACR) derived from Moderate Resolution Imaging Spectroradiometer(MODIS)on board Terra and hourly PM_(10)mass concentration measured at 30 ground-based locations in Beijing for the August of 2003 and 2004.It was shown that there was a good correlation between the ACR and PM_(10)(linear correlation coefficient,R=0.56).On the basis of this relationship,spatial distribution and possible sources of PM_(10)derived from MODIS were analyzed and two frequently heavily-polluted regions were found,namely downtown of the city and the district near Xishan Mountain.These two regions coincidently are also urban heat island centers.The foundings of this paper will be greatly useful for environmental monitoring and urban planning for Beijing,especially for the 2008 Olympic game to be held in Beijing.     

Thermodynamics and kinetics of cadmium adsorption onto oxidized granular activated carbon

Cadmium sorption behavior of granular activated carbon oxidized with nitric acid was systematically studied by sets of the equilibrium and time-based experiments under various conditions.The cadmium adsorption capacity of oxidized granular activated carbon enlarged with an increase in pH,and reduced with an increase in ionic strength.Experimental data were evaluated to find out kinetic characteristics.Adsorption processes were found to follow pseudo-second order rate equation.Adsorption isotherms correlate well with the Langmuir isotherm model and the maximum sorption capacity of cadmium evaluated is 51.02μmol/g.Thermodynamic parameters were calculated based on Van't Hoff equation.Equilibrium constant Kd was evaluated from Freundlich isotherm model constants,Langmnir isotherm model constants,and isotherms,respectively.The average change of standard adsorption heatΔH~0 was -25.29 kJ/mol.NegativeΔH~0 andΔG~0 values indicate the adsorption process for cadmium onto the studied activated carbon is exothermic and spontaneous.The standard entropyΔS~0 was also negative,which suggests a decrease in the freedom of the system.     

聚氨酯泡沫材料阴燃发展过程的特性分析

分析对比了相同加热条件下的聚氨酯泡沫材料在有氧和无氧气氛下的升温过程,并对不同加热条件下的聚氨酯泡沫材料的阴燃传播速度进行研究.结果表明:沿着反应进行的方向,分离点的温度越来越低,不同热流条件下的温度分离曲线斜率在实验稳定发展段的变化规律表现得很相似,并在分离点出现后,有氧气氛中的该位置温度在短时间内急剧上升;在阴燃不稳定传播阶段时,热解前锋的速度小于氧化前锋的速度,在稳定传播阶段时,热解前锋速度与氧化前锋速度近乎相等.     

三峡消落带沉积物-大气界面汞交换通量及其影响因素

应用动力通量箱(Dynamic Flux Chamber,DFC)与高时间分辨率的RA-915+自动汞分析仪联用技术,在消落带沉积物出露期,野外现场监测沉积物-大气界面汞交换通量,同时对其影响因素进行了分析。结果表明:三峡库区消落带沉积物-大气界面汞交换通量范围为-6.80±12.35~28.17±36.17 ng/(m2·h)晴天库区消落带沉积物-大气界面汞交换通量表现出相同的变化趋势,即从早晨开始沉积物-大气界面汞的交换通量逐渐增加,到正午左右达到峰值,之后交换通量逐渐减小,但阴天这一趋势不明显。暖季白天沉积物-大气界面汞交换通量都以释放为主,冷季白天则以沉降为主。暖季晴天,沉积物-大气汞交换通量与气温、沉积物温度、光照强度呈显著正相关关系,与相对湿度呈显著负相关关系。无论晴天还是阴天,大气汞浓度都与沉积物-大气汞交换通量呈负相关关系。白天,光照强度和大气汞浓度是影响消落带沉积物/大气界面汞交换通量的主要因素,而在夜间,沉积物温度和大气汞浓度是其主要影响因素。     

城市生态系统复合下垫面碳通量特征——以上海市奉贤大学城为例

随着城市化进程的加速和城市人口规模的增加,城市已成为最大的碳源,研究城市生态系统对大气二氧化碳的贡献成为碳循环研究的焦点问题之一。基于研究区域内土地利用现状和一年的涡动观测系统观测数据,结合地理信息技术(Arc GIS)和通量计算工具(Eddypro及ART Footprint Tool)以及碳通量足迹模型分析了上海奉贤大学城碳通量足迹特征,基于此探讨不同下垫面类型,包括以草本和木本等透水层为主的下垫面(称为自然系统),以建筑物、道路等不透水层为主的下垫面(称为社会系统)碳通量的变化特征。研究结果表明:1)在不同风向上,碳通量贡献区范围随着大气稳定度的增加而扩大。大气处于稳定条件下,非主风向上的碳通量贡献区范围(最大范围1 100 m)比主风向上的碳通量贡献区范围(最大范围780m)要大;当大气处于不稳定条件下时主风向和非主风向下的碳通量贡献区范围相差不大(最大范围分别为321和351m)。2)不同下垫面其源汇特征不同,以绿色植物为主的自然系统年碳通量均值为–4.1μmol/m~2/s,表现为碳汇;社会系统的年碳通量均值为8.6μmol/m~2/s,表现为碳源。3)自然系统的碳通量日变化具有较明显的季节分异,变化特征大致呈"U"型;社会系统的碳通量日变化没有明显的季节分异,变化特征大致呈"M"型。绿色植物对城市生态系统的大气二氧化碳有降低作用,结合自然和社会系统的碳通量变化特征可以为以后合理规划城市布局,建立低碳城市提供服务。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Experimental investigation of a 250-kW turbine organic Rankine cycle system for low-grade waste heat recovery

An organic Rankine cycle (ORC) is generally used for converting low-grade heat into electricity. In this study, an extensive literature survey was conducted to identify current research gaps on experimental ORC systems. Specifically, there is limited experimental data and limited details on thermal and expander efficiencies of ORC systems. In order to address these gaps, the objective of this study included developing a turbine ORC with a power output exceeding 50 kW and thermal efficiency exceeding 8% for a heat source temperature < 120°C. The experimental results indicated that the system achieved a net power output of 242.5 kW and a thermal efficiency of 8.3% (the highest value for a turbine ORC system for the heat source temperature below 120°C). Thus, the study addressed the gaps identified in the research area of ORCs.     

近60a长三角地区极端高温事件变化特征及其对城市化的响应

基于长三角地区1951~2014年56个国家级气象站点逐日气温记录资料,通过计算极端高温事件相关指标(极端最高温TXx,极端最低温TNn,高温日数Htd和低温日数Ltd),利用GIS空间分析技术和Mann-Kendall时间趋势分析方法分析了长三角地区近60 a极端高温事件的空间分异特征和时间变化趋势,并探讨了城市化发展对区域极端高温事件时空变异的影响。结果表明:(1)长三角地区极端高温事件指标均表现为一定的上升趋势,极端低温指标(TNn和Ltd)线性变化趋势比极端高温指标(TXx和Htd)更为显著,变化趋势最显著的地区集中在经济和城市化水平较高的城市及周边地区(如上海、杭州等)。(2)极端高温指标(TXx和Htd)多年平均总体表现为南高北低,西高东低的趋势,而极端低温指标中TNn多年平均为由中部向南北两侧降低,Ltd多年平均呈现自中部向南北南侧增多的趋势。(3)从1990~2000到2000~2010年,城市化对极端高温事件的影响增强,快速城市化对北部城市极端高温事件的影响高于南部城市。