全聚苯胺太阳能电池材料的制备和性能

采用电化学和化学的方法制备了硫酸掺杂的p型导电聚苯胺和萘钠掺杂的n型导电聚苯胺,采用扫描电镜、X衍射分析、红外、紫外-可见分光光度计和和四探针法等手段对各种聚苯胺的形貌、结构和导电性等能进行了分析;将p型和n型导电聚苯胺组装成太阳能电池,研究了材料的结构、性能、电池的组装方式对太阳能电池性能的影响.结果表明:制备的p型和n型导电聚苯胺呈球形,堆砌结实,平均粒径在30—50nm,结晶度较大,导电性优异,在可见光区有强烈的吸收;由两者组成的双层太阳能电池性能优异,其开路电压为1.65V,短路电流为1.66mA.cm-2,填充因子为0.35,光电转换效率为2.96%.     

模拟酸雨对薇甘菊种子萌发和幼苗生长的影响

薇甘菊是入侵性杂草,已在我国华南地区及云南部分地区造成严重危害。我国华南地区同时也是强酸雨分布区域。采用不同pH值的模拟酸雨对薇甘菊种子及幼苗进行处理,测定其对种子萌发和幼苗生长的影响。测定了不同pH值下薇甘菊幼苗叶绿素含量、丙二醛含量、脯氨酸含量、超氧阴离子产生速率、超氧化物歧化酶和过氧化物酶活性。结果表明,薇甘菊种子具有较强的耐酸能力,pH≥3．5时均能正常萌发,pH≤3．0时不能萌发。不同pH值模拟酸雨对薇甘菊幼苗叶绿素含量影响不显著。随着模拟酸雨pH值下降,超氧阴离子产生速率上升,丙二醛含量、脯氨酸含量、超氧化物歧化酶活性和过氧化物酶活性呈先上升后下降。pH3．5时,丙二醛含量、脯氨酸含量、过氧化物酶活性均达最大值;pH4．0时超氧化物歧化酶活性达最大值。结果表明薇甘菊对华南地区酸雨胁迫表现出适应。     

新型单室无质子膜微生物燃料电池性能研究

采用不锈钢金属丝阳极构建了管状单室无质子交换膜空气阴极微生物燃料电池(MFC),并以葡萄糖为唯一电子供体,研究MFC的性能.在室温下,初始ρ(CODCr)为496 mg/L,外接电阻为1 000 Ω时,该MFC可以连续产电,最高电压达235.11 mV,开路电压为461.00 mV,内电阻约2 820 Ω.实验条件下测得该MFC的最大功率密度为137.1 mW/m2,库仑效率为32.4%.采用该MFC进行了啤酒酿造废水处理对比实验,在进水ρ(CODCr)为15 900 mg/L,停留时间为96 h下,MFC对废水CODCr的去除率达40%～55%,比厌氧生物处理效率高5%～10%.表明MFC技术可以在获得电能的同时,强化有机废水的生物处理过程.     

Pre-feasibility study of stand-alone hybrid energy systems for applications in eco-houses

In light of rising cost of fossil fuels and fears of its depletion, coupled with the increase in energy demand and the rise in pollution levels, governments worldwide have had to look at alternative energy resources. Combining renewable energy generation like solar power with superior storage and conversion technology such as hydrogen storage, fuel cells and batteries offers a potential solution for a stand-alone power system. The aim of this paper was to assess the techno-economic feasibility of using a hybrid energy system with hydrogen fuel cell for application in an eco-house that will be built in Sultan Qaboos University, Muscat, Oman. Actual load data for a typical Omani house of a similar size as the eco-house was considered as the stand-alone load with an average energy consumption of 40 kW/day and 5 kW peak power demand. The National Renewable Energy Laboratory's Hybrid Optimisation Model for Electric Renewable software was used as a sizing and optimisation tool for the system. It was found that the total annual electrical energy production is 42,255 kW and the cost of energy for this hybrid system is 0.582 $/kW. During daylight time, when the solar radiation is high, the photovoltaics (PV) panels supplied most of the load requirements. Moreover, during the evening time the fuel cell mainly serves the house with the help of the batteries. The proposed system is capable of providing the required energy to the eco-house during the whole year using only the solar irradiance as the primary source.     

氢燃料电池汽车动力系统生命周期评价及关键参数对比

发展氢燃料电池汽车被认为是解决能源安全和环境污染问题的理想解决方案之一,为量化探究氢燃料电池汽车动力系统的化石能源消耗和排放情况,运用GaBi软件建模,以新能源汽车相关技术路线为参考,构建我国氢燃料电池汽车动力系统的数据清单并对其全生命周期化石能源消耗和全球变暖潜值情况进行定量评价计算和预测分析,对不同类型的双极板、不同能量控制策略和不同制氢方式对环境的影响分别进行了对比研究,并对关键数据进行了不确定分析.结果表明,预计到2030年我国每台氢燃料电池汽车动力系统生命周期的化石能源消耗量（ADP_f）、全球变暖潜值（GWP,以CO₂ eq计）和酸化潜值（AP,以SO₂ eq计）分别为1.35×10⁵ MJ、9108 kg和15.79 kg.动力系统生产制造阶段的化石能源消耗和全球变暖潜值均高于使用阶段,主要原因是燃料电池堆栈和储氢罐的制造过程.金属双极板、石墨复合双极板和石墨双极板的制造工艺中石墨复合双极板的综合环境效益最好.能量控制策略的优化会使得氢能消耗降低,当氢能消耗降低22.8%时,动力系统的生命周期化石能源消耗和全球变暖潜值分别降低10.4%和8.3%.相比于甲烷蒸气重整制氢,基于混合电网电解水制氢的动力系统生命周期全球变暖潜值高出53.7%[KG-*6],而基于水电电解水制氢降低39.6%.降低动力系统生命周期化石能源消耗和全球变暖潜值的措施包括优化能量控制策略降低氢能消耗、规模化发展可再生能源发电电解水制氢产业和聚焦突破燃料电池堆栈关键技术实现性能提升.     

镉胁迫下两种不同小白菜的生长、镉吸收及其亚细胞分布特征

通过室内溶液培养试验,研究了镉（0.5 m·gL-1、5.0 m·gL-1）胁迫对两个不同镉耐性小白菜品种上海青（Cd敏感型）和杭油冬（Cd耐性）的生长、Cd吸收及亚细胞分布的影响.结果表明,高Cd胁迫10 d后两个小白菜生长受到严重抑制,植物地上部和地下部Cd含量随着Cd处理浓度的增加而增加,且Cd主要积累在植物的根...     

基于细胞尺度的光照对四尾栅藻生长的影响

以四尾栅藻（Scenedesmus quadricauda）为研究对象,采用平行平板流动腔装置,基于计算机视觉的藻细胞动态生长观察方法,从单细胞尺度研究不同光照强度对四尾栅藻藻细胞生长的影响.成功建立了四尾栅藻个体生长曲线模型,模型拟合效果良好.结果表明：在8000lux光照强度下,藻细胞的体积最大比生长速率最大,即四尾栅藻生长的最适光照强度为8000lux;适宜的光照条件可以增加藻细胞分裂时的大小,小于8000lux时,藻细胞分裂体积随着光照强度的增加而增加,大于8000lux时,藻细胞分裂时体积反而越来越小;较高的光照强度还有利于藻细胞适应新的环境,减少藻细胞复苏时间.     

石墨烯/聚苯胺修饰阴极对反硝化MFC性能影响

反硝化生物阴极微生物燃料电池（MFC）以电极为电子供体,在自养条件下完成硝酸盐去除过程.本研究以碳布（CC）为基底材料,分别制备获得还原氧化石墨烯修饰（rGO-CC）,聚苯胺修饰（PANI-CC）及二者复合修饰的CC电极（rGO/PANI-CC）,并考察其作为阴极材料对反硝化生物阴极MFC产电脱氮性能的影响.扫描电镜结果显示,rGO-CC和PANI-CC的碳纤维分别被片层状rGO和网状PANI覆盖,而rGO/PANI-CC表面呈现PANI在附着rGO的碳纤维上团聚的形貌,均增大了碳布的比表面积.循环伏安测试显示,rGO/PANI-CC具有最高的电化学活性.以rGO-CC,PANI-CC和rGO/PANI-CC为阴极构建MFC的产电能力分别提高了82%,24%和41%,其阴极对NO₃^--N的去除能力增强了23%,9%和13%.16S rDNA测序结果揭示修饰后电极表面微生物的多样性下降,Stappia和Pacacoccus属微生物的丰度增加.     

双酚AF诱导乳腺癌细胞增殖的分子机制

从细胞水平上研究不同浓度双酚AF （BPAF）对MCF-7人乳腺癌细胞系的细胞增殖能力、细胞凋亡、细胞周期等终点的影响;以新型雌激素膜受体GPER1介导的PI3K/Akt和ERK1/2信号通路为靶点,研究低浓度BPAF对该信号通路相关基因表达的影响,以及其在诱导乳腺癌细胞增殖中的作用,评估其增殖效应机制.结果表明,低浓度BPAF （0.001~1μmol/L）能够诱导MCF-7细胞的增殖,使S期细胞比例升高,并且激活雌激素信号通路相关基因mRNA的表达;在较高浓度时（>10μmol/L）能抑制细胞活力,诱导细胞凋亡.通过特异性靶点抑制剂发现GPER1在mRNA层面上激活了PI3K/Akt和ERK1/2信号通路,并且该信号通路的激活可能是BPAF引起MCF-7细胞增殖的关键机制,并且ERα也在其中起到了重要的作用.     

Programmed cell death induced by modified clay in controlling Prorocentrum donghaiense bloom

Modified clay (MC), an effective material used for the emergency elimination of algal blooms, can rapidly reduce the biomass of harmful algal blooms (HABs) via flocculation. After that, MC can still control bloom population through indirect effects such as oxidative stress, which was initially proposed to be related to programmed cell death (PCD) at molecular level. To further study the MC induced cell death in residual bloom organisms, especially identifying PCD process, we studied the physiological state of the residual Prorocentrum donghaiense. The experimental results showed that flocculation changed the physiological state of the residual cells, as evidenced by growth inhibition and increased reactive oxygen species production. Moreover, this research provides biochemical and ultrastructural evidence showing that MC induces PCD in P. donghaiense. Nuclear changes were observed, and increased caspase-like activity, externalization of phosphatidylserine and DNA fragmentation were detected in MC-treated groups and quantified. And the mitochondrial apoptosis pathway was activated in both MC-treated groups. Besides, the features of MC-induced PCD in a unicellular organism were summarized and its concentration dependent manner was proved. All our preliminary results elucidate the mechanism through which MC can further control HABs by inducing PCD and suggest a promising application of PCD in bloom control.