The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.     

模拟车用工况下5kW燃料电池尾气净化系统

模拟了车用工况下燃料电池发动机脉冲式排氢的特点,设计开发了一套质子交换膜燃料电池的尾气净化系统,并以5 kW燃料电池的尾气排放为例,研究其净化效果。研究了电池阳极排放氢气缓冲前后尾气中氢气浓度的变化,以及不同空速条件下氢气的去除效果。结果表明：电堆阳极排放氢气经过缓冲处理后,尾气中氢气浓度趋于平稳,大部分工况下处在2%以下,达到了安全处理的要求;尾气中氢气的去除效果与空速密切相关。对自制的整体式催化剂而言,当空速低于20000 h^-1时,氢气的去除率能达到约95%,而当空速达到39270 h^-1时,氢气的去除率仅为10.9%。鉴于这一问题,提出通过采用尾排空气的分流手段调整催化燃烧反应器对空速的要求,以提高尾气中氢气的去除率。     

The effect of alkyl chain length on the degradation of alkylimidazolium- and pyridinium-type ionic liquids in a Fenton-like system

Background, aim, and scope  Ionic liquids are regarded as essentially “green” chemicals because of their insignificant vapor pressure and, hence, are a good alternative to the emissions of toxic conventional volatile solvents. Not only because of their attractive industrial applications, but also due to their very high stability, ionic liquids could soon become persistent contaminants of technological wastewaters and, moreover, break through into natural waters following classical treatment systems. The removal of harmful organic pollutants has forced the development of new methodologies known as advanced oxidation processes (AOPs). Among them, the Fenton and Fenton-like reactions are usually modified by the use of a higher hydrogen peroxide concentration and through different catalysts. The aim of this study was to assess the effect of hydrogen peroxide concentration on degradation rates in a Fenton-like system of alkylimidazolium ionic liquids with alkyl chains of varying length and 3-methyl-N-butylpyridinium chloride. Materials and methods  The ionic liquids were oxidized in dilute aqueous solution in the presence of two different concentrations of hydrogen peroxide. All reactions were performed in the dark to prevent photoreduction of Fe(III). The concentrations of ionic liquids during the process were monitored with high-performance liquid chromatography. Preliminary degradation pathways were studied with the aid of ¹H NMR. Results  Degradation of ionic liquids in this system was quite effective. Increasing the H₂O₂ concentration from 100 to 400 mM improved ionic liquid degradation from 57–84% to 87–100% after 60 min reaction time. Resistance to degradation was weaker, the shorter the alkyl chain. Discussion  The compound omimCl was more resistant to oxidation then other compounds, which suggests that the oxidation rates of imidazolium ionic liquids by OH· are structure-dependent and are correlated with the n-alkyl chain length substituted at the N-1-position. The level of degradation was dependent on the type of head group. Replacing the imidazolium head group with pyridinium increased resistance to degradation. Nonetheless, lengthening the alkyl chain from four to eight carbons lowered the rate of ionic liquid degradation to a greater extent than changing the head group from imidazolium to pyridinium. 1H-NMR spectra show, in the first stage of degradation, that it is likely that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Conclusions  The proposed method has proven to be an efficient and reliable method for the degradation of imidazolium ionic liquids by a Fenton-like reagent deteriorated with lengthening n-alkyl substituents and by replacing the imidazolium head group with pyridinium. The enhanced resistance of 1-butyl-3-methylpyridinium chloride when the resistance of imidazolium ionic liquids decreases with increasing H₂O₂ concentration is probably indicative of a change in the degradation mechanism in a vigorous Fenton-like system. H-NMR spectra showed, in the first stage of degradation, that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Recommendations and perspectives  Since ionic liquids are now one of the most promising alternative chemicals of the future, the degradation and waste management studies should be integrated into a general development research of these chemicals. In the case of imidazolium and pyridinium ionic liquids that are known to be resistant to bio- or thermal degradation, studies in the field of AOPs should assist the future structural design as well as tailor the technological process of these chemicals     

Spatial identification by satellite imagery of the crop–fallow rotation cycle in northern Laos

In the mountainous regions of northern Laos, shifting cultivation, or slash-and-burn agriculture, is widely practiced. However, the crop–fallow rotation cycle is becoming shorter owing to forest conservation policies and population pressure, causing loss of productivity that deleteriously affects farmers’ livelihoods in the region. To investigate regional land use conditions, we have developed a method of identifying the crop–fallow rotation cycle from Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper+ (ETM+) data. We assessed the impact of the identified cycle on plant production measured by Normalized Difference Vegetation Index (NDVI). The study site was an area in Luang Prabang Province. Using eight TM and ETM+ images acquired annually from 1995 to 2003, except for 1998, when cloud-free data were not collected, we classified land use in each year as crop or fallow by the presence of vegetation in the late dry season. Conformity with fallow age determined by field investigation was 69.1%. The cultivation frequency from 1995 to 2002 showed that 77,000 ha (17.3% of the study site) had not been used for cropping during the period, but 41,000 ha (9.2%) had been used every year. Of the study site, 129,000 ha (29.1%) was cultivated one or two times, 83,000 ha (18.7%) was three or four times, and 54,000 ha (12.2%) was five or six times. The NDVI of crops in November did not provide sufficient evidence to prove the assumption that a longer fallow period would result in better crop yields. Instead, the regeneration of fallow vegetation was evidenced by the higher NDVI values after longer fallow. More than 8 years would be needed to reach the same NDVI as forest. From the produced maps indicating fallow age and cultivation frequency, we found that areas with high potential for regeneration decreased as cultivation frequency increased. Areas near rivers were intensively used, and fallow length was accordingly short. Low-potential areas were found in the western basin of the Mekong River. This spatial information can be used to detect areas where biomass productivity is at high risk of deteriorating. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Methanogenic activity of woody debris

The paper is devoted to the phenomenon of methanogenic activity of woody debris, i.e., methane production in the course of wood decomposition by fungi, which are not directly involved in methane synthesis but form an initial link in the trophic chain leading to methanogenic archaea. Expert evaluation of probable amounts of methane emission is made. The results show that woody debris is an important global source of this greenhouse gas.     

One laptop per child,local refurbishment or overseas donations? Sustainability assessment of computer supply scenarios for schools in Colombia

With the intention of bridging the ‘digital divide’ many programmes have been launched to provide computers for educational institutions, ranging from refurbishing second hand computers to delivering low cost new computers. The fast and economical provision of large quantities of equipment is one of the many challenges faced by such programmes. If an increase is to be achieved in the sustainability of computer supplies for schools, not only must equipment be provided, but also suitable training and maintenance delivered. Furthermore, appropriate recycling has to be ensured, so that end-of-life equipment can be dealt with properly. This study has evaluated the suitability of three computer supply scenarios to schools in Colombia: (i) ‘Colombian refurbishment’, -refurbishment of computers donated in Colombia, (ii) ‘Overseas refurbishment’, -import of computers which were donated and refurbished abroad, and (iii) ‘XO Laptop’, -purchase of low cost computers manufactured in Korea. The methods applied were: Material Flow Assessment, -to assess the quantities-, Life Cycle Assessment, -to assess the environmental impacts, and the application of the Multiple Attribute Utility Theory, -to analyse, evaluate and compare different scenarios. The most sustainable solution proved to be the local refurbishment of second hand computers of Colombian origin to an appropriate technical standard. The environmental impacts of such practices need to be evaluated carefully, as second hand appliances have to be maintained, require spare parts and sometimes use more energy than newer equipment. Providing schools with second hand computers from overseas and through programmes such as ‘One Laptop Per Child’ has the disadvantage that the potential for social improvements – such as creation of jobs and local industry involvement – is very low.     

镁合金在笔记本电脑外壳材料替代中的环境协调性评价

本文应用生命周期评价,（life cycle assessment,LCA）方法,对镁合金以及塑料这两种笔记本电脑外壳进行了初步评价和比较,结果表明镁舍金能源消耗、温室效应方面为塑料的556．31％、383．30%。但在材料的性能、资源消耗、酸化效应、生态毒理、材料的再生性等方面明显优于塑料。     

对水泥企业生产环境负荷之浅析

基于生命周期理论,采用CNI环境影响评价方法对我国水泥生产的环境负荷进行了定量分析。结果表明：水泥生产的环境影响主要体现在温室效应、不可再生能源消耗和不可再生资源消耗,其环境负荷分别占对应环境影响类型世界总负荷的2.76％,2.34％和1.39％,2006年我国水泥生产的环境负荷约占世界总负荷的1.28％,其中,立窑生产工艺、湿法回转窑生产工艺和新型干法生产工艺的环境负荷分别为0.84％,0.12％和0.32％。通过行业结构调整,用新型干法生产工艺取代其他落后的生产工艺,可使我国水泥生产的环境负荷降至世界总负荷的1％左右。     

Conversion of a Missouri River Dam and Reservoir to a Sustainable System: Sediment Management1

Abstract: A present and future challenge for water resources engineers is to extend the useful life of our dams and reservoirs. Ongoing reservoir sedimentation in impoundments must be addressed; sedimentation in many reservoirs already limits project benefits and effective project life. Sustainability requires that incoming sediment be moved downstream past the impounding dam. We use Lewis and Clark Lake, the most downstream of the six Missouri River main stem reservoirs, to demonstrate how a reservoir in advanced stages of its project life could be converted to a sustainable system with local benefits exceeding costs by a factor of 1.5. Full consideration of benefits would further enhance project justification. The proposed strategy involves four phases that will take about 50 years to complete. Cost estimates for this potential project range from the quantitative to the plausible, but it is clear that the results justify a full engineering, environmental, and economic study of this model project. If implemented, the project will create scientific knowledge and develop technologies useful for achieving sustainability at many other reservoirs in the Mississippi River basin and beyond.