Estimates of species- and ecosystem-level respiration of woody stems along an elevational gradient in the Luquillo Mountains, Puerto Rico

We measured CO₂ efflux from stems of seven subtropical tree species situated along an elevational gradient in the Luquillo Mountains, Puerto Rico and scaled these measurements up to the landscape level based on modeled and empirical relations. The most important determinants of ecosystem stem respiration were species composition and stem temperature. At a species scale, measured CO₂ efflux per unit bole surface area at a given temperature was highest in the early successional species Cecropia schreberiana and lowest in species that inhabit high elevations such as Micropholis garciniifolia and Tabebuia rigida. Carbon dioxide efflux rates followed a diel pattern that lagged approximately 6 h behind changes in sapwood temperatures. At an ecosystem scale, our simulation model indicates a decreasing trend of stem respiration rates with increasing elevation due to shifts in species composition, lower temperatures and reductions in branch surface area. The highest estimated stem respiration rates were present in the lowland tabonuco forest type and the lowest rates were present in the elfin forest type (mean 7.4 and 2.1 Mg C ha⁻¹ yr⁻¹, respectively). There was slight temperature-induced seasonal variation in simulated stem respiration rates at low elevations, with a maximum difference of 19% between the months of February and July. Our results coincide well with those of Odum and Jordan [Odum, H.T., Jordan, C.F., 1970. Metabolism and evapotranspiration of the lower forest in a giant plastic cylinder. In: Odum, H.T., Pigeon, R.F. (Eds.), A Tropical Rain Forest: A Study of Irradiation and Ecology at El Verde, Puerto Rico. U.S. Atomic Energy Commission, Oak Ridge, TN, pp. I165–I189] for the tabonuco forest type and extend their work by presenting estimates and spatial patterns of woody tissue respiration for the entire mountain rather than for a single forested plot.     

多环芳烃室内土柱淋溶行为的CDE模型模拟

采用土柱淋溶实验方法对多环芳烃(PAHs)在人工污染士柱中表面活性剂淋溶下的运移进行了实验室研究,获得了示踪剂Br^-和PAHs的穿透曲线(BTCs);并通过室内批量平衡试验(PAHs和表面活性剂吸附试验和表面活性剂对PAHs吸附／解吸影响试验)获得了吸附系数,进而获得阻滞因子．基于这些实验室结果,通过CXTFIT2．1软件,用平衡CDE模型拟合了Br^-的BTCs,获得物理和水动力参数;并在此基础上应用CDE非平衡模型拟合PAHs在表面活性剂淋溶条件下土柱中的BTCs以及不同时刻、不同埋深处PAHs浓度的动态变化,预测了PAHs在土柱中的迁移趋势。     

Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals in South and Southeast Asian mussels

A comprehensive monitoring survey for polycyclic aromatic hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals (EDCs) utilizing mussels as sentinel organisms was conducted in South and Southeast Asia as a part of the Asian Mussel Watch project. Green mussel (Perna viridis) samples collected from a total of 48 locations in India, Indonesia, Singapore, Malaysia, Thailand, Cambodia, Vietnam, and the Philippines during 1994–1999 were analyzed for PAHs, EDCs including nonylphenol (NP), octylphenol (OP) and bisphenol A (BPA), and linear alkylbenzenes (LABs) as molecular markers for sewage. Concentrations of NP ranged from 18 to 643 ng/g-dry tissue. The highest levels of NP in Malaysia, Singapore, the Philippines, and Indonesia were comparable to those observed in Tokyo Bay. Elevated concentrations of EDCs were not observed in Vietnam and Cambodia, probably due to the lower extent of industrialization in these regions. No consistent relationship between concentrations of phenolic EDCs and LABs were found, suggesting that sewage is not a major source of EDCs. Concentrations of PAHs ranged from 11 to 1,133 ng/g-dry, which were categorized as “low to moderate” levels of pollution. The ratio of methylphenanthrenes to phenanthrene (MP/P ratio) was >1.0 in 20 out of 25 locations, indicating extensive input of petrogenic PAHs. This study provides a bench-mark for data on the distribution of anthropogenic contaminants in this region, which is essential in evaluating temporal and spatial variation and effect of future regulatory measures.     

Determination of Nitrobenzene in Wastewater Using a Hanging Mercury Drop Electrode

The determination of trace amount nitrobenzene in wastewater on a hanging mercury drop electrode was studied. The determination conditions of pH, supporting electrolyte, accumulation potential, accumulation time, and voltammetric response were optimized. The sharp peak of the nitrobenzene was appeared at 0.05 V. The peak electric current was proportional to the concentration of nitrobenzene in the range of 1.47 × 10⁻⁵ ∼ 1.0 × 10⁻³ mol/l with relative standard deviations of 3.99 ∼ 8.94%. The detection limit of the nitrobenzene in water was 5 × 10⁻⁶ mol/l. The proposed method offered low limit of determination, easy operation, the use of simple instrumentation, high sensitivity and good reproducibility. It was applied to the determination of nitrobenzene in wastewater with an average recovery of 94.0% ∼ 105%. The proposed method provided fast, sensitive and sometimes real time detection of nitrobenzene.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

Uncertainty in integrated coastal zone management

Uncertainty plays a major role in Integrated Coastal Zone Management (ICZM). A large part of this uncertainty is connected to our lack of knowledge of the integrated functioning of the coastal system and to the increasing need to act in a pro-active way. Increasingly, coastal managers are forced to take decisions based on information which is surrounded by uncertainties. Different types of uncertainty can be identified and the role of uncertainty in decision making, scientific uncertainty and model uncertainty in ICZM is discussed. The issue of spatial variability, which is believed to be extremely important in ICZM and represents a primary source of complexity and uncertainty, is also briefly introduced. Some principles for complex model building are described as an approach to handle, in a balanced way, the available data, information, knowledge and experience. The practical method of sensitivity analysis is then introduced as a method for a posterior evaluation of uncertainty in simulation models. We conclude by emphasising the need for the definition of an analysis plan in order to handle model uncertainty in a balanced way during the decision making process.     

B—P网络逐步聚类法在环境测点优选中的应用

将Ｂ－Ｐ网络原理与逐步聚类分析思想相结合,用于环境测点聚类优选。该方法用于水清河几个监测断面的优选结果是符合客观实际的。     

AERMOD在国内环境影响评价中的实例验证与应用

AERMOD是美国环保局推出的新一代空气质量模式系统,它由AERMET(气象数据预处理器)、AERMAP(地形数据预处理器)和AERMOD(大气扩散模型)3部分组成.结合宁波市北仑区域大气环境影响评价,对该模式系统进行模式验证,并应用于实际预测评价.验证结果表明,在采用适当的模型参数时,该系统预测值与实际监测值具有很好的一致性,SO2、NO2日均最高浓度预测准确率分别达到64.3%和85.7%.最后结合实际预测评价工作,提出AERMOD模式系统在国内环境影响评价工作中的优势及不足.     

一株产絮凝剂的黑曲霉的分离及培养条件优化

从活性污泥中筛选出一株产絮凝剂的霉菌,初步鉴定为黑曲霉(Aspergillus niger).其所产生的微生物絮凝剂对高岭土悬浊液具有良好的絮凝作用.通过培养条件优化,其所产生的微生物絮凝剂对高岭土悬浊液的絮凝率从85.6%提高到98.7%,实验结果表明,(1)黑曲霉孢子最佳接种量为9.33×108 个/L;(2)产絮凝剂适宜的碳源为蔗糖,氮源为尿素,用量分别为30.00、1.600 g/L;(3)最佳培养条件为:查氏液体培养基初始pH 7.0,培养温度30℃,摇床转速180 r/min,培养时间120 h;(4)在最佳培养条件下微生物絮凝剂的产量为1.805 g/L;(5)絮凝性能比较结果表明,微生物絮凝剂的絮凝性能优于传统絮凝剂.     

循环经济调控模式研究

借鉴国内外循环经济探索的最新成果,立足国情,研究提出发展循环经济的基本模式和政策措施,主要内容包括四个方面:循环经济理论;国外发展循环经济的实践与探索;我国发展循环经济的基本模式;我国发展循环经济的政策措施。