Optimal biomass allocation in heterogeneous environments in a clonal plant—Spatial division of labor

When interconnected ramets of clonal plants are growing in heterogeneous environments, ramets may specialize to uptake locally abundant resources rather than scarce resources. This biomass allocation pattern may result in more efficient sharing of resources through physiological integration and an overall benefit to the plants (spatial division of labor; DoL).     

Estimates of species- and ecosystem-level respiration of woody stems along an elevational gradient in the Luquillo Mountains, Puerto Rico

We measured CO₂ efflux from stems of seven subtropical tree species situated along an elevational gradient in the Luquillo Mountains, Puerto Rico and scaled these measurements up to the landscape level based on modeled and empirical relations. The most important determinants of ecosystem stem respiration were species composition and stem temperature. At a species scale, measured CO₂ efflux per unit bole surface area at a given temperature was highest in the early successional species Cecropia schreberiana and lowest in species that inhabit high elevations such as Micropholis garciniifolia and Tabebuia rigida. Carbon dioxide efflux rates followed a diel pattern that lagged approximately 6 h behind changes in sapwood temperatures. At an ecosystem scale, our simulation model indicates a decreasing trend of stem respiration rates with increasing elevation due to shifts in species composition, lower temperatures and reductions in branch surface area. The highest estimated stem respiration rates were present in the lowland tabonuco forest type and the lowest rates were present in the elfin forest type (mean 7.4 and 2.1 Mg C ha⁻¹ yr⁻¹, respectively). There was slight temperature-induced seasonal variation in simulated stem respiration rates at low elevations, with a maximum difference of 19% between the months of February and July. Our results coincide well with those of Odum and Jordan [Odum, H.T., Jordan, C.F., 1970. Metabolism and evapotranspiration of the lower forest in a giant plastic cylinder. In: Odum, H.T., Pigeon, R.F. (Eds.), A Tropical Rain Forest: A Study of Irradiation and Ecology at El Verde, Puerto Rico. U.S. Atomic Energy Commission, Oak Ridge, TN, pp. I165–I189] for the tabonuco forest type and extend their work by presenting estimates and spatial patterns of woody tissue respiration for the entire mountain rather than for a single forested plot.     

多环芳烃室内土柱淋溶行为的CDE模型模拟

采用土柱淋溶实验方法对多环芳烃(PAHs)在人工污染士柱中表面活性剂淋溶下的运移进行了实验室研究,获得了示踪剂Br^-和PAHs的穿透曲线(BTCs);并通过室内批量平衡试验(PAHs和表面活性剂吸附试验和表面活性剂对PAHs吸附／解吸影响试验)获得了吸附系数,进而获得阻滞因子．基于这些实验室结果,通过CXTFIT2．1软件,用平衡CDE模型拟合了Br^-的BTCs,获得物理和水动力参数;并在此基础上应用CDE非平衡模型拟合PAHs在表面活性剂淋溶条件下土柱中的BTCs以及不同时刻、不同埋深处PAHs浓度的动态变化,预测了PAHs在土柱中的迁移趋势。     

模糊识别在水质综合评价中的应用

应用模糊数学方法对水质进行综合评价,其关键问题是如何合理地确定各评价指标的权重．将最优权法引入模糊评价以确定各评价指标的权系数．通过求解权向量的最优解来确定各指标权重,可避免确定评价指标权重的主观任意性,增加评价结果的分辨性．实例计算与结果对比表明,该方法克服了各指标的权系数随实测样本的不同而变化和评价结果分辨性差的缺点,提高了模型的通用性和评价结果的可比性,同时也简化了多次重复确定权系数的工作量．     

Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals in South and Southeast Asian mussels

A comprehensive monitoring survey for polycyclic aromatic hydrocarbons (PAHs) and phenolic endocrine disrupting chemicals (EDCs) utilizing mussels as sentinel organisms was conducted in South and Southeast Asia as a part of the Asian Mussel Watch project. Green mussel (Perna viridis) samples collected from a total of 48 locations in India, Indonesia, Singapore, Malaysia, Thailand, Cambodia, Vietnam, and the Philippines during 1994–1999 were analyzed for PAHs, EDCs including nonylphenol (NP), octylphenol (OP) and bisphenol A (BPA), and linear alkylbenzenes (LABs) as molecular markers for sewage. Concentrations of NP ranged from 18 to 643 ng/g-dry tissue. The highest levels of NP in Malaysia, Singapore, the Philippines, and Indonesia were comparable to those observed in Tokyo Bay. Elevated concentrations of EDCs were not observed in Vietnam and Cambodia, probably due to the lower extent of industrialization in these regions. No consistent relationship between concentrations of phenolic EDCs and LABs were found, suggesting that sewage is not a major source of EDCs. Concentrations of PAHs ranged from 11 to 1,133 ng/g-dry, which were categorized as “low to moderate” levels of pollution. The ratio of methylphenanthrenes to phenanthrene (MP/P ratio) was >1.0 in 20 out of 25 locations, indicating extensive input of petrogenic PAHs. This study provides a bench-mark for data on the distribution of anthropogenic contaminants in this region, which is essential in evaluating temporal and spatial variation and effect of future regulatory measures.     

Determination of Nitrobenzene in Wastewater Using a Hanging Mercury Drop Electrode

The determination of trace amount nitrobenzene in wastewater on a hanging mercury drop electrode was studied. The determination conditions of pH, supporting electrolyte, accumulation potential, accumulation time, and voltammetric response were optimized. The sharp peak of the nitrobenzene was appeared at 0.05 V. The peak electric current was proportional to the concentration of nitrobenzene in the range of 1.47 × 10⁻⁵ ∼ 1.0 × 10⁻³ mol/l with relative standard deviations of 3.99 ∼ 8.94%. The detection limit of the nitrobenzene in water was 5 × 10⁻⁶ mol/l. The proposed method offered low limit of determination, easy operation, the use of simple instrumentation, high sensitivity and good reproducibility. It was applied to the determination of nitrobenzene in wastewater with an average recovery of 94.0% ∼ 105%. The proposed method provided fast, sensitive and sometimes real time detection of nitrobenzene.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

Uncertainty in integrated coastal zone management

Uncertainty plays a major role in Integrated Coastal Zone Management (ICZM). A large part of this uncertainty is connected to our lack of knowledge of the integrated functioning of the coastal system and to the increasing need to act in a pro-active way. Increasingly, coastal managers are forced to take decisions based on information which is surrounded by uncertainties. Different types of uncertainty can be identified and the role of uncertainty in decision making, scientific uncertainty and model uncertainty in ICZM is discussed. The issue of spatial variability, which is believed to be extremely important in ICZM and represents a primary source of complexity and uncertainty, is also briefly introduced. Some principles for complex model building are described as an approach to handle, in a balanced way, the available data, information, knowledge and experience. The practical method of sensitivity analysis is then introduced as a method for a posterior evaluation of uncertainty in simulation models. We conclude by emphasising the need for the definition of an analysis plan in order to handle model uncertainty in a balanced way during the decision making process.     

B—P网络逐步聚类法在环境测点优选中的应用

将Ｂ－Ｐ网络原理与逐步聚类分析思想相结合,用于环境测点聚类优选。该方法用于水清河几个监测断面的优选结果是符合客观实际的。     

Characterization of a medium velocity deluge nozzle for offshore installations

It is important to study the characteristics of the nozzle of the deluge spray to comply with the standards developed by the petroleum industry for offshore installations in Norway. Due to the stochastic nature of the decomposition processes and geometrical features within the nozzle, the deluge spray has a complex flow field. Since the flow field determines the performance of the spray, the present study performs an experimental characterization of a medium velocity deluge nozzle for validation of computational fluid dynamics (CFD) models. The experiment was conducted for a maximum supply water pressure of 8.0 bar (g), which is identical to the operating pressures of offshore installations. Formerly, characterization studies of deluge or sprinkler spray were mostly targeted on residential usage with lower supply water pressures. I utilized a laser-based shadow imaging system to capture high-speed images, which were later processed in MATLAB. A linear patternator was used to validate the results of the shadow imaging technique. The geometrical features of the deluge nozzle played an important role in determining the characteristics of the spray. In addition, the supply water pressure significantly affected the size and velocity distributions of the droplets, applied density (volume flux), and area coverage. However, the Sauter mean diameter did not vary significantly with the azimuthal or radial position of the droplet within the inner region of the spray. The measurements obtained in this study can be used to estimate the extinguishing efficiency of a deluge system for offshore installations with elevated supply water pressures. Deviations between measurements with shadow imaging and patternator technique are discussed and discrepancies are discussed.