带肋薄壁钢管混凝土T形柱温度场试验与数值分析

为研究高温下带肋薄壁钢管混凝土T形截面柱温度场的分布规律,采用电热炉进行了温度场试验,进而采用ABAQUS有限元软件建立模型,与试验结果比较,验证模型的可靠性,在此基础上,分析了标准火灾下构件温度分布规律,构件从受火面到构件截面中部,温度逐渐降低,混凝土温度较钢管和钢筋温度明显滞后,且四个阳角温度高于两个阴角温度。在工程常用范围内,分析了受火时间、截面尺寸和加劲肋间距对构件温度场分布的影响,结果表明:随着构件截面尺寸的增大截面温度呈明显降低趋势,随着受火时间的增加钢管温度和混凝土温度呈不同态势增长,而钢筋加劲肋间距变化对温度场影响较小。     

Model experiment on the dynamic process of oil leakage from the double hull tanker

This paper presents an experimental investigation on oil leakage from the double hull tanker (DHT). It is designed to explore the dynamic process of oil leakage from bottom-rupture hole of DHT. The experimental test shows the leakage resistance mechanism of ballast tank space. The behavior of oil leakage from damaged DHT and dynamic features of flow in the overall process are demonstrated from experimental results. The overall process of oil leakage is divided into free-leakage and resistance-leakage stage according to the corresponding power to study the dynamic features of oil-water flow inside or outside the tank. The corresponding dominated factors of oil leakage in different stage are also pointed out, and the unsteady Bernoulli’s equation is used to verify experimental results. Meanwhile, viscous effect in leakage process is discussed and the importance of hydrodynamic features associated with the mechanism of oil leakage is explored from experimental results.     

Mapping Outlets of Iowa Flood Center and National Water Center River Networks for Hydrologic Model Comparison

River networks based on Digital Elevation Model (DEM) data differ depending on the DEM resolution, accuracy, and algorithms used for network extraction. As spatial scale increases, the differences diminish. This study explores methods that identify the scale where networks obtained by different methods agree within some margin of error. The problem is relevant for comparing hydrologic models built around the two networks. An example is the need to compare streamflow prediction from the Hillslope Link Model (HLM) operated by the Iowa Flood Center (IFC) and the National Water Model (NWM) operated by the National Water Center of the National Oceanic and Atmospheric Administration. The HLM uses landscape decomposition into hillslopes and channel links while the NWM uses the NHDPlus dataset as its basic spatial support. While the HLM resolves the scale of the NHDPlus, the outlets of the latter do not necessarily correspond to the nodes of the HLM model. The authors evaluated two methods to map the outlets of NHDPlus to outlets on the IFC network. The methods compare the upstream areas of the channels and their spatial location. Both methods displayed similar performance and identified matches for about 80% of the outlets with a tolerance of 10% in errors in the upstream area. As the aggregation scale increases, the number of matches also increases. At the scale of 100 km², 90% of the outlets have matches with tolerance of 5%. The authors recommend this scale for comparing the HLM and NWM streamflow predictions.     

Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.     

高斯轨迹烟云扩散模型在贵阳空气质量预报中的应用

选择在复杂地区应用较好的高斯轨迹烟云扩散模型,作为贵阳市空气质量预报的数学扩散模式,并利用贵阳市现有的污染源排放资料和气象资料,对贵阳市的大气污染物分布进行了模拟计算,经与实测结果比较表明:实测值与监测值基本一致,相关性较好。该模式可以作为贵阳市空气质量预报的数学扩散模式,对其他城市也具有一定的借鉴作用。      

低流量河流的水量水质平衡研究

针对存在补给关系的河流或河段,提出更切合实际设计条件的水量平衡模型和水量水质平衡模型,进而确定了源与目标之间的响应关系参数和河流或河段的输移作用,在水量水质平衡模型基础上,给出推求自净环境容量的方法。该模型和方法已得到实际应用和检验,具有广泛的应用前景。      

抚顺市大气污染物对降水pH值的影响及预测分析

降水 pH值在一定程度上反映了降水和大气的污染状况。研究抚顺市大气污染物对降水 pH值的影响并预测了未来几年降水 pH值的变化趋势。结果表明 :抚顺市的降水酸度是由大气中的SO2 等酸性气体和碱性尘埃共同作用的结果 ,降水 pH值向酸性降水发展。     

EFFECTS OF CLIMATE CHANGE ON HYDROLOGY AND WATER RESOURCES IN THE COLUMBIA RIVER BASIN1

ABSTRACT: As part of the National Assessment of Climate Change, the implications of future climate predictions derived from four global climate models (GCMs) were used to evaluate possible future changes to Pacific Northwest climate, the surface water response of the Columbia River basin, and the ability of the Columbia River reservoir system to meet regional water resources objectives. Two representative GCM simulations from the Hadley Centre (HC) and Max Planck Institute (MPI) were selected from a group of GCM simulations made available via the National Assessment for climate change. From these simulations, quasi-stationary, decadal mean temperature and precipitation changes were used to perturb historical records of precipitation and temperature data to create inferred conditions for 2025, 2045, and 2095. These perturbed records, which represent future climate in the experiments, were used to drive a macro-scale hydrology model of the Columbia River at 1/8 degree resolution. The altered streamflows simulated for each scenario were, in turn, used to drive a reservoir model, from which the ability of the system to meet water resources objectives was determined relative to a simulated hydrologic base case (current climate). Although the two GCM simulations showed somewhat different seasonal patterns for temperature change, in general the simulations show reasonably consistent basin average increases in temperature of about 1.8–2.1°C for 2025, and about 2.3–2.9°C for 2045. The HC simulations predict an annual average temperature increase of about 4.5°C for 2095. Changes in basin averaged winter precipitation range from -1 percent to + 20 percent for the HC and MPI scenarios, and summer precipitation is also variously affected. These changes in climate result in significant increases in winter runoff volumes due to increased winter precipitation and warmer winter temperatures, with resulting reductions in snowpack. Average March 1 basin average snow water equivalents are 75 to 85 percent of the base case for 2025, and 55 to 65 percent of the base case by 2045. By 2045 the reduced snowpack and earlier snow melt, coupled with higher evapotranspiration in early summer, would lead to earlier spring peak flows and reduced runoff volumes from April-September ranging from about 75 percent to 90 percent of the base case. Annual runoff volumes range from 85 percent to 110 percent of the base case in the simulations for 2045. These changes in streamflow create increased competition for water during the spring, summer, and early fall between non-firm energy production, irrigation, instream flow, and recreation. Flood control effectiveness is moderately reduced for most of the scenarios examined, and desirable navigation conditions on the Snake are generally enhanced or unchanged. Current levels of winter-dominated firm energy production are only significantly impacted for the MPI 2045 simulations.     

完全均匀混合质量平衡水质模型在滇池中的应用

介绍了完全均匀混合假设下以质量平衡为基础的湖泊水质模型,运用滇池的实测数据对模型进行了参数率定、验证,给出了模型在滇池水质预测中的应用实测,最后讨论了模型的几个假设条件对滇池的适应性。实例研究表明,该模型可适用于滇池水质有机污染长期浓度预测。      

Risk assessment method of polyethylene dust explosion based on explosion parameters

The explosion characteristic parameters of polyethylene dust were systematically investigated. The variations in the maximum explosion pressure (P_max), explosion index (K_st), minimum ignition energy (MIE), minimum ignition temperature (MIT), and minimum explosion concentration (MEC) of dust samples with different particle sizes were obtained. Using experimental data, a two-dimensional matrix analysis method was applied to classify the dust explosion severity based on P_max and K_st. Then, a three-dimensional matrix was used to categorize the dust explosion sensitivity based on three factors: MIE, MIT, and MEC. Finally, a two-dimensional matrix model of dust explosion risk assessment was established considering the severity and sensitivity. The model was used to evaluate the explosion risk of polyethylene dust samples with different particle sizes. It was found that the risk level of dust explosion increased with decreasing particle size, which was consistent with the actual results. The risk assessment method can provide a scientific basis for dust explosion prevention in the production of polyethylene.