Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

单细胞凝胶电泳技术在环境污染物检测中的应用

主要介绍了单细胞凝胶电泳技术(SCGE),包括SCGE的原理、方法及其在环境污染物检测中的应用,该技术可用多种污染物的检测且灵敏度高,具有广阔的应用前景。即SCGE对大气污染物、重金属、醛类及辐射污染的检测,具有高度敏感性,是具有广阔应用前景的新技术。     

喷射浮选处理含油污水的研究

重点对喷射浮选处理含油污水进行了试验研究，结果表明浮选室内射流泵的没水深度对喷射选除油效果有较大的影响，并且只有在气泡量大并充满浮选室及表面相对平静的状态下，才儿得较好效果，为此，我们在浮选室内加入自制的增料，使兼并的气海重新得到分散，消耗了一部分动能，减缓了浮选室的扰动，使除在大提高，从而为研制新型高效的喷射浮选设备提供了一条新途径。     

Reduction of sera requirements in amniotic fluid cell culture

Reduction in serum requirement for culture of primary human amniotic fluid cells can be achieved by the addition of 10 growth-promoting factors to the nutrient medium. This supplemented medium preserves cell types normally found in amniotic fluid cell cultures supplemented with 20–30 per cent fetal bovine serum. The volume of amniotic fluid required to initiate culture can be as little as 1 ml. Amniotic fluid samples contaminated with red blood cells with no visible clot also grow well in the low serum medium. Cell-free amniotic fluid combined with equal parts of supplemented medium is useful in initiating cell culture.     

The effect of oxygen tension on colony formation and cell proliferation of amniotic fluid cellsin vitro

The effects of reduced oxygen concentrations in the gas phase over the culture medium on colony formation and cell proliferation were investigated in high and low cell density primary and secondary cultures of amniotic fluid cells. Using two standard culture methods (25 cm² plastic flasks and Leighton type tubes) a significantly reduced culture time was observed at high cell density for mass cultures by incubation within a low oxygen tension gas phase (2.5 per cent to 7.5 per cent O₂) instead of conventional air (18 per cent O₂). At low cell density colony formation was significantly enhanced in cultures grown at reduced oxygen tension. Using gas permeable membranes as support, lowering the oxygen tension from 7.5 per cent to 2.5 per cent yielded an increase in plating efficiency of cells from approximately 5 per cent to 25 per cent, whereas plating efficiency was less than 2 per cent for cells grown at ambient 18 per cent O₂. It is suggested that low oxygen tension in the gas phase is an effective means of enhancing clonal growth in amniotic fluid cell cultures, thereby reducing both culture time and risk of culture failure.     

固定化酵母菌对活性艳蓝KN-R的脱色研究

采用海藻酸钙加活性碳的方法对酵母菌进行固定化。正交试验结果表明，三者合适配比为海藻酸钠3％，活性碳10％，氯化钙4％。此方法制得的凝胶颗粒机械强度好、经久耐用。固定化酵母菌凝胶小球最适条件为：培养时间为48h，培养温度为37℃，培养基pH为3．0，凝胶量为10g。固定化细胞经多次脱色后能重复使用，4次脱色后其脱色率还达79．2％。     

Alteration in Rhizosphere Soil Properties of Afforested <Emphasis Type="Italic">Rhamnus lycioides</Emphasis> Seedlings in Short-Term Response to Mycorrhizal Inoculation with <Emphasis Type="Italic">Glomus intraradices</Emphasis> and Organic Amendment

The reestablisment of autochthonous plant species is an essential strategy for recovering degraded areas under semiarid conditions. A field experiment was carried out to assess the short-term effect of two reafforestation methods involving mycorrhizal inoculation and compost addition on soil quality parameters and Rhamnus lycioides seedling growth. The nutrient content (NPK) and enzymatic activities (dehydrogenase, urease, protease-BAA, acid phosphatase and β-glucosidase) increased and bulk density decreased in the rhizosphere soil with the organic amendment. Biomass C of rhizosphere soil increased by at least 240% with respect to the control soil after mycorrhizal inoculation and the combination of compost addition + mycorrhizal inoculation. Both mycorrhizal inoculation and composted organic residue addition increased R. lycioides seedling growth in the same proportion. In the short term, we conclude that the application of both reafforestation methods not only enhances the establishment of R. lycioides seedlings, but also improves soil quality.     

燃煤工业锅炉SO2污染防治技术的选择及评价--中国燃煤工业锅炉SO2污染综合防治对策(八)

论述了中国燃煤工业锅炉SO2污染防治技术的选择及评价，其中主要包括：《中国燃煤工业锅炉SO2污染综合防治对策》的产生、主要内容、特点、选择、评价及其实施的意义。     

生物质液化燃油代用燃料的应用及展望

主要介绍了生物质液化燃油代用燃料的概念、特点及优势,分析了其它几种代用燃料优势与不足,并阐明了生物质液化燃油代用燃料发展的必然趋势.     

A Parallel Study of SAR Levels in Head Tissues for Three Antennas Used in Cellular Telephones: Monopole, Helix and Patch

Summary This paper is a comparative study of several antennas commonly used in cellular telephones. These include a monopole, a helix-monopole and a patch antenna. Each one of these structures is modeled and numerically tested using finite-difference time-domain simulation and human models based on magnetic-resonance images, which allow for inclusion of details of the human body in the simulation. The testing procedure involves antenna simulation in the proximity of the human head. The behavior of each antenna is evaluated for variable distances from the head geometry (0, 1, 2, 4, 8 and 16 mm). Continuous waveform, representative of the sources used in mobile telephones, (250 mW, 1.8 GHz) is used as the form of the antenna excitation. The simulation outputs used as measures for this comparative study include transmitting and receiving antenna characteristics and the specific absorption rate (SAR). The SAR levels for the head tissues are calculated for and with accordance to the two currently accepted standards: Federal Communications Commission (FCC) and International Commission on Non-Ionizing Radiation Protection (ICNIRP). The computed SAR levels within each of the considered tissues vary for the three antennas under investigation and are within the determined health safety standards. Results suggest that the patch antenna may be the structure of choice when considering safety standards, as its radiation yields the lowest local SAR in the head tissues.