基于MGWR的黄河流域土壤有机碳密度和影响因素分析

土壤有机碳作为最大陆地碳库,其空间分布特征和影响因素对于全球碳循环过程具有重要影响.基于土壤有机碳密度数据,结合环境因子,使用多尺度地理加权回归（MGWR）模型预测了黄河流域土壤有机碳密度（SOCD）和影响因素.结果表明：①黄河流域0~20 cm和0~100 cm的SOCD范围分别为0~14.82 kg ·m^-2和0~32.39kg ·m^-2,均值分别为3.48 kg ·m^-2和8.07kg ·m^-2,储量则分别为2.76 Pg和6.48 Pg;②各生态系统类型中,0~20 cm的SOCD从大到小依次为：森林>水体与湿地>其他>草地>农田>聚落>荒漠,0~100 cm的SOCD从大到小依次为：水体与湿地>森林>其他>草地>农田>聚落>荒漠,SOCR从大到小皆为：草地>农田>森林>荒漠>水体与湿地>聚落>其他;③黄河流域SOCD的分布主要受常数项、剖面曲率、NDVI和降水的影响,曲率和粉砂对深层的SOCD的分布也具有重要影响;此外,降水、NDVI和常数项（除森林外）是影响各生态系统的主要因素,曲率和粉砂则仅对荒漠和其他生态系统具有重要影响.研究结果得出了黄河流域SOCD的空间分布和影响因素,可为黄河流域碳平衡、土壤质量评价和生态治理恢复与巩固提升提供科学依据.     

湟水河流域地表水体微塑料分布、风险及影响因素

为探究我国青藏高原淡水环境中微塑料的分布情况,采用金相显微镜观察、傅里叶红外光谱测定、野外调查和影像数据分析等方法对青海省湟水河流域丰水期63个地表水样中微塑料的分布特征和影响因素进行分析,并依据风险指数（H）和污染负荷（PLI）指数模型评估了微塑料的潜在生态风险.结果表明,流域水体中微塑料丰度范围为665~8780 n ·m^-3,湟源县水系平均丰度最高,达5414 n ·m^-3,各支流丰度从上游到下游逐渐增大.微塑料中薄膜类和颗粒类分别占36%和33%,透明和黑色分别占67%和17%,粒径在0.45~50 μm的占70%,聚乙烯（66%）和聚丙烯（12%）为主要的聚合物类型.微塑料丰度与耕地面积、降水量和紫外线强度正相关,与溶解氧、氧化还原电位和风速显著负相关,微塑料的分布受人类活动和环境因子的共同影响.总体上湟水河流域地表水体中微塑料的潜在生态风险较低.     

北江中上游地表水和沉积物中PAHs和PCBs污染特征和风险评估

采用气相色谱-质谱法（GC-MS）测定了北江中上游流域地表水和沉积物样品中多环芳烃（PAHs）和多氯联苯（PCBs）类污染物的含量,分析了PAHs和PCBs的污染水平和空间分布,并评估了污染物的健康风险和生态风险.结果表明,16种PAHs单体在所有水样和沉积物样品中均被检出,检出范围分别为41.82~443.04 ng·L^-1和59.58~635.73 ng·g^-1,北江中上游PAHs的污染水平为中、轻度.水中PAHs以二环芳烃和三环芳烃为主,沉积物中以三环芳烃和四环芳烃为主.在水样中检出了17种PCBs,浓度范围0.81~287.50 ng·L^-1,以六氯联苯和七氯联苯为主;沉积物中检出了8种PCBs,含量范围0.13~3.96 ng·g^-1,以五氯联苯和七氯联苯为主.整个调查区域内地表水中PAHs和PCBs的终生致癌风险指数小于10^-4,处于中、低水平;非致癌风险指数均小于1,不存在非致癌风险.采用风险商值（RQ）法对地表水中污染物进行生态风险评价,研究区域内地表水中PAHs和PCBs生态风险总体处于中低风险水平,个别点位存在重度风险的污染物单体,值得引起重视.采用沉积物质量基准法（SQGs）对沉积物中污染物进行生态风险评估,沉积物中PAHs和PCBs均处于较低的生态风险水平.     

塔里木河流域生态系统特征及其管理面临的问题分析

基于塔里木河流域生态系统特征,分析塔里木河流域生态系统管理面临的主要问题.①农业开发大量挤占生态用水,威胁流域生态系统安全;②流域农药使用量增长1.78倍,化肥使用量增长2.06倍,工业SO2排放量增长5.93倍,城镇污水量增长0.23倍,下游水质严重超标;③水资源利用效率仅为6.79元/m3,远低于新疆平均水平;④人口和种植规模年均增长11％以上,突破流域水资源承载力.从综合生态管理体制、生态资源市场交易机制、生态立法三方面提出塔里木河流域生态系统管理新方向.     

浅析珠三角地区有机废气治理技术的开发应用

珠江三角洲地区大气污染最明显的特点就是臭氧浓度的升高导致大气氧化性增强,而挥发性有机化合物(VOCs)和氮氧化物是大气臭氧生成的重要前体物。珠三角地区工业体系发达,VOCs的生产及使用企业众多,由于VOCs的种类繁多,性质各异,排放条件多样,目前已经形成了一系列的VOCs废气实用治理技术。     

Daily Bank Erosion Rates in the Lower Yellow River Before and After Dam Construction

During the period of water impoundment and sediment detention of the Sanmenxia Reservoir, riverbank erosion processes played a key role in the channel evolution of the Lower Yellow River (LYR). However, research into bank erosion rates of the LYR has been neglected due to the lack of direct field monitoring. In this study, an indirect method is proposed to determine bank erosion rates at daily time scales by outlining a detailed calculation procedure using measured hydrological data. A total of 810 data points of daily bank erosion rates before and after the construction of Sanmenxia Dam was calculated at seven hydrometric sections along the LYR, with the corresponding values of the bank stability coefficient and the width‐to‐depth ratio also being calculated. Empirical relations were then developed to estimate the daily bank erosion rates, using these parameters at the sections. Temporal and spatial variability in daily bank erosion rates in the LYR before and after dam construction were also investigated, revealing that: (1) the bank erosion rates had a mean value of 16.7‐29.1 m/day in the braided reach, with a maximum value of 290.0 m/day, while they were relatively low in the meandering reach, with a mean value of 2.5 m/day; (2) the erosion rates before dam construction were slightly greater than those after dam construction, with the difference reaching 5‐10 m/day in the braided reach, decreasing in the transitional reach gradually, and being slight in the meandering reach.     

System dynamics model for analyzing effects of eco-design policy on packaging waste management system

EU's long-term objective is to become a recycling and resource effective society, where waste is utilized as a resource and waste generation is prevented. A system dynamics model was developed to analyze the policy mechanisms that promote packaging material efficiency in products through increased recycling rates. The model includes economic incentives such as packaging and landfill taxes combined with market mechanisms, behavioral aspects and ecological considerations in terms of material efficiency (the packaging material per product unit, recycled fraction in products). The paper presents the results of application of various policy instruments for increasing packaging material efficiency and recovery rate and reducing landfilled fraction. The results show that a packaging tax is an effective policy instrument for increasing the material efficiency. It ensures the decrease of the total consumption of materials and subsequent waste generation. The tax helps to counteract a rebound effect, which, as identified by the analysis, can be caused by reduced material costs due to eco-design. The model is applied to the case of Latvia. Yet, the elements and structure of the model developed are similar to waste management systems in many countries. By changing numeric values of certain parameters, the model can be applied to analyze policy mechanisms in other countries.     

淮河流域新型城镇化水平的空间差异及其影响因素分析

以淮河流域31个地级市为研究对象,从人口、经济、生活和环境四个方面构建了新型城镇化水平的综合评价指标体系,利用熵值法对其综合城镇化水平及其子系统水平进行评价.结果表明,淮河流域地区新型城镇化发展水平存在较强的空间依赖性,即一个地区城镇化水平的提高通过空间溢出促进周边地区的城镇化发展,地区产业结构的变化是决定其新型城镇化水平的主要因素,尤其是第三产业发展对其影响极大.     

西安市灞河流域水环境现状分析及治理对策

基于大量的技术资料和监测数据,对西安市灞河流域的水环境进行了全面系统的分析,指出了面临的问题及其成因.在此基础上提出了灞河流域水环境治理的新思路、新方法,为流域的综合治理工作提供借鉴.     

城市煤气输配过程中的变频调速自动恒压控制系统

将河南平顶山煤气公司原煤气输配系统改造成为自动恒压控制系统,从而提高安全系数,降低煤气输配电耗。