A framework for assessing the impact of land use policy on community exposure to air toxics

Our research focuses on the linkage between land use planning policy and the spatial pattern of exposure to air toxics emissions. Our objective is to develop a modeling framework for assessment of the community health risk implications of land use policy. The modeling framework is not intended to be a regulatory tool for small-scale land use decisions, but a long-range planning tool to assess the community health risk implications of alternative land use scenarios at a regional or subregional scale. This paper describes the development and application of an air toxic source model for generating aggregate emission factors for industrial and commercial zoning districts as a function of permitted uses. To address the uncertainty of estimating air toxics emission rates for planned general land use or zoning districts, the source model uses an emissions probability mass function that weights each incremental permitted land use activity by the likelihood of occurrence. We thus reduce the uncertainty involved in planning for development with no prior knowledge of the specific industries that may locate within the land use district. These air toxics emission factors can then be used to estimate pollutant atmospheric mass flux from land use zoning districts, which can then be input to air dispersion and human health risk assessment models to simulate the spatial pattern of air toxics exposure risk. The model database was constructed using the California Air Toxics Inventory, 1997 US Economic Census, and land assessment records from several California counties. The database contains information on more than 200 air toxics at the 2-digit Standard Industrial Classification (SIC) level. We present a case study to illustrate application of the model. LUAIRTOX, the interactive spreadsheet model that applies our methodology to the California data, is available at http://www2.bren.ucsb.edu/~mwillis/LUAIRTOX.htm.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

Land-use forecasting and hydrologic model integration for improved land-use decision support

This paper develops a methodology for integrating a land-use forecasting model with an event scale, rainfall-runoff model in support of improving land-use policy formulation at the watershed scale. The models selected for integration are loosely coupled, structured upon a common GIS platform that facilitates data exchange. The hydrologic model HEC-HMS is calibrated for a specific storm event that occurred within central Washington State. The land-use forecasting model, What If? is implemented to forecast future spatial distributions of low-density residential land-uses under low and high population growth estimates. Forecasted land-use distribution patterns for the years 2015, 2025, and 2050 are then used as land-use data input for the calibrated hydrologic model, keeping all other parameters constant. Impacts to the stream discharge hydrograph are predicted as the study area becomes increasingly developed as forecasted by What If?. The initial results of this integration process demonstrate the synergy that can be generated through the linkage of the selected models. The ability to quantifiably forecast the potential hydrologic implications of proposed land-use policies before their implementation offers land-use decision-makers a valuable tool for discerning which proposed land-use alternatives will be effective at minimizing storm water runoff.     

Assessing the impact of leather industries on the quality of water discharged into the East China Sea from Wenzhou Watersheds

Ammonium nitrogen and total germanium are among the main pollutants in the wastewater discharged from the leather industry. The intake of high concentrations of ammonium nitrogen and/or total germanium harms human health and biological species, as is well documented in literature. This paper focuses on assessing the trends of ammonium nitrogen and total germanium concentrations through time in two watersheds (Aojiang and Oujiang) in the Wenzhou metropolitan area of Zhejiang Province and their relationships with the released wastewater using regression and correlation statistics. The paper also utilizes the integrated pollution index to evaluate water quality in the two watersheds. Preliminary results show that, from 1992 to 1998 in the Aojing watershed, the concentrations of ammonium nitrogen and total germanium increased 13 and 14 times, respectively, decreasing somewhat after 1998, while between 1992 and 1997 in the Oujiang watershed, the concentrations increased, then decreased after 1997. The concentrations of ammonium nitrogen and total germanium are positively related to the amount of released wastewater. The concentrations of ammonium nitrogen and total germanium exceeded water standards 12 and 3 times, respectively, in Pingyang county of the Aojiang watershed, 14 and 3.3 times in Lucheng District of the Oujiang watershed, and 14 and 3.8 times in the Ouhai Oujiang watershed, respectively. In Pingyang county of the Aojiang watershed, the water quality degraded from Type III in 1992 to over Type V in 2003, and in the Oujiang watershed, the water quality degraded from Type II to over Type IV in 1999, when they were compared with the water quality standards. The water quality slightly improved in 2003 for the Oujiang watershed. It appears that pollution did have a direct positive correlation with leather industry production in the Pingyang Aojing watershed, while there was a negative correlation between the two in the Oujiang watershed. In these two watersheds, the integrated pollution index did not appear to relate to population dynamics and agricultural production. This paper also discusses the current new methodologies and approaches adopted nationally and internationally to reduce the contaminants and purify the environment for maintaining a sustainable and healthier environment in Wenzhou.     

An integrated fuzzy-stochastic modeling approach for risk assessment of groundwater contamination

An integrated fuzzy-stochastic risk assessment (IFSRA) approach was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with site conditions, environmental guidelines, and health impact criteria. The contaminant concentrations in groundwater predicted from a numerical model were associated with probabilistic uncertainties due to the randomness in modeling input parameters, while the consequences of contaminant concentrations violating relevant environmental quality guidelines and health evaluation criteria were linked with fuzzy uncertainties. The contaminant of interest in this study was xylene. The environmental quality guideline was divided into three different strictness categories: "loose", "medium" and "strict". The environmental-guideline-based risk (ER) and health risk (HR) due to xylene ingestion were systematically examined to obtain the general risk levels through a fuzzy rule base. The ER and HR risk levels were divided into five categories of "low", "low-to-medium", "medium", "medium-to-high" and "high", respectively. The general risk levels included six categories ranging from "low" to "very high". The fuzzy membership functions of the related fuzzy events and the fuzzy rule base were established based on a questionnaire survey. Thus the IFSRA integrated fuzzy logic, expert involvement, and stochastic simulation within a general framework. The robustness of the modeling processes was enhanced through the effective reflection of the two types of uncertainties as compared with the conventional risk assessment approaches. The developed IFSRA was applied to a petroleum-contaminated groundwater system in western Canada. Three scenarios with different environmental quality guidelines were analyzed, and reasonable results were obtained. The risk assessment approach developed in this study offers a unique tool for systematically quantifying various uncertainties in contaminated site management, and it also provides more realistic support for remediation-related decisions.     

Maintenance of Forest Biodiversity in a Post-Soviet Governance Model: Perceptions by Local Actors in Lithuania

Successful biodiversity conservation does not depend on ecologic knowledge alone. Good conservation policies and policy implementation tools are equally important. Moreover, the knowledge, skills, and attitudes of local actors, directly in charge of operations in the field, are a key to successful policy implementation. The connections between policy objectives and their implementation as well as the involvement of local actors’ efforts in implementing policy objectives largely depend on the governance model in use. This article assesses the knowledge of local actors in relation to the biodiversity conservation objectives and tools in Lithuanian forest management. As a main framework for this study, the needs assessment approach was applied. The study used both in-depth open-ended interviews and follow-up telephone interviews. Two state forest enterprises in Lithuania were selected as the study sites. The findings indicate that policy objectives in the field of forest biodiversity conservation and the related tools are well known but not well understood by those in charge of forest biodiversity policy implementation. To improve the situation, a transition toward adaptive learning and participatory governance as a means of facilitating conservation efforts is proposed.     

Losing Function Through Wetland Mitigation in Central Pennsylvania,USA

In the United States, the Clean Water Act requires mitigation for wetlands that are negatively impacted by dredging and filling activities. During the mitigation process, there generally is little effort to assess function for mitigation sites and function is usually inferred based on vegetative cover and acreage. In our study, hydrogeomorphic (HGM) functional assessment models were used to compare predicted and potential levels of functional capacity in created and natural reference wetlands. HGM models assess potential function by measurement of a suite of structural variables and these modeled functions can then be compared to those in natural, reference wetlands. The created wetlands were built in a floodplain setting of a valley in central Pennsylvania to replace natural ridge-side slope wetlands. Functional assessment models indicated that the created sites differed significantly from natural wetlands that represented the impacted sites for seven of the ten functions assessed. This was expected because the created wetlands were located in a different geomorphic setting than the impacted sites, which would affect the type and degree of functions that occur. However, functional differences were still observed when the created sites were compared with a second set of reference wetlands that were located in a similar geomorphic setting (floodplain). Most of the differences observed in both comparisons were related to unnatural hydrologic regimes and to the characteristics of the surrounding landscape. As a result, the created wetlands are not fulfilling the criteria for successful wetland mitigation.     

Conceptual Models as Hypotheses in Monitoring Urban Landscapes

Many problems and challenges of ecosystem management currently are driven by the rapid pace and spatial extent of landscape change. Parks and reserves within areas of high human population density are especially challenged to meet the recreational needs of local populations and to preserve valued environmental resources. The complex problem of managing multiple objectives and multiple resources requires an enormous quantity of information, and conceptual models have been proposed as tools for organizing and interpreting this information. Academics generally prefer a bottom-up approach to model construction that emphasizes ecologic theory and process, whereas managers often use a top-down approach that takes advantage of existing information to address more pragmatic objectives. The authors propose a formal process for developing, applying, and testing conceptual models to be used in landscape monitoring that reconciles these seemingly opposing perspectives. The four-step process embraces the role of hypothesis testing in the development of models and evaluation of their utility. An example application of the process to a network of national parks in and around Washington, DC illustrates the ability of the approach to systematically identify monitoring data that would both advance ecologic theory and inform management decisions.     

Initial Screening of Contaminated Land: A Comparison of US and Swedish Methods

Preliminary surveys are used to prioritize between contaminated sites to select those to be investigated more thoroughly. The data-gathering steps are almost identical between countries; however, the assessment procedures differ significantly. In this study, we have investigated 21 contaminated sites assessed as belonging to the high-risk or the very high-risk class using the Swedish Methods for Inventories of Contaminated Sites (MICS). We then applied the US Preliminary Assessment (PA) method to the same sites and compared the results and conclusions from the two screening procedures. In both cases, all sites were recommended for further investigation and the two approaches seem to corroborate one another; however, the PA assessment scores and the preliminary MICS classifications did not correlate. The results obtained with the PA method were easier to explain than the final MICS classification. The PA method also seems more transparent and easier to standardize, although objections could be made regarding the weighting scheme, because the outcome in this study was entirely dependent on the surface exposure pathway. However, to examine this in greater detail, it is necessary to include sites with less contamination: The importance of preliminary surveys in the overall risk management process gives a strong motivation for such an evaluation. Generally, the lack of research and scientific support for the various assessment procedures in use suggests that there is a need for method development, standardization, and validation.     

天山北坡经济带土壤重金属来源及污染评价

为定量识别与评价天山北坡经济带中奇台、吉木萨尔、阜康等地区土壤重金属来源与生态风险,对该区域171个表层土壤中Zn、Cu、Cr、Pb、Hg、As和Cd7种常见重金属的含量进行测定.运用统计学方法、主成分分析、正定矩阵因子分解（PMF）与潜在生态风险指数进行重金属污染程度评价以及来源分析.结果表明,研究区土壤Zn、Cu与Cr之外,Pb、Hg、As和Cd分别超过了新疆土壤背景值4.1、2.0、8.0和48.0倍;与国家土壤重金属风险筛选值相比,Zn、Cr和Hg浓度在安全范围内,Cu与Pb有少部分样点污染较严重,超出筛选值,As与Cd平均值分别超出筛选值的3.09倍与19.17倍.污染来源分析结果显示研究区土壤中的重金属元素主要来自于燃煤源、交通运输、大气降尘、农工业排放和自然因素.生态风险评价结果分析表明,Zn、Cu、Cr和Pb处于轻微风险状态;Cd处于极高风险水平;73.68%的Hg处于中等风险,18.71%处于高风险;43.86%的As生态风险处于中等风险,51.46%处于高风险.综合潜在生态指数介于472~2575.69,Cd对综合潜在生态指数贡献率达到了89.24%,其次是As与Hg,表明研究区Cd对土壤生态环境危害很大,As与Hg也需要特别引起重视.