Mass balance of arsenic and antimony in municipal waste incinerators

The arsenic and antimony balance in two municipal waste incinerators was investigated. Initially, the production rates of ash and wet scrubber effluent were estimated. Then the arsenic and antimony in the ash and wet scrubber effluent were determined, which gave an estimate of the elemental balance. The total amounts of arsenic and antimony in the municipal waste were 0.9 g/t and 30–44 g/t, respectively. The distributions to fly ash were 45–47% and 33–74% for arsenic and antimony, respectively. The distribution mechanisms of arsenic and antimony are discussed from the viewpoints of their thermodynamics as well as their initial valencies, which greatly affect their behaviour. Received: July 2, 1998 / Accepted: February 27, 1999     

The composting potential of different organic solid wastes: experience from the island of Crete

For the past 20 years, the National Foundation for Agricultural Research in Crete and the School of Agricultural Technology of the Technological and Educational Institute of Crete have been involved in a number of research and development activities, related to the production and evaluation of compost derived from a variety of local solid, mainly agricultural organic wastes. Materials such as olive press cake, olive tree leaves (OTL) and branches, vine branches (VB), pressed grape skins (PGS), pig manure (PM), sewage sludge and the organic fraction of municipal solid waste (OFMSW) have been evaluated for their behaviour during composting, their compatibility in mixtures and the quality of the end product. The quality evaluation included both a detailed physiochemical (pH, electrical conductivity (EC), nutrients concentration, heavy metal concentration, etc.) and biological analyses (pathogenic microorganisms). It also included an agronomic evaluation, in which composts were used either as a soil amendment or as a component for substrates in open air or covered (greenhouse) cultivation mainly of local vegetables (tomatoes, cucumbers, etc.). All materials were composted successfully, especially when mixed. The end products contained large amounts of organic matter, usually combined with an increased EC value. Pressed grape skins should be considered as the ideal raw material, producing a high quality compost, with the lowest EC value (1.57 mS cm(-1)) and the largest organic matter concentration (84.50%), compared to all other materials. When any of the produced compost was used in a ratio of 30% by volume (v/v), it increased plant growth, whereas in larger volumes, it presented phytotoxic behaviour, inhibiting both root and shoot development.     

Assessing instruments for mixed household solid waste collection services in the Flemish region of Belgium

Instruments to reduce waste can be divided into three groups: first, pecuniary incentives; second, service level; finally, measurements stimulating prevention and waste reduction. Also specific characteristics of the community determine the amount of waste generated. We evaluate whether findings in literature on effectiveness of policy measures are valid for Belgium, specifically for the Flemish region. The policy mix instituted by the Flemish authorities in the ‘implementation plan household waste 2003–2007’ and implemented by local authorities, is assessed. Multiple regression analysis identifies those measurements having the greatest impact on household solid waste.We found an income elasticity of 0.326. Also the provided service level has a significant impact. Pecuniary incentives are effective instruments in reducing waste, with a price elasticity of −0.139. Furthermore, a higher percentage of direct costs, directly attributable to waste services, borne by households, reduces waste. A consequent implementation of the ‘polluter pays’ principle proves to be effective.     

Alternative treatments for the municipal solid waste and domestic sewage in Campinas,Brazil

The treatments of municipal solid waste (MSW) and the domestic sewage (DS) are critical issues of the current political and environment discussions. These concerns are due to the lack of dumping areas, the continuous increase of the population, and public health issues. The adequate treatment and management of MSW and DS can produce many benefits such as financial funds, heat and energy production, reduction of emissions and recuperation of water for reuse. Currently in Campinas MSW and DS are deposited in landfills or discharged into rivers and other sites. In the present study two scenarios are evaluated for the treatment of MSW and DS in Campinas: recycling with biological treatment and recycling with thermal treatment. The most suitable treatments for Campinas, based on the data from the present analysis and taking into consideration the local conditions, maximization of energy potential and environmental benefits, are incineration for the MSW and biological treatment for DS, both with energy recuperation. The main gains of this option are substantial environmental benefits, generated energy which can reach 18% of the total electrical energy consumed in Campinas while about 53% recuperation of the total amount of water treated for Campinas in 2010.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

Regionalization of Municipal Solid Waste Management in Japan: Balancing the Proximity Principle with Economic Efficiency

The proximity principle—disposing of waste close to its origin—has been a central value in municipal solid waste (MSW) management in Japan for the last 30 years and its widespread adoption has helped resolve numerous “Not in My Backyard” issues related to MSW management. However, MSW management costs have soared, in large part because of aggressive recycling efforts and because most MSW is incinerated in a country that has scarce landfill capacity. In addition, smaller, less sophisticated incinerators have been closed because of high dioxin emissions. Rising costs combined with the closure of smaller incinerators have shifted MSW management policy toward regionalization, which is the sharing of waste management facilities across municipalities. Despite the increased use of regionalized MSW facilities, the proximity principle remains the central value in Japanese MSW management. Municipal solid waste management has become increasingly regionalized in the United States, too, but different driving forces are at work in these two countries. The transition to regionalized MSW management in Japan results from strong governmental control at all levels, with the central government providing funds and policy direction and prefectures and municipalities being the primary implementing authorities. By contrast, market forces are a much stronger force with US MSW management, where local governments—with state government oversight—have primary responsibility for MSW management. We describe recent changes in Japan’s MSW programs. We examine the connections between MSW facility regionalization, on the one hand, and, on the other hand, the proximity principle, coordination among local governments, central government control, and financing mechanisms.     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

Exploring full cost accounting approach to evaluate cost of MSW services in India

Municipal solid waste (MSW) services of developing countries often suffer due to the lack of financial and operational autonomy, scientific approach, and adequate levels of resources. The solid waste management (SWM) practices of developed countries are benefited in cost and efficiency due to the participation of private players and sound financial management. However, developing economies depend on local municipalities to own and operate SWM services amidst structural and financial inefficiency. With the demands of augmenting efficient and cost-effective SWM services to the expanding population of cities and towns of newly industrialized nations on the rise, the municipalities in these countries are under pressure to adopt ways and means that can support efficient utilization of resources and improved decision-making capabilities. This research article reflects the current state of the MSW services in India and explores full cost accounting (FCA) framework in its ability to generate information on cost-related aspects and sustainable deployment of resources. Lastly, the extensibility of FCA is tested by integrating externalities of MSW services.     

Environmental assessment of two home composts with high and low gaseous emissions of the composting process

A Life Cycle Assessment (LCA) of two home composts with low and high gaseous emissions of the composting process is presented. The study focused on the gaseous emissions of the composting process. Gaseous emissions of methane, nitrous oxides, ammonia and volatic organic compounds of the composting process were experimentally measured in field real trials. The results showed that the differences in gaseous emissions between the two home composts were 4.5, 5.8 and 52 for methane, nitrous oxides and ammonia, respectively. Higher emissions of nitrous oxides and methane affected significantly the category of global warming potential, while higher emissions of ammonia affected mainly the categories of acidification potential, eutrophication potential and photochemical oxidation. The differences found in the compost emissions were attributable to the composting production management (quality and composition of waste stream, frequency mixing of waste, humidity and temperature monitoring, among others) as well as weather conditions (temperature and humidity).