雷达海杂波统计特性建模研究

介绍了海杂波统计特性建模的幅度特性、多普勒谱及空间相关这三个方面的研究状况,对各种建模的思路和模型效果进行了对比总结。对于幅度均值已有多个较为成熟的模型,但适用范围不同,结果差异也很大。幅度分布建模重点解决拖尾问题,复合建模是趋势。除平均谱外,开始研究短时多普勒谱。空间相关性建模主要建立空间相关长度与雷达及海洋参数间的联系,但是研究还不够全面。总的来看,已由单纯经验建模发展为力图在机理研究指导下有一定物理意义的建模。尽管海杂波建模效果愈来愈接近实际,但建模依然存在诸多问题。     

Quantitative analysis of microbial biomass yield in aerobic bioreactor

We have studied the integrated model of reaction rate equations with thermal energy balance in aerobic bioreactor for food waste decomposition and showed that the integrated model has the capability both of monitoring microbial activity in real time and of analyzing biodegradation kinetics and thermal-hydrodynamic properties. On the other hand, concerning microbial metabolism, it was known that balancing catabolic reactions with anabolic reactions in terms of energy and electron flow provides stoichiometric metabolic reactions and enables the estimation of microbial biomass yield (stoichiometric reaction model). We have studied a method for estimating real-time microbial biomass yield in the bioreactor during food waste decomposition by combining the integrated model with the stoichiometric reaction model. As a result, it was found that the time course of microbial biomass yield in the bioreactor during decomposition can be evaluated using the operational data of the bioreactor (weight of input food waste and bed temperature) by the combined model. The combined model can be applied to manage a food waste decomposition not only for controlling system operation to keep microbial activity stable, but also for producing value–added products such as compost on optimum condition.     

应用数值法对井工开采对地下水预测研究——以晋城矿区赵庄煤矿为例

为了预测井工煤矿开采后地下水水位变化,及对矿区内居民水源井的影响程度,文章在详细分析赵庄煤矿区域及井田水文地质条件的基础上,运用VisualMODFLOW软件对该煤矿及周边影响范围进行了地下水流数值模拟分析,预测了赵庄煤矿开采后不同阶段地下水水位、水量及影响范围的变化,并分析了煤矿开采对当地居民饮用水源的影响,模型的识别与检验表明,所建模型能够较好地反映水文地质条件,能够与目前实际开采地下水影响相吻合。     

城市居住区毒气扩散数值模拟

针对某居住区附近氯气储罐连续泄漏,通过求解三维不可压缩Navier-Stokes方程、K-ε湍流模型和物质浓度方程,模拟毒气在建筑物扰动条件下的扩散过程以及浓度时空分布特征,以毒气负载为基础给出近地面毒气危害区域,探讨毒气扩散对周边居民的影响。     

The predictive validity of safety climate

PROBLEM: Safety professionals have increasingly turned their attention to social science for insight into the causation of industrial accidents. One social construct, safety climate, has been examined by several researchers [Cooper, M. D., & Phillips, R. A. (2004). Exploratory analysis of the safety climate and safety behavior relationship. Journal of Safety Research, 35(5), 497-512; Gillen, M., Baltz, D., Gassel, M., Kirsch, L., & Vacarro, D. (2002). Perceived safety climate, job Demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research, 33(1), 33-51; Neal, A., & Griffin, M. A. (2002). Safety climate and safety behaviour. Australian Journal of Management, 27, 66-76; Zohar, D. (2000). A group-level model of safety climate: Testing the effect of group climate on microaccidents in manufacturing jobs. Journal of Applied Psychology, 85(4), 587-596; Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628] who have documented its importance as a factor explaining the variation of safety-related outcomes (e.g., behavior, accidents). Researchers have developed instruments for measuring safety climate and have established some degree of psychometric reliability and validity. The problem, however, is that predictive validity has not been firmly established, which reduces the credibility of safety climate as a meaningful social construct. The research described in this article addresses this problem and provides additional support for safety climate as a viable construct and as a predictive indicator of safety-related outcomes. METHODS: This study used 292 employees at three locations of a heavy manufacturing organization to complete the 16 item Zohar Safety Climate Questionnaire (ZSCQ) [Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628]. In addition, safety behavior and accident experience data were collected for 5 months following the survey and were statistically analyzed (structural equation modeling, confirmatory factor analysis, exploratory factor analysis, etc.) to identify correlations, associations, internal consistency, and factorial structures. RESULTS: Results revealed that the ZSCQ: (a) was psychometrically reliable and valid, (b) served as an effective predictor of safety-related outcomes (behavior and accident experience), and (c) could be trimmed to an 11 item survey with little loss of explanatory power. IMPACT ON INDUSTRY: Practitioners and researchers can use the ZSCQ with reasonable certainty of the questionnaire's reliability and validity. This provides a solid foundation for the development of meaningful organizational interventions and/or continued research into social factors affecting industrial accident experience.     

基于BP神经网络的煤层自燃预测

在全面分析影响煤层自燃因素的基础上,建立了煤层自燃预测的人工神经网络模型.应用该模型对某煤田的多个煤层样本进行了训练和预测,网络经过10次训练后,误差达到设定的最小值,6次预测测试中最大误差仅为0.027 8,最小的为0.000 1.研究表明,该模型精度较高,可用于预测煤层自燃的实际应用.     

含信号控制人行横道的街道峡谷污染物扩散三维数值模拟

耦合微观交通仿真和机动车尾气排放模型,分别对含信号控制人行横道和不含信号控制人行横道的街道峡谷污染物排放进行计算,并以此为排放源,采用k-ε两方程模型与组分输运方程对风向与街道垂直时的污染扩散情况进行了三维数值模拟.结果表明,k-ε两方程模型与组分输运方程可以较好地模拟风向与街道垂直时三维街道峡谷内的污染物扩散情况.峡...     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

基于CALPUFF模型的漳州市大气环境容量研究

研究表明：CALPUFF模式是运用于广域的大气扩散模型,在区域范围较大的复杂地形条件下的应用具有突出的优势.利用CALPUFF大气扩散模型模拟漳州市2009年气象场和污染物浓度场,采用监测值对模拟结果进行验证表明模型的适用性;基于现状污染源,建立大气污染物传递系数矩阵,结合线性优化法测算了不同环境空气质量标准下漳州市大气环境容量.