底泥中营养物质及其他污染物释放机理综述

水体底泥(沉积物)污染,是世界范围内的一个重要环境问题.其污染物主要通过大气沉降、废水排放、水土流失、雨水淋溶与冲刷进入水体,最后沉积到底泥中并逐渐富集,使底泥受到严重污染.总结了底泥中氨氮、重金属的影响因素及释放机理,也指明了持久性有机污染物释放机理研究不足的现状,提出对其释放机理研究的重要性.     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

粗枝云杉不同径级根系分解过程中4种养分元素的释放特征

植物根系分解是养分元素进入土壤的重要途径之一.为了解径级对根系分解过程中养分元素释放的潜在影响,以川西亚高山针叶林中的粗枝云杉(Picea asperata)为对象,采用原位分解试验,研究云杉3个径级(0-2 mm,2-5 mm和5-10 mm)根系分解过程中钾(K)、钠(Na)、钙(Ca)和镁(Mg)元素的浓度、残留...     

Oxidative degradation of phenol by sulfidated zero valent iron under aerobic conditions: The effect of oxalate and tripolyphosphate ligands

After adding either organic or inorganic ligands, sulfidated nano-zero-valent iron (SnZVI) was used for aerobic degradation of phenol, and the effect of the ligand species on oxidation performance was investigated. We found that SnZVI hardly degraded phenol in the absence of ligand addition. Ligands initiated and promoted the degradation of pollutants by SnZVI. The data herein show that a characteristic inorganic ligand, tripolyphosphate (TPP), is more effective in enhancing oxidation than a characteristic organic ligand oxalate. In addition to the scavenging of reactive oxidants by the organic ligand, more ferrous ion (Fe(II)) dissolution from SnZVI in the TPP system is another cause for the superior enhancement by the inorganic ligand. In the oxalate system, as the sulfur content of SnZVI increased, the oxidation efficiency increased because FeS shell promoted the transfer of electrons to produce more reactive oxygen species (ROS). In TPP system, the effect of sulfur content on oxidation performance is more complex. The SnZVI with low sulfur content showed poor oxidation performance compared with that of nZVI. Further experiments proved that sulfidation might weaken the complexation of TPP with surface bound Fe, which would slow down the ionic Fe(II) dissolution rate. Therefore, sulfidation has the dual effects of enhancing electron transfer and inhibiting the complexation of inorganic ligands. In addition, the mechanisms of ROS generation in different ligand systems were investigated herein. Results showed that the critical ROS in both the oxalate and TPP systems are hydroxyl radicals, and that they are produced via one-electron activation of O₂.     

某市给水管网中铁释放现象影响因素与控制对策分析

针对某市管网水中铁浓度的变化规律进行了系统的研究,确定了管垢向管网水中释放出的铁是管网水中铁超标的主要原因.研究中发现铸铁管和镀锌钢管中管垢的主要化学组分为铁.在给水管网中,管网水的溶解氧和余氯浓度低时,对应的管网水中铁释放现象严重,其原因是还原条件使管垢表面的致密钝化层被破坏,造成二价铁的大量释放.根据试验结果提出了给水管网中铁释放和“红水”现象的控制对策.     

水源更换对给水管网水质的影响研究

为了研究水源更换对给水管网水质的影响,对北方A市水源更换过程中管网水质理化指标进行了监测分析.通过33 h的监测发现,由于水源水质不同造成管网水质化学不稳定,管网水水质部分指标发生了明显的下降,pH从7.54降到7.18,碱度从188　mg·L^-1降到117 　mg·L^-1,氯化物从310 　mg·L^-1降到132 　mg·L^-1（以Cl^-计）,电导率从0.176　S·m^-1降到0.087 　S·m^-1,钙离子和镁离子略有下降分别为15 　mg·L^-1和11 　mg·L^-1,这些都是由于滦河水质与黄河水质不同造成的;余氯在换水过程中发生了较复杂的变化,主要是由于水源更换造成耗氯量增加以及夜间用水量少造成管网水输配时间长引起的;pH、碱度、余氯的变化使得管网水中铁的含量增加,最高达到0.4 　mg·L^-1,超出饮用水标准规定的0.3 　mg·L^-1.通过分析水源更换过程中水质的变化,提出了控制管网水质稳定的方法主要有提高pH、增加碱度、投加缓蚀剂和严格保证出厂水及管网水水质指标特别是余氯等.     

湖泊沉积物中磷化氢的释放动力学初探

采用柱状芯样模拟法,研究了太湖沉积物-水界面磷化氢的释放动力学.结果表明:当沉积物-水界面磷化氢的释放达到动态平衡时,水界面中磷化氢的浓度基本不再增大,大约在0.34 pg·l-1左右,此时磷化氢的释放通量约为0.008 pg·dm-2·h-1.根据室内模拟结果,太湖沉积物每年的磷化氢释放量在13.81-49.62 g之间,从而使磷化氢在湖水中的平均浓度达到0.16 pmol·l-1.     

潮间带沉积物/大气Hg的释放的模拟研究

研究了潮间带沉积物中的Hg向大气的释放,结果表明光照造成沉积物中的Hg快速向大气释放.光照8 h后,海泊河口和黄河口沉积物释放到大气中的Hg分别占58%和51%,其释放通量总体上遵循先升高后降低的规律,前者在13:00～14:00达到最大值2 830μg/(m2·h),后者在12:00～13:00达到最大值73μg/(m2·h);海泊河口沉积物Hg的释放通量与大气温度、沉积物温度和光照强度的相关系数分别为0.83(P＜0.05)、0.98(P＜0.01)和0.73(P＜0.05),黄河口沉积物Hg的释放通量与大气温度、沉积物温度和光照强度的相关系数分别为0.73(P＜0.05)、0.80(P＜0.05)和0.81(P＜0.01),温度、光照对沉积物Hg的释放有重要的影响.     

城市工业COD总量优化分配研究

总量控制是控制污染源发展趋势、改善环境质量、实现经济社会可持续发展的重要途径,如何在适度公平的基础上寻求环境、经济、技术、资源等整体最优是环境科学领域的研究课题。本文以工业城市苏州市为例,研究其工业化学需氧量的排放特征,以基尼系数法分行业对其工业化学需氧量排放量的公平性进行评价,并将总量控制与资源、社会和经济相联系,以行业经济效益最大化和增加治理投资费用最小化为目标,利用多目标行业总量优化分配模型对苏州市的工业化学需氧量排放总量进行优化分配。研究结果表明,纺织业、化学原料及化学制品制造业、能源和水的生产与供应业、造纸及木材加工、医药制造业等行业是苏州市的化学需氧量重点排放行业,经优化分配后,COD排放总量削减了10%,新鲜用水量减少了41.81%,行业年总产值增幅达到214.69%,资源和水环境容量在满足一定的经济增长速度的条件下实现优化配置,总量控制制度在市场经济体制下发挥出尽可能大的环境效益和经济效益。