A review of biochars' potential role in the remediation, revegetation and restoration of contaminated soils

Biochars are biological residues combusted under low oxygen conditions, resulting in a porous, low density carbon rich material. Their large surface areas and cation exchange capacities, determined to a large extent by source materials and pyrolysis temperatures, enables enhanced sorption of both organic and inorganic contaminants to their surfaces, reducing pollutant mobility when amending contaminated soils. Liming effects or release of carbon into soil solution may increase arsenic mobility, whilst low capital but enhanced retention of plant nutrients can restrict revegetation on degraded soils amended only with biochars; the combination of composts, manures and other amendments with biochars could be their most effective deployment to soils requiring stabilisation by revegetation. Specific mechanisms of contaminant-biochar retention and release over time and the environmental impact of biochar amendments on soil organisms remain somewhat unclear but must be investigated to ensure that the management of environmental pollution coincides with ecological sustainability.     

Sediment-associated aliphatic and aromatic hydrocarbons in coastal British Columbia, Canada: concentrations, composition, and associated risks to protected sea otters

Sediment-associated hydrocarbons can pose a risk to wildlife that rely on benthic marine food webs. We measured hydrocarbons in sediments from the habitat of protected sea otters in coastal British Columbia, Canada. Alkane concentrations were dominated by higher odd-chain n-alkanes at all sites, indicating terrestrial plant inputs. While remote sites were dominated by petrogenic polycyclic aromatic hydrocarbons (PAHs), small harbour sites within sea otter habitat and sites from an urban reference area reflected weathered petroleum and biomass and fossil fuel combustion. The partitioning of hydrocarbons between sediments and adjacent food webs provides an important exposure route for sea otters, as they consume ∼25% of their body weight per day in benthic invertebrates. Thus, exceedences of PAH sediment quality guidelines designed to protect aquatic biota at 20% of the sites in sea otter habitat suggest that sea otters are vulnerable to hydrocarbon contamination even in the absence of catastrophic oil spills.     

An experimental set up of a PAH vapour generator and its use to test an annular denuder

The aim of this work is to develop and test a dynamic gas generator for semi-volatile organic compounds (SVOC). A single compound, naphthalene, is used as a surrogate PAH to test the system. The dynamic generation of PAH is based on the permeation technique [Analyst 106 (1981) 817; Am. Ind. Hyg. Assoc. J. 38 (1977) 712]. Monitoring the temperature and measuring the mass of PAH present in the permeation chamber every 48 h gives a direct measurement of the sublimation rate of the PAH. Knowing the flow rate, gives an accurate value of the concentration of PAH from the generator. It was found stable over a period of time under constant operating conditions. This concentration is diluted down to between 0.3 and 30 ppbv by a controlled flow of pure air. The diluting airflow is a mixture of dry and wet air, making it possible to control the relative humidity of the flow from the generator as well as its concentration in PAH. We used this generator to calibrate an annular denuder tube, based on the study by Gundel et al. [Atmos. Environ. 29 (1995) 1719]. Although this technique has been shown to be artefact-free for sampling gaseous PAH [Polycyclic Aromatic Compounds 9 (1996) 67; Atmos. Environ. 28 (1994) 3083], its trapping efficiency still depends on environmental parameters (temperature, relative humidity and sampling duration). Accordingly, we used our generator to calibrate a single annular denuder under controlled conditions (T degrees C, HR%, CPAH, sampling duration). The trapping efficiency of the denuder was calculated by two independent methods. Firstly, by comparing the amount trapped on a denuder with the measured mass sublimated in the generator. Secondly, by putting two denuders in series and comparing the mass collected on the first and the second tube. These two methods gave similar results, within the 10% relative uncertainties of both methods. The first results obtained show that, in environmental conditions, the efficiency ranges between 90 and 100%.     

Prediction of complete bioremediation periods for PAH soil pollutants in different physical states by mechanistic models

Mass-transfer models and biodegradation models were developed for three theoretical physical states of polycyclic aromatic hydrocarbons (PAHs) in soil. These mechanistic models were used to calculate the treatment periods necessary for complete removal of the PAH pollutants from the soil under batch conditions. Results indicate that the bioremediation of PAHs in such systems is mainly mass-transfer limited. The potential for bioremediation as a treatment technique for PAH contaminated soils is therefore mainly determined by the mass-transfer dynamics of PAHs. Under mass-transfer limited conditions simplified mathematical models, based on the assumption of a zero dissolved PAH concentrations, can be used to predict the period of time needed for complete bioremediation.     

Natural attenuation/phytoremediation in the vadose zone of a former industrial sludge basin

The natural attenuation of polyaromatic hydrocarbons (PAHs) in the vadose zone of a naturally revegetated former industrial sludge basin (0.45 ha) was examined. This was accomplished by comparing the concentration of 16 PAH contaminants present in sludge collected below the root zone of plants with contaminants present at 3 shallower depths within the root zone. Chemical analysis of 240 samples from 60 cores showed the average concentration of total and individual PAHs in the 0-30 cm, 30-60 cm, and bottom of the root zone strata were approximately 10, 20, and 50%, respectively, of the 16, 800 ppm average total PAH concentration in deep non-rooted sludge. Statistically significant differences in average PAH concentrations were observed between each strata studied and the non-rooted sludge except for the concentrations of acenaphthene and chrysene present at the bottom of the root zone in comparison to sludge values. The rooting depth of the vegetation growing in the basin was dependent on both vegetation type and plant age. Average rooting depths for trees, forbs (herbaceous non-grasses), and grasses were 90, 60, and 50 cm, respectively. The deepest root systems observed (100-120 cm) were associated with the oldest (12-14 year-old) mulberry trees. Examination of root systems and PAH concentrations at numerous locations and depths within the basin indicated that plant roots and their microbially active rhizospheres fostered PAH disappearance; including water insoluble, low volatility compounds, i.e. benzo(a)pyrene and benzo(ghi)perylene. The reduced concentration of PAHs in the upper strata of this revegetated former sludge basin indicated that natural attenuation had occurred. This observation supports the concept that through appropriate planting and management practices (phytoremediation) it will be possible to accelerate, maximize, and sustain natural processes, whereby even the most recalcitrant PAH contaminants (i.e. benzo(a)pyrene) can be remediated over time.     

The effect of oils on PAH, PCDD, PCDF, and PCB emissions from a spark engine fueled with leaded gasoline

The effect of synthetic and mineral oils on the formation of polyaromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) in emissions from a spark ignition engine was studied on a Skoda Favorit engine fueled with leaded gasoline. The test cycle simulated urban traffic conditions on a chassis dynamometer, in accordance with the ECC 83.00 test. The data for selected PAHs as well as PCDDs, PCDFs, and PCBs congener profiles are presented. PCDD/Fs emissions for an unused oil and the oil after 10000-km operation varied from 300 to 2000 fmol/m3, PCBs emissions from 75 to 178 pmol/m3, and PAHs emissions from 150 to 420 microg/m3. The content of PCBs in oils varied from 2 to 920 mg/kg.     

Analysis of particle-associated semi-volatile aromatic and aliphatic hydrocarbons in urban particulate matter on a daily basis

PM_2.5 Particle-associated semi-volatile organic compounds (SVOC) were determined in the city of Augsburg, Germany. Daily samples were collected at a central monitoring station from late summer to late autumn 2002. The concentrations of polycyclic aromatic hydrocarbons (PAH), oxidized PAH (O-PAH), n-alkanes, hopanes and long chain linear alkylbenzenes were determined by direct thermal desorption-gas chromatography-time of flight mass spectrometry (DTD-GC-TOFMS). Additionally, PM_2.5 particle mass and number concentrations were measured. The sampling campaign can be divided into two parts, distinguished by a lower temperature level in the second part of the campaign. The particulate mass concentration showed no significant changes, whereas most of the SVOC had significant higher mean and peak concentrations in the colder period. The analysis of the data showed an increased influence of non-traffic sources in the colder period, reflected by a weak shift in the PAH profile and a significant shift in the hopane pattern. Statistical analysis of the inter-group correlations was carried out. Eight clusters partly representing different sources of the aerosol have been identified.     

Effects of lipids on the sorption of hydrophobic organic compounds on geosorbents: a case study using phenanthrene

The impact of the lipid fraction of natural geosorbents on the sorption of a polycyclic aromatic hydrocarbon was assessed using several experiments. In the first set of experiments phenanthrene was sorbed on a coastal sediment as well as on its humin and humic acid fractions before and after lipid extraction. Before lipid extraction, sorption shows dominantly partitioning characteristics. However, the extraction of lipids from sediment and humin drastically increases, by up to one order of magnitude, their sorption affinity for phenanthrene at low sorbate concentrations, resulting in increased isotherm nonlinearity. This effect is less pronounced for humic acids. One mechanism proposed for the increasing sorption is that lipids, despite their very low relative abundance in the sediments, can compete with phenanthrene for specific high affinity sorption sites (e.g., matrix pores and adsorption sites). This competition is not surprising considering the similar hydrophobic nature of lipids and phenanthrene. Lipids, or any non-polar molecules, could also act like plasticizers by swelling rigid domains and disrupting high affinity sites. In both cases, the removal of lipids (and extraction solvents) makes those sites available for phenanthrene. These provide alternative explanations to the previously proposed “solvent conditioning effect” believed to occur when geosorbents are treated with non-polar solvents modifying the matrix structure, an effect yet to be proven at molecular scale. To further investigate the impact of lipids on sorption, other independent experiments were performed. In a second experiment, re-addition of lipids to the extracted sediment restored the sorption isotherm linearity observed in the native material supporting the absence of irreversible extraction artifacts. However, high addition of lipids (i.e., after saturation of high affinity sites) seems to also enlarge the low affinity partitioning domain. These results are consistent with dual-mode, hole-filling, sorption models involving diffusion. In the final set of experiments, solid-state ¹⁹F-NMR using F-labeled lipids sorbed onto the sediments confirmed that lipids may be in different domains (mobile or rigid) that interact or not with phenanthrene. The possible effects of lipid removal on sorption have been overlooked and should be considered when geosorbents are pretreated.     

Observations of N2O5 and NO3 at a suburban environment in Yangtze river delta in China: Estimating heterogeneous N2O5 uptake coefficients

The nitrate radical (NO₃) and dinitrogen pentoxide (N₂O₅) play an important role in the nocturnal atmosphere chemistry. Observations of NO₃ radicals and N₂O₅ were performed in a semirural ground site at Tai'Zhou in polluted southern China using cavity ring down spectroscopy (CRDS) from 23 May to 15 June 2018. The observed NO₃ and N₂O₅ concentrations were relatively low, with 1 min average value of 4.4 ± 2.2 and 26.0 ± 35.7 pptV, respectively. The N₂O₅ uptake coefficient was determined to be from 0.027 to 0.107 based on steady state lifetime method. Fast N₂O₅ hydrolysis was the largest contributor to the loss of NO₃ and contributed to substantial nitrate formation, with an average value of 14.83 ± 6.01 µg/m³. Further analysis shows that the N₂O₅ heterogeneous reactions dominated the nocturnal NO_x loss and the nocturnal NO_x loss rate is 0.14 ± 0.02 over this region.     

聚酰肼接枝改性活性炭除甲醛材料的制备及其影响因素

为解决甲醛污染问题,开展了多胺高分子接枝活性炭环境材料制备研究.采用质量比为1:1的硫酸和硝酸的混合液对活性炭表面改性,再以DCC（N,N-二环己基碳二亚胺）为胺化反应的缩水剂,通过PAH（聚酰肼）和活性炭缩聚反应制备了除甲醛材料ACm-g-PAH（聚酰肼接枝改性活性炭）,通过单因素试验探讨了影响ACm-g-PAH除甲醛的因素,再由正交试验得出ACm-g-PAH制备的最佳工艺为活化温度为90℃,w（DCC）为2.0%,c（PAH）为12 mmol/L.结果表明:在温度为10~50℃与相对湿度为45%~85%区间内,温度和相对湿度对甲醛去除率影响并不明显.吸附甲醛的ACm-g-PAH经弱酸还原再生技术处理后,再生5次的ACm-g-PAH对甲醛的去除率仍能达到初生材料的89.2%.FTIR（红外光谱）证明了在DCC存在下,聚酰肼高分子PAH与ACm（改性活性炭）表面羧基缩聚反应的事实.随着c（PAH）的增加,SEM（扫描电镜）显示活性炭孔内的PAH呈堆积的现象;TG（热重分析）图谱的测试结果表明,ACm-g-PAH的降解温度在330~420℃之间.研究显示,ACm-g-PAH对甲醛的去除率最高为99.4%.