Modelling the fate of hydrophobic organic contaminants in a boreal forest catchment: A cross disciplinary approach to assessing diffuse pollution to surface waters

The fate of hydrophobic organic compounds (HOCs) in soils and waters in a northern boreal catchment was explored through the development of a chemical fate model in a well-characterised catchment system dominated by two land types: forest and mire. Input was based solely on atmospheric deposition, dominated by accumulation in the winter snowpack. Release from soils was governed by the HOC concentration in soil, the soil organic carbon fraction and soil-water DOC content. The modelled export of selected HOCs in surface waters ranged between 11 and 250 ng day⁻¹ during the snow covered period, compared to 200 and 9600 ng/d during snow-melt; highlighting the importance of the snow pack as a source of these chemicals. The predicted levels of HOCs in surface water were in reasonable agreement to a limited set of measured values, although the model tended to over predict concentrations of HOCs for the forested sub-catchment, by over an order of magnitude in the case of hexachlorobenzene and PCB 180. This possibly reflects both the heterogeneity of the forest soils and the complicated and changing hydrology experienced between the different seasons.     

Dioxins, PCBs, and HCB in soil and peat profiles from a pristine boreal catchment

The aim of this study was to explore how atmospherically derived soil pollution is affected by environmental processes at two typical boreal catchment landscape type settings: wetlands and forested areas. Measurements of hydrophobic organic compounds (HOCs) in forest soil and peat from an oligotrophic mire at various depths were performed at a remote boreal catchment in northern Sweden. HOCs in peat were evenly distributed throughout the body of the mire while levels of HOCs in the forest soil increased with increased amount of organic matter. Evaluation of HOC composition by principal component analysis (PCA) showed distinct differences between surface soils and deeper soil and peat samples. This was attributed to vertical transport, degradation and/or shifting sources over time. The calculated net vertical transport differed between surface layers (0.3%) and deeper soils (8.0%), suggesting that vertical transport conditions and processes differ in the deeper layers compared to the surface layers.     

PCB accumulation and tissue distribution in cave salamander (Proteus anguinus anguinus, Amphibia, Urodela) in the polluted karstic hinterland of the Krupa River, Slovenia

For over two decades, a manufacturer of electrical capacitors disposed of its waste within the karstic hinterland of the Krupa River (Slovenia) resulting in the surroundings becomming heavily polluted with PCB. Albeit the extent of the contamination has been known since 1983 and the Krupa River has become one of the most PCB polluted river in Europe, the effects on the cave fauna of the region remain unknown. The most famous cave dweller of the Krupa hinterland is the endemic cave salamander Proteus anguinus anguinus. In this study we determine the levels of PCB in the tissues of the Proteus and in river sediments. The total concentration of PCB in individual tissue samples from specimens of the Krupa spring was between 165.59 μg g⁻¹ and 1560.20 μg g⁻¹ dry wt, which is at least 28-times higher than those from an unpolluted site. The kidneys contained the lowest concentration, while the highest concentration was in subcutaneous fat and tissues with high lipid contents like visceral fat and liver. Total PCB concentrations in sediment samples from the Krupa River were between 5.47 and 59.20 μg g⁻¹ dry wt showing that a high burden of PCB still remains in the region. The most abundant PCB congeners in all analyzed samples were di-ortho substituted (PCB #101, #118, #138 and #158), but higher proportion of mono-ortho PCB was present in sediments. The ability of Proteus to survive a high PCB loading in its environment and especially in its tissues is remarkable. Its partial elimination of low chlorinated and mono-ortho substituted congeners is also reported.     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

Synthesis of hydroxylated PCB metabolites with the Suzuki-coupling

An improved synthesis of hydroxylated polychlorinated biphenyls (PCBs) which are structurally related to the major hydroxy PCB congeners identified in human plasma is described. The coupling of (chlorinated) aryl boronic acids with bromochloro anisoles using the standard conditions of the Suzuki coupling gave the desired hydroxylated PCB metabolites in good to excellent yields. The approach offers the advantage of high selectivity and good yields compared to conventional methods such as the Cadogan reaction and allows the use of less toxic starting materials.     

血压监护系统的电路分析和印刷电路板设计

本文介绍了血压监护系统的电路设计,其中前端电路的设计采用差分多级放大电路,达到放大的效果。应用PSpice软件对滤波电路进行了仿真,得到了带通滤波器的通带频率,验证了滤波器设计的可行性。同时本文对血压监护系统印刷电路板中电磁兼容问题进行了研究,对血压监护系统电路板的布局布线规则进行了规划和设计。     

中频熔炼炉测温仪电磁兼容设计与研究

中频熔炼炉测温仪工作在较强电磁场的环境中,对其电磁兼容设计是十分必要的。首先介绍了测温仪的抗干扰总体设计原理,给出了产生电磁干扰因素,提出了测温仪的各种抗电磁干扰措施,如屏蔽技术、接地与滤波技术等。实践表明,以上的各种措施提高了中频熔炼炉测温仪的电磁兼容性能。     

以印刷电路板废粉末料制取碱式碳酸铜的研究

印刷电路板废粉末料的资源化和无害化问题日益得到重视。以报废印刷电路板经机械粉碎和分选后的非金属粉(铜含量1%～5%)为原料,采用"氨浸—脱氨—干燥"的工艺制备碱式碳酸铜,设计了实验装置,考察了氨浸分离工艺条件,通过实验验证了其可靠性:铜的回收率达到98.8%以上,获得了纯度不小于98.0%的碱式碳酸铜,采用X射线粉末衍射(XRD)﹑扫描电镜(SEM)和能谱(EDS)方法对产品进行了分析和表征。     

应用高频气力分选机分选电子废料碎片的研究

进行了实验室高频气力分选机分选3～0.3 mm印刷电(线)路板模拟物料的研究.结果表明,在振频为1 621次/min,上升风量为120 m3/h,95 m3/h,60 m3/h,床面横向倾角6.64°,纵向倾角为1.07°时,金属回收率达93.95%;重产物金属品位为89.19%;轻产物中非金属的品位达99.33%.0.5～0.3 mm细粒物料的分选效果也是令人满意的.     

环境样品中非邻位取代共平面多氯联苯的测定

本文对测定实际环境样品中痕量非邻位取代共平面多氯联苯的方法进行了研究。样品萃取，净化后，经活性碳性层析分离，利用ＧＣ－ＥＣＤ毛细管柱双柱定性，外标法进行定量，测定了土壤和鱼肌肉中μｇ·ｋｇ＾－１数量级的３，３‘，４，４’－四氯联苯及ｎｇ·ｇｋｇ＾－１数量级的３，３‘，４’，５－五氯联苯。