Microbial transformation and degradation of polychlorinated biphenyls

This paper reviews the potential of microorganisms to transform polychlorinated biphenyls (PCBs). In anaerobic environments, higher chlorinated biphenyls can undergo reductive dehalogenation. Meta- and para-chlorines in PCB congeners are more susceptible to dechlorination than ortho-chlorines. Anaerobes catalyzing PCB dechlorination have not been isolated in pure culture but there is strong evidence from enrichment cultures that some Dehalococcoides spp. and other microorganisms within the Chloroflexi phylum can grow by linking the oxidation of H(2) to the reductive dechlorination of PCBs. Lower chlorinated biphenyls can be co-metabolized aerobically. Some aerobes can also grow by utilizing PCB congeners containing only one or two chlorines as sole carbon/energy source. An example is the growth of Burkholderia cepacia by transformation of 4-chlorobiphenyl to chlorobenzoates. The latter compounds are susceptible to aerobic mineralization. Higher chlorinated biphenyls therefore are potentially fully biodegradable in a sequence of reductive dechlorination followed by aerobic mineralization of the lower chlorinated products.     

超临界CO2回收线路板工艺研究

采用正交试验设计进行了超临界CO₂回收废弃印刷线路板的实验。以温度、压强、时间和夹带剂为实验因素,通过对实验前后样本在重量、厚度、弯曲强度和断裂强度四方面变化的分析考察了各实验因素对实验效果的影响。实验结果表明,影响超临界CO₂法回收印刷线路板的最主要因素为温度、时间和夹带剂,超临界CO₂法回收废弃印刷线路板的最佳工艺条件：温度270℃,压强大于7.38 MPa,时间3 h,夹带剂(水)160 mL。实验进一步验证了压强对实验结果的非显著性影响。     

Characterization of polychlorinated biphenyls and brominated flame retardants in surface soils from Surabaya, Indonesia

In this study, soil contamination by PCBs, PBDEs, HBCDs and two novel BFRs such as 1,2-bis-(2,4,6-tribromopenoxy) ethane (BTBPE) and decabromodiphenyl ethane (DBDPE) in various locations such as industrial, urban, rural, dumping site and agricultural areas of Surabaya, Indonesia has been characterized in order to evaluate their contamination status, profiles, potential sources, fate and behavior. Range and median concentrations of PCBs, PBDEs, HBCDs, BTBPE and DBDPE were ND - 9.6 (1.2), 0.069 - 24 (7.4), ND - 1.8 (0.48), ND - 1.7 (0.14) and ND - 7.6 (2.2) ng g⁻¹ dw, respectively. Industrial, urban and dumping areas were inventoried as the main sources of these pollutants. Decreasing gradient levels were observed for these contaminants from industrial district, urban, dumping site, rural and agricultural areas, in that order. Furthermore, organic carbon contents and proximity to the point sources were found as the major controlling factors. Contaminant profiles were characterized by the predominance of hexa-, hepta- and penta-homologues for PCBs; deca-, nona- and octa- for PBDEs and α-isomer for HBCDs. Product mixtures such as Ar1260/KC600 and Ar1254/KC500 for PCBs, deca- and octa-BDEs for PBDEs were the possible common formulations used in study area. To our knowledge, this is a first comprehensive study on characterization of soil contamination by PCBs, PBDEs and HBCDs together with two novel BFRs in a highly industrialized city located in tropical region. This study provides baseline information for establishing national monitoring programs in Indonesia.     

基于热带海洋大气环境下机载PCB板的环境适应性对比研究

目的 通过机载PCB板(Printed Circuit Board,PCB)在热带海洋大气环境下的腐蚀老化特征和电气性能退化规律分析,研究其在热带海洋大气环境下的环境适应性。方法 根据热带海洋大气环境中PCB板的实际使用环境大多为舱室内部封闭或半封闭的情况,分别设计并开展海南万宁海洋平台棚下暴露场和某海域环境户外简易遮蔽玻璃框下3 a的自然环境试验。结果 PCB板的焊点、焊盘、印制导线以及引线头等部位在2种试验环境中均出现了不同程度的腐蚀破坏,试验后期,所有部位的腐蚀程度全部达到了4级,导通电阻从几十毫欧增大至几十兆欧,绝缘电阻从10 GΩ以上降低至几兆欧。结论 在万宁站试验2 a和某海域试验3 a后,PCB板均不满足耐电压的技术要求(500 V交流电压60 s),万宁海洋平台棚下暴露场对PCB板的环境适应性更为严酷。     

云桌面终端电源端传导骚扰和辐射骚扰整改案例

某云桌面终端在进行中国强制性认证(CCC)时,电磁兼容试验项目电源端传导骚扰、辐射骚扰测试均出现超标现象。将重点从PCB板级电路EMC设计方面剖析其测试不合格原因,并给出相应的整改措施,最后对此案例进行总结,给出类似电子产品在PCB设计时的注意事项,以期能给PCB设计工程师提供一些参考意见。     

表面活性剂溶液中多氯联苯溶解的特性

对表面活性剂溶液中多氯联苯的溶解特性进行了研究.发现非离子型表面活性剂对多氯联苯增溶效果优于阴离子型表面活性剂;在浓度大于临界胶束浓度(CMC)范畴,不但表面活性剂的增溶效果远较其浓度低于CMC时为佳,而且表面活性剂浓度与多氯联苯的溶解度成正比地线性相关,此结果说明,表面活性剂主要通过形成胶束来增加多氯联苯的溶解度.多氯联苯在非离子型表面活性剂胶束溶液中与在正己烷中的紫外-可见光谱相似,进一步说明胶束内的多氯联苯分子主要分布于类似正己烷的疏水胶核区域.在十二烷基醇聚氧乙烯(10)醚溶液中,所试多氯联苯的辛醇-水分配系数(K_ow)与其胶束-水分配系数(K_m)存在很好的线性相关关系.     

AF+BAF深度处理PCB生产废水的试验研究

针对PCB废水难降解及含重金属铜的特点,在经过一系列的物化处理的基础上,采用AF+BAF组合工艺对其进行深度处理。试验研究中,通过控制污水在反应器中的停留时间,使得废水在AF中水解酸化,以增加废水的可生化性,在此基础上利用BAF的生物膜来去除污水中剩余的有机物。试验结果表明,试验系统对PCB废水中的COD、Cu2+去除效果良好,出水COD、Cu2+的含量分别稳定在10~50mg/L和0.02~0.1mg/L,达到排放标准。     

福建近岸表层海水中阴离子表面活性剂和PCB的污染

用亚甲蓝分光光度法和GC-ECD法分别对福建近岸表层海水中的阴离子表面活性剂和PCBs进行了分析,初步探讨了表层海水中这两类污染物的来源.表层海水中阴离子表面活性剂浓度范围为0.04～1.987 mg/L,较高浓度值站点主要位于九龙江口、闽江口和湄洲湾海域.PCBs的浓度在3.9～367.1 ng/L之间,整体上近岸站点浓度值比离岸站点高,中北部浓度值比南部高.与其他地区的研究结果及海水水质标准进行比较,福建沿海表层海水中阴离子表面活性剂和PCB的污染都较为严重.     

印刷线路板的超临界流体分离实验

目前印刷线路板(Printed Circuit Board, PCB)的资源化循环利用方法存在材料回收率低和环境污染的不足,采用一种新的超临界流体技术对PCB中的金属及其它成分进行分离处理,在采用丙酮、CO2及Lewis-酸的混合介质及优化的温度和压力反应条件下,获得了90%的金属回收率,高于目前的机械破碎分选实验结果.该方法为线路板的资源化循环再利用提供了一个新的有效选择.     

多氯联苯的气相色谱/质谱/质谱(GC/MS/MS)法测定

采用气相色谱/质谱/质谱(GC/MS/MS)法测定多氯联苯(PCB),具有良好的灵敏度和选择性,在地表水样品检测时,样品只须进行简单的液液萃取-浓缩,不须任何净化过程即可上机分析,方法检出限低于ng/L级。