河南省人类活动净磷输入的时空变化与影响参数

为探究河南省人类活动净磷输入状况,基于河南省18个省辖市(县辖市)行政单元统计数据,利用人类活动净磷输入量(NAPI)模型,核算河南省1990、1995、2000、2005、2010、2015和2019年人类活动净磷输入量.结果表明:在时间尺度上,1990～2015年河南省NAPI整体呈升高趋势,2015～2019年略...     

兰-白城市群主要大气污染物网格化排放清单及来源贡献

甘肃兰-白城市群为我国西北地区重要的重工业基地,大气污染物排放总量较大.研究高空间分辨率的污染物排放清单对于区域空气质量预报预警、减排方案模拟研究及大气污染防治等具有重要的科学意义.本文以兰州和白银为主要研究区域,基于研究区域污染源排放及统计年鉴等数据资料,建立了兰（2015年）-白（2016年）城市群7种（类）主要大气污染物网格化排放清单,并对其空间排放特征以及排放源贡献进行了详尽地讨论分析.结果表明,兰-白城市群7种主要污染物年排放量分别为：NO_x 2.22×10⁵ t、NH₃ 4.53×10⁴ t、VOCs 7.74×10⁴ t、CO 5.62×10⁵ t、PM₁₀ 4.95×10⁵ t、PM_2.5 1.91×10⁵ t和SO₂ 1.37×10⁵ t.其中CO的排放量最大,NH₃的排放量最小.本清单与北大和清华MEIC清单对比结果表明,交通源排放3个清单一致性较高,CO排放总量和其工业源排放与北大和清华MEIC清单排放源相差30%~40%,推测原因主要为清单计算过程中排放因子、分辨率和数据年份的差异.本清单网格化空间分布显示除NH₃外的其他6种（类）污染物,排放主要集中在市区,排放源中工业非燃烧过程源均为最大贡献占比,NH₃的主要贡献源是氮肥的施用及禽畜排放,其污染分布受耕地分布等因素影响较大.因此,减少工业非燃烧过程源、整合优质高效电力供应、使用清洁能源、严格控制工地扬尘、工业粉尘和做好城区绿化等,能有效地降低兰-白城市群NO_x、VOCs、CO、PM₁₀、PM_2.5和SO₂这6种（类）主要污染物的排放.NH₃的减排则主要可从控制氮肥的使用及减少禽畜排放两方面考虑.本研究还利用蒙特卡洛法分析了排放清单的不确定性,NH₃的不确定性最大为-31%~30%,CO的不确定性最小为-18%~16%,清单整体可信度较高.     

可控震源振动器系统不确定性分析

为了解决可控震源施工过程中振动器系统的安全性问题,采用故障树法建立仿真 模型。通过失效分析得出各故障单元的失效模式及单元间分布规律,计算出振动器系统 的可靠度。开展对该系统敏感性的不确定性分析,得出影响振动器系统可靠性的关键因 素为重锤上部密封失效。采用有限元法对其应力场进行模拟仿真。结果表明:随着工作 频率的升高,O形圈应力波动越大,密封越容易失效。Von Mises应力随压缩率的增大先 减小后增大,随槽口半径的增大而增大;接触应力在一定范围内随压缩率及槽口半径的 增大而增大。为振动器的结构优化与可靠性设计提供理论依据,并为油气资源勘探开发 的安全作业提供工程应用指导。     

相对两面受火的方钢管钢筋混凝土柱耐火极限

目前有关方钢管钢筋混凝土柱抗火性能的研究主要是针对四面均匀受火的情况,而在实际中,会出现相对两面受火这一情况。为此,利用ABAQUS分析软件建立了方钢管钢筋混凝土柱在相对两面受火作用下高温反应有限元模型,在验证模型正确性的基础上,对其耐火极限进行参数分析,包括荷载比、截面边长、长细比、荷载偏心率、钢材和混凝土强度及配筋率等,得到了相对两面火灾作用下方钢管钢筋混凝土柱耐火极限的主要影响参数和影响规律,并给出了该受火条件下方钢管钢筋混凝土柱耐火极限的简化计算方法。研究结果表明:荷载比、截面边长、长细比是相对两面火灾作用下方钢管钢筋混凝土柱耐火极限的主要影响参数,表现为截面边长越大,荷载比和长细比越小,构件的耐火极限越大。     

产品碳足迹评价中不确定度与敏感度相结合的数据质量分析

产品碳足迹评价中,数据种类、来源、获取途径和量化方法的选择不同将直接影响到评价结果的可靠与否.本文建立了结合敏感度和DQI-Monte Carlo不确定度分析的产品碳足迹评价数据质量分析模型.首先通过敏感度分析识别出产品碳足迹评价中的主要数据,再采用DQI-Monte Carlo不确定度分析方法对主要数据进行数据质量判定,甄选出影响评价结果可靠性的关键数据,并由此有针对性地提出数据质量改进意见,从而有效地优化数据收集方案,减少碳足迹评价结果的不确定度.建立的方法应用于我国某塑料软包装印刷企业的印刷前阶段碳足迹评价中.     

Fuzzy optimization of multi-period carbon capture and storage systems with parametric uncertainties

Carbon capture and storage (CCS) is an important technology option for reducing industrial greenhouse gas emissions. In practice, CO₂ sources are easy to characterize, while the estimation of relevant properties of storage sites, such as capacity and injection rate limit (i.e., injectivity), is subject to considerable uncertainty. Such uncertainties need to be accounted for in planning CCS deployment on a large scale for effective use of available storage sites. In particular, the uncertainty introduces technical risks that may result from overestimating the limits of given storage sites. In this work, a fuzzy mixed integer linear program (FMILP) is developed for multi-period CCS systems, accounting for the technical risk arising from uncertainties in estimates of sink parameters, while still attaining satisfactory CO₂ emissions reduction. In the model, sources are assumed to have precisely known CO₂ flow rates and operating lives, while geological sinks are characterized with imprecise fuzzy capacity and injectivity data. Three case studies are then presented to illustrate the model. Results of these examples illustrate the tradeoff inherent in planning CCS systems under parametric uncertainty.     

优化、RSA和GLUE方法在非线性环境模型参数识别中的比较

参数识别是数学模型应用的前提,本文对非线性环境模型常用的3种参数识别方法进行了比较分析.优化方法是出现最早、应用最广泛的参数识别方法之一.但在观测误差存在的情况下,采用优化方法识别的最优参数进行模型预测,存在很大的决策风险.考虑到这种不足,RSA方法和GLUE方法摒弃了识别单一最优参数的传统思维,而把识别参数扩大到多点组成的参数集.RSA方法与GLUE方法不同的是,RSA方法把可行的参数点看成是同等接受的,而GLUE方法则根据模拟值与实测值的差别,确定其似然度,代表参数的可信度水平.除参数识别以外,RSA方法和GLUE方法也是全局灵敏度分析的重要工具.     

Estimating the uncertainty of pesticide residue analysis from mango using multi-residue analysis and validation of method

Validation of method was performed for various pesticides on mango matrix involving the processing of sample at ambient and cryogenic conditions. The linearity, limits of detection, repeatability, matrix effect, and recovery were studied as the aspects of method validation. The effect of matrix on recovery was found to be medium (20–50%) and strong (>50%). After correction by matrix-matched calibration curves, the recovery was calculated to be in the range of 80–107% and 80–105% at ambient and cryogenic processing, respectively. The precision estimated for the recovery of pesticides obtained from both solvent- and matrix-matched calibration curves and at both the processing conditions was determined to be >20% except for chlorpyrifos and atrazine. The uncertainty established for the methodology was >20%, which substantiates the efficiency and reliability of methodology used for pesticide residue analysis in mango in this study.     

Uncertainty analysis of a pharmacokinetic modeling for inorganic arsenic

This paper presents an uncertainty and sensitivity analysis of a pharmacokinetic modeling of inorganic arsenic deposition in rodents for a short‐term exposure. Efforts to develop the pharmacokinetic model are directed towards predicting the kinetic behavior of inorganic arsenic in the body, including tissue and blood concentrations, and especially, the urinary excretion of arsenic and its methylated metabolites. However, the use of the model raises an important question when fixed values of model parameters are used: how is the uncertainty in the model prediction based on the collective uncertainties in the model inputs? This study focuses on an “epistemic”; uncertainty in order to handle this problem. In this case, the uncertainty refers to an input that has a single value which cannot be known with precision due to a lack of knowledge about items or its measurement. The combination of the pharmacokinetic model and the uncertainty analysis would help understand the uncertainties in risk assessment associated with inorganic arsenic.     

太原市多环芳烃(PAHs)排放清单与分布特征分析

根据太原市11种主要排放源的排放因子和活动量数据,估算了美国国家环境保护局(US EPA)优先控制污染物清单中16种多环芳烃(PAHs)的年排放量.结果表明2010年太原市16种PAHs的排放量约为332.10t,其中7种致癌性PAHs排放总量为35.11t.从排放源看,生活燃煤和炼焦煤是太原市排放PAHs的主要来源,占总排放量的65%以上.从各地区的PAHs排放情况看,排放量最大的地区是清徐县(87t/a),占总排放的27%.其次为古交市(54t/a)、晋源区(44t/a)、尖草坪区(40t/a).各地区人均收入与单位GDP排放量之间呈负相关 (R2=0.727);各地区PAHs排放量与农村人口之间呈正相关(R2=0.813),从排放谱看,排放以低环PAHs为主(81%),致癌性PAHs占总排放量的10.6%.结果表明,太原市PAHs的排放与太原市特殊的能源结构和人群结构有关.