多功能富氧净水器在养殖领域的研究与应用

多功能富氧净水器的研究,采用聚丙烯微孔滤膜、复合活性炭纤维、酸性洗涤纤维及复合炭粒作为过滤吸附材料,并采用三碘树脂杀菌剂和载银活性炭复合杀菌剂进行灭菌,应用"综合过滤渗透法"的机理,将净化、矿化、灭菌、增氧等有机结合并进行反复的研究和试验,有效去除了水中微生物、污染物,降低化学需氧量和水的硬度,达到净化水质,增加水中溶解氧等预期效果,成功的应用在水产养殖等领域。     

Dechlorination of disinfection by-product monochloroacetic acid in drinking water by nanoscale palladized iron bimetallic particle

Nanoscale palladized iron(Pd/Fe)bimetallic particles were prepared by reductive deposition method.The particles were characterized by X-ray diffraction(XRD),X-ray fluorescence(XRF),scanning electron microscope(SEM),transmission electron microscope(TEM),and Brunauer-Emmett-Teller-nitrogen(BET-N_2)method.Data obtained from those methods indicated that nanoscale Pd/Fe bimetallic particles containedα-Fe~0.Detected Pd to Fe ratio by weight(Pd/Fe ratio)was close to theoretical value. Spherical granules with di...     

Assessment of bisphenol A released from reusable plastic, aluminium and stainless steel water bottles

Bisphenol A (BPA) is a ubiquitous high volume industrial chemical that is an estrogen and an environmental endocrine disrupting chemical. Bisphenol A is used extensively in the production of consumer goods, polycarbonate plastics, epoxy resins and coatings used to line metallic food and beverage cans. There is great concern regarding the possible harmful effects from exposures that result from BPA leaching into foods and beverages from packaging or storage containers. The objective of this study was to independently assess whether BPA contamination of water was occurring from different types of reusable drinking bottles marketed as alternatives to BPA-containing polycarbonate plastics. Using a sensitive and quantitative BPA-specific competitive enzyme-linked immunosorbent assay we evaluated whether BPA migrated into water stored in polycarbonate or copolyester plastic bottles, and different lined or unlined metallic reusable water bottles. At room temperature the concentration of BPA migrating from polycarbonate bottles ranged from 0.2 to 0.3 mg L⁻¹. Under identical conditions BPA migration from aluminium bottles lined with epoxy-based resins was variable depending on manufacturer ranging from 0.08 to 1.9 mg L⁻¹. Boiling water significantly increased migration of BPA from the epoxy lined bottles. No detectable BPA contamination was observed in water stored in bottles made from Tritan™ copolyester plastic, uncoated stainless steel, or aluminium lined with EcoCare™. The results from this study demonstrate that when used according to manufacturers’ recommendations reusable water bottles constructed from “BPA-free” alternative materials are suitable for consumption of beverages free of BPA contamination.     

Effects of a chelating resin on metal bioavailability and toxicity to estuarine invertebrates: Divergent results of field and laboratory tests

Benthic invertebrates can uptake metals through diffusion of free ion solutes, or ingestion of sediment-bound forms. This study investigated the efficacy of the metal chelating resin SIR 300™ in adsorbing porewater metals and isolating pathways of metal exposure. A field experiment (Botany Bay, Sydney, Australia) and a laboratory toxicity test each manipulated the availability of porewater metals within contaminated and uncontaminated sediments. It was predicted that within contaminated sediments, the resin would adsorb porewater metals and reduce toxicity to invertebrates, but in uncontaminated sediments, the resin would not significantly affect these variables. Whereas in the laboratory, the resin produced the predicted results, in the field the resin increased porewater metal concentrations of contaminated sediments for at least 34 days and decreased abundances of four macroinvertebrate groups, and richness in all sediments. These contrasting findings highlight the limits of extrapolating the results of laboratory experiments to the field environment.     

两性高分子螯合絮凝剂和氯化钙对羟基亚乙基二膦酸预镀铜废水的去除性能

以羟基亚乙基二膦酸(HEDP)预镀铜废水为处理对象,考察两性高分子螯合絮凝剂(ACPF)和CaCl2对其处理效果.结果表明,单独使用ACPF或CaCl2,用量大,残余Cu2+和COD浓度均不能达到电镀污染物排放标准(GB21900—2008);将ACPF和CaCl2配合使用,Ca2+可与HEDP螯合生成HEDP—Ca沉淀,促进ACPF与Cu2+螯合;且Ca2+还可与废水中的酒石酸根离子形成溶解度很小的结晶,促进絮体的形成和沉降.因此,处理药剂的用量明显降低,Cu2+和COD残余浓度均能达标.适宜的处理条件为:弱碱或碱性条件下,ACPF投加量为3.0 g.L-1,CaCl2投加量为2.0 g.L-1,Cu2+和COD的去除率分别达99.74%和97.5%,残余浓度分别为0.335和25.27 mg.L-1.     

螯合剂对小麦幼苗吸收金属以及土壤金属形态的效应

本文通过盆栽试验研究三种螯合剂(EDTA、[S,S]-EDDS、DTPA)对小麦幼苗吸收土壤中重金属及其它微量元素的效应,并且通过改进的BCR连续提取法分析了种植后土壤样品中金属元素的形态。结果表明:EDTA、DTPA的添加导致小麦幼苗地上部分生物量以及叶片叶绿素a含量显著下降。螯合剂的存在明显增加了Pb和Mn在幼苗根部和茎叶的富集,并增加其由根部向茎叶的传输,但对Fe和Ni的作用比较小。小麦幼苗收获时,除Zn之外,其它元素酸溶/可交换态金属含量与对照组相比均有非常显著的增加,而各元素的可还原态由于EDTA等螯合剂的添加而有明显下降。添加螯合剂的情况下,富集量与酸溶/可交换态含量之间的相关系数大大提高,且各处理组茎叶富集量与酸溶/可交换态之间呈显著(P0.05)或极显著相关(P0.01)。因此,三种螯合剂的添加主要影响的是生物可利用形态以及潜在的生物可利用形态,并且可能导致可还原态以及可氧化态向酸溶/可交换态转变,增加金属的生物可利用性,从而也增加潜在生态风险。     

短胶化、冲击好耐候粉末涂料用聚酯树脂的研究

介绍了偏苯三甲酸酐、三羟甲基丙烷等单体的用量对耐候聚酯树脂粉末涂料胶化时间的影响及l，6-己二醇、2-甲基-l，3-丙二醇等单体对提高耐候聚酯树脂粉末涂层低温抗冲击性能的作用。     

Quaternized agricultural by-products as anion exchange resins

The objectives of this study were the chemical modification of readily available, low-cost agricultural by-products to anion exchange resins and the selection of the best modified by-product for further use in anion removal. Resins were prepared through the quaternization of a series of 12 agricultural by-products with N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHMAC). Phosphate ion adsorption assays were conducted at pH 7 in order to compare adsorption properties among the by-products. Quaternized corn stover showed the highest phosphorus adsorption at 0.66 mmole/g. Since corn stover exhibited the best uptake of phosphate ion, it was compared to a commercially available, cellulose-based anion exchange resin. Additionally, adsorption capacities of quaternized corn stover for arsenate, chromate, and selenate were evaluated and adsorption efficiencies were determined in simulated wastewater samples. Our results indicate that modified corn stover demonstrates good adsorption uptake for arsenate and selenate and especially for chromate.     

恶臭假单胞菌原位还原Pd(0) NPs对微生物电子传递性能及活性的影响

微生物原位合成零价金属纳米颗粒在材料合成和环境应用领域引起了广泛关注和研究.本研究利用Pseudomonas putida(P.putida)合成Pd(0)纳米颗粒(NPs),通过FESEM、TEM、XPS等对合成的纳米颗粒进行形貌、价态表征,并对其电化学性能及微生物抑制作用进行分析.结果表明,在厌氧条件下,P.putida在胞外及细胞周质空间可原位合成粒径约10 nm的Pd(0)NPs.CV实验表明,相比P.putida,含Pd(0)NPs的P.putida有更高的氧化还原电流;随着初始反应Pd(Ⅱ)浓度增加至0.07和0.1 mmol·L~(-1),恒电位实验中的乳酸氧化电流分别升至(10.6±5.2)和(22.5±9.7)nA,分别为P.putida((5.7±2.8)nA)的1.85和3.95倍;TTC-ETS和INT-ETS分别提升至89.02和209.09μg·mg~(-1)·h~(-1),分别是P.putida的1.64和1.34倍.以上结果证明了Pd(0)NPs对微生物胞外电子传递(Extracellular Electron Transfer,EET)的正面影响.抑菌圈实验和激光共聚焦图像表明,低量Pd(0)NPs具有较好的生物相容性,过多Pd(Ⅱ)和Pd(0)NPs对微生物有一定的毒性.     

Using thermal analysis with kinetic calculation method to assess the thermal stability of azo compound on construction materials

The application of construction polymers in engineering and alternative materials has always occupied a place in the market. In the production process of polymer resins, initiators can be used to lower the polymerization reaction energy threshold, which can improve reaction efficiency and reduce energy loss. However, as a commonly used energetic substance in the polymerization process, azos have caused related process hazards due to their exothermic characteristics. Because of this, it is essential to examine and analyze the thermal hazard characteristics of emerging azo substances, such as 2-cyanopropan-2-imemicarbazide (CABN). Although previous literature performs the calculation on related thermal hazard parameters of CABN, there is still exists a void for discussion in estimating the reaction model to avoid analogous hazards and enhance the existing thermal analysis. Based on the past literature, the reaction model is improved with thermogravimetric analysis as evidence. The revised thermal hazard parameters are calculated as the basis of control and mitigation measures, the kinetic model is used to estimate the modified safety parameters, and in the judgment of the runaway reaction, the critical temperature of the runaway is found by analyzing the influence of slight changes in ambient temperature on the reaction temperature. The results show that the critical temperature that causes CABN to enter the runaway reaction is delayed, and the hazard is lower than in the storage situation. Therefore, the thermal hazard to CABN mainly focuses on the safety environment and measures during storage.