Biogeochemical model (BGC-ES) and its basin-level application for evaluating ecosystem services under forest management practices

It is important for humans to live in harmony with ecosystems. Evaluation of ecosystem services (ES) may be helpful in achieving this objective. In Japan, forest ecosystems need to be re-evaluated to prevent their degradation due to lack of forest management.In order to evaluate the effects of forest management on forest ES, we developed a process-based biogeochemical model to estimate water, carbon, and nitrogen cycles in forest ecosystems (BGC-ES). This model consists of four submodels: biomass, water cycle, carbon-nitrogen (CN) cycles, and forest management. The biomass submodel can calculate growth of forest biomass under forest managements.Several parameters of the model were calibrated using data from observations of evapotranspiration flux and quality of stream flow in forests. The model results were compared with observations of runoff water from a dam catchment site and with carbon flux observations.Our model was coupled with a basin-level GIS database of forests. Evaluations under various forest management scenarios were carried out for forests in a basin contained in the Ise Bay basin (Chubu region, Japan), where plantations (artificial forests) seemed to have degraded from poor forest management.Comparing our simulation results with those of forests without management in the basin, we found that the amounts of absorbed carbon and runoff were larger in managed forests. In addition, the volume of harvested timber was larger and its quality (diameter) was better in managed forests. Changes of ES within the various scenarios were estimated for their economic value and were compared with the cost of forest management.     

Will progress in science and technology avert or accelerate global collapse? A critical analysis and policy recommendations

Industrial society will move towards collapse if its total environmental impact (I), expressed either in terms of energy and materials use or in terms of pollution, increases with time, i.e., dI/dt > 0. The traditional interpretation of the I = PAT equation reflects the optimistic belief that technological innovation, particularly improvements in eco-efficiency, will significantly reduce the technology (T) factor, and thereby result in a corresponding decline in impact (I). Unfortunately, this interpretation of the I = PAT equation ignores the effects of technological change on the other two factors: population (P) and per capita affluence (A). A more heuristic formulation of this equation is I = P(T)·A(T)·T in which the dependence of P and A on T is apparent. From historical evidence, it is clear that technological revolutions (tool-making, agricultural, and industrial) have been the primary driving forces behind successive population explosions, and that modern communication and transportation technologies have been employed to transform a large proportion of the world’s inhabitants into consumers of material- and energy-intensive products and services. In addition, factor analysis from neoclassical growth theory and the rebound effect provide evidence that science and technology have played a key role in contributing to rising living standards. While technological change has thus contributed to significant increases in both P and A, it has at the same time brought about considerable eco-efficiency improvements. Unfortunately, reductions in the T-factor have generally not been sufficiently rapid to compensate for the simultaneous increases in both P and A. As a result, total impact, in terms of energy production, mineral extraction, land-use and CO₂ emissions, has in most cases increased with time, indicating that industrial society is nevertheless moving towards collapse. The belief that continued and even accelerated scientific research and technological innovation will automatically result in sustainability and avert collapse is at best mistaken. Innovations in science and technology will be necessary but alone will be insufficient for sustainability. Consequently, what is most needed are specific policies designed to decrease total impact, such as (a) halting population growth via effective population stabilization plans and better access to birth control methods, (b) reducing total matter-energy throughput and pollution by removing perverse subsidies, imposing regulations that limit waste discharges and the depletion of non-renewable resources, and implementing ecological tax reform, and (c) moving towards a steady-state economy in which per-capita affluence is stabilized at lower levels by replacing wasteful conspicuous material consumption with social alternatives known to enhance subjective well-being. While science and technology must play an important role in the implementation of these policies, none will be enacted without a fundamental change in society’s dominant values of growth and exploitation. Thus, value change is the most important prerequisite for avoiding global collapse.

Watershed development in India. 1. Biophysical and societal impacts

This paper recommends a revision of watershed development policy in India in relation to the planning of development interventions involving agricultural intensification and rainwater harvesting following biophysical and societal impact studies carried out on two watershed development projects in Karnataka. A need for changes in policy has arisen in response to progressive catchments closure at the basin level and declining volumes of water flowing into village level reservoirs (known locally as tanks). Flow reductions have occurred largely as a result of increased agricultural intensification over the past 10–15 years. Field levelling, field bund construction, soil water conservation measures, farm ponds, the increase in areas under horticulture and forestry and the increased abstraction and use of groundwater for irrigation are all contributing factors to reduced flows. Planning methodologies and approaches, which may have been appropriate 20 years ago for planning water harvesting within watershed development projects, are no longer appropriate today. New planning approaches are required which (1) take account of these changed flow conditions and (2) are also able to take account of externalities, which occur when actions of some affect the livelihoods of others who have no control or influence over such activities and which (3) contribute to the maintenance of agreed minimum downstream flows for environmental and other purposes.

Resource availability,planning rigidity and Realpolitik in Lithuanian forest utilization

As tensions among diverse forest‐use interests in Lithuania are on the rise, this study examines the actual resource availability, the underlying planning approaches and the pertinent policy arena. Two 5‐year cycles of sampling‐based forest inventory provide accurate data showing that the overall timber harvest/increment ratio (or utilization intensity) is 61%. Utilization intensity is similar in state and private forests. It could potentially be raised to 70‐80%, with due account for environmental values. Such an increase is inhibited by rigid routines of forest management planning, involving inflexible rotation ages and cutting norms. Age‐class analysis indicates that the current planning practice counters its underlying aim of achieving a long‐term even flow of timber. According to a survey of key forest stakeholders, those who directly benefit from forest utilization have a weak position in the policy arena, the dominant powers being vested in the national forestry authorities. State forest enterprises have to follow restrictive plans from above, private forest owners are constrained by stern regulations and suffer from the bad image caused by the persistent myth of overuse in private forests. More rational management of Lithuanian forests is hardly possible without major shifts in the institutional set‐up accompanied by transformation of the professional ideology.     

The effects of forest harvest intensity in combination with wind disturbance on carbon dynamics in Lake States Mesic Forests

Total forest carbon (C) storage is determined by succession, disturbances, climate, and the edaphic properties of a site or region. Forest harvesting substantially affects C dynamics; these effects may be amplified if forest harvesting is intensified to provide biofuel feedstock. We tested the effects of harvest intensity on landscape C using a simulation modeling approach that included C dynamics, multiple disturbances, and successional changes in composition. We developed a new extension for the LANDIS-II forest landscape disturbance and succession model that incorporates belowground soil C dynamics derived from the CENTURY soil model. The extension was parameterized and calibrated using data from an experimental forest in northeastern Wisconsin, USA. We simulated a 9800 ha forested landscape over 400 years with wind disturbance combined with no harvesting, harvesting with residual slash left on site (‘standard harvest’), and whole-tree harvesting. We also simulated landscapes without wind disturbance and without eastern hemlock (Tsuga canadensis) to examine the effects of detrital quantity and quality on C dynamics. We estimated changes in live C, detrital C, soil organic C, total C, and forest composition. Overall, the simulations without harvesting had substantially greater total C and continued to sequester C. Standard harvest simulations had more C than the whole tree harvest simulations. Under both harvest regimes, C accrual was not evident after 150 years. Without hemlock, SOC was reduced due to a decline in detritus and a shift in detrital chemistry. In conclusion, if the intensity of harvesting increases we can expect a corresponding reduction in potential C storage. Compositional changes due to historic circumstances (loss of hemlock) may also affect forest C although to a lesser degree than harvesting. The modeling approach presented enabled us to consider multiple, interacting drivers of landscape change and the subsequent changes in forest C.     

Population viability of the Siberian Tiger in a changing landscape: Going, going and gone?

The Amur tiger (Panthera tigris altaica) is a flagship species of the boreal forest ecosystem in northeastern China and Russia Far East. During the past century, the tiger population has declined sharply from more than 3000 to fewer than 600 individuals, and its habitat has become much smaller and greatly fragmented. Poaching, habitat degradation, habitat loss, and habitat fragmentation have been widely recognized as the primary causes for the observed population decline. Using a population viability analysis tool (RAMAS/GIS), we simulated the effects of poaching, habitat degradation, habitat loss, and habitat fragmentation on the population dynamics and extinction risk of the Amur tiger, and then explored the relative effectiveness of three conservation strategies involving improving habitat quality and establishing movement corridors in China and Russia. A series of controlled simulation experiments were performed based on the current spatial distribution of habitat and field-observed vital rates. Our results showed that the Amur tiger population could be viable for the next 100 years if the current habitat area and quality were well-maintained, with poaching strictly prohibited of the tigers and their main prey species. Poaching and habitat degradation (mainly prey scarcity) had the largest negative impacts on the tiger population persistence. While the effect of habitat loss was also substantial, habitat fragmentation per se had less influence on the long-term fate of the tiger population. However, to sustain the subpopulations in both Russia and China would take much greater conservation efforts. The viability of the Chinese population of tigers would rely heavily on its connectivity with the largest patch on the other side of the border. Improving the habitat quality of small patches only or increasing habitat connectivity through movement corridors alone would not be enough to guarantee the long-term population persistence of the Amur tiger in both Russia and China. The only conservation strategy that allowed for long-term persistence of tigers in both countries required both the improvement of habitat quality and the establishment of a transnational reserve network. Our study provides new insights into the metapopulation dynamics and persistence of the Amur tiger, which should be useful in landscape and conservation planning for protecting the biggest cat species in the world.     

Using simulation to explore the functional relationships of terrestrial carnivore population indices

Population indices based on visits to detection stations commonly are used to monitor wildlife populations. Inferences about populations are based on 1 of 2 measures: (1) change in the proportion of stations visited at least once or (2) change in the cumulative number of visits by unique individuals. The functional relationships between index responses and population density is poorly understood and can lead to misinterpretation of index data when an incorrect functional relationship (e.g. linear) is assumed. We created a flexible simulation environment to study the response of detection-based population indices under a wide variety of conditions meant to reflect species life history and study design. Proportional indices exhibited non-linear saturating responses to changes in population density while cumulative indices responded linearly. Shapes of responses were functions of home range sizes, individual detection probabilities, and spatial arrangement of animals and sampling stations. Non-linear relationships of proportional indices lead to under-estimation of mean population density when data are aggregated from multiple detection stations deployed in a heterogeneous landscape. Cumulative indices have significant statistical advantages over proportional indices including smaller sample sizes required to detect density change, linearity, consistent index responses across a wide range of densities, and ability to aggregate data to meet minimum sample size requirements. Our simulation provides a flexible tool for the interpretation of station-based population indices.     

Forecasting population trend from the scaling pattern of occupancy

Forecasting the temporal trend of a focal species, its range expansion or retraction, provides crucial information regarding population viability. To this end, we require the accumulation of temporal records which is evidently time consuming. Progress in spatial data capturing has enabled rapid and accurate assessment of species distribution across large scales. Therefore, it would be appealing to infer the temporal trends of populations from the spatial structure of their distributions. Based on a combination of models from the fields of range dynamics, occupancy scaling and spatial autocorrelation, here I present a model for forecasting the population trend solely from its spatial distribution. Numerical tests using cellular automata confirm a positive correlation, as inferred from the model, between the temporal change in species range sizes and the exponent of the power-law scaling pattern of occupancy. The model is thus recommended for rapid estimation of species range dynamics from a single snapshot of its current distribution. Further applications in biodiversity conservation could provide a swift risk assessment, especially, for endangered and invasive species.     

A provider-based water planning and management model--WaterSim 4.0--for the Phoenix Metropolitan Area

Uncertainty in future water supplies for the Phoenix Metropolitan Area (Phoenix) are exacerbated by the near certainty of increased, future water demands; water demand may increase eightfold or more by 2030 for some communities. We developed a provider-based water management and planning model for Phoenix termed WaterSim 4.0. The model combines a FORTRAN library with Microsoft C# to simulate the spatial and temporal dynamics of current and projected future water supply and demand as influenced by population demographics, climatic uncertainty, and groundwater availability. This paper describes model development and rationale. Water providers receive surface water, groundwater, or both depending on their portfolio. Runoff from two riverine systems supplies surface water to Phoenix while three alluvial layers that underlie the area provide groundwater. Water demand was estimated using two approaches. One approach used residential density, population projections, water duties, and acreage. A second approach used per capita water consumption and separate population growth estimates. Simulated estimates of initial groundwater for each provider were obtained as outputs from the Arizona Department of Water Resources (ADWR) Salt River Valley groundwater flow model (GFM). We compared simulated estimates of water storage with empirical estimates for modeled reservoirs as a test of model performance. In simulations we modified runoff by 80%-110% of the historical estimates, in 5% intervals, to examine provider-specific responses to altered surface water availability for 33 large water providers over a 25-year period (2010-2035). Two metrics were used to differentiate their response: (1) we examined groundwater reliance (GWR; that proportion of a providers' portfolio dependent upon groundwater) from the runoff sensitivity analysis, and (2) we used 100% of the historical runoff simulations to examine the cumulative groundwater withdrawals for each provider. Four groups of water providers were identified, and discussed. Water portfolios most reliant on Colorado River water may be most sensitive to potential reductions in surface water supplies. Groundwater depletions were greatest for communities who were either 100% dependent upon groundwater (urban periphery), or nearly so, coupled with high water demand projections. On-going model development includes linking WaterSim 4.0 to the GFM in order to more precisely model provider-specific estimates of groundwater, and provider-based policy options that will enable "what-if" scenarios to examine policy trade-offs and long-term sustainability of water portfolios.     

Assessing the impact of biological control of Plutella xylostella through the application of Lotka–Volterra model

The Lotka–Volterra model was applied to the population densities of diamondback moth (DBM), Plutella xylostella (L.) and its exotic larval parasitoid Diadegma semiclausum (Hellen) data that was collected earlier by icipe's DBM biological control team. The collections were done for 15 months before the release and 36 months after release of the parasitoid in two areas; in Werugha, Coast Province of Kenya and Tharuni, Central Province of Kenya, respectively. For each area in pre- and post-release periods, we estimated Lotka–Volterra model parameters from the minimization of the loss function between the theoretical and experimental time-series datasets following the Nelder-Mead multidimensional method. The model estimated a reduction in the value of the steady state of DBM population from 4.86 to 2.17 in Werugha and from 6.11 to 3.76 and 3.45 (with and without exclusion of the time before D. semiclausum recovery) in Tharuni when transiting from the pre- and post-release periods, respectively. This change was a consequence of the newly introduced parasitoid, in the areas. The study presented a successful and detailed technique for non-linear model parameters restoration which was demonstrated by the correct mimicking of empirical datasets from the classical biological control with D. semiclausum, in different areas of Kenya. The applied model has measured the parasitoids impact on the DBM biological control through a quantitative estimate of the effectiveness of the newly introduced species D. semiclausum. These equations may therefore be used as tool for decision making in the implementation for such pests’ management system strategy.