Comparison of airborne and terrestrial gamma spectrometry measurements - evaluation of three areas in southern Sweden

The Geological Survey of Sweden (SGU) has been conducting airborne gamma spectrometry measurements of natural radioactivity in Sweden for more than 40 years. Today, the database covers about 80% of the country’s land surface. This article explores the first step of putting this data into use in radioactive source search at ground level. However, in order to be able to use the airborne background measurements at ground level, SGU data must be validated against terrestrial data. In this work, we compare the SGU data with data measured by a portable backpack system. This is done for three different areas in southern Sweden. The statistical analysis shows that a linear relationship and a positive correlation exist between the air and ground data. However, this linear relationship could be revealed only when the region possessed large enough variations in areal activity. Furthermore, the activity distributions measured show good agreement to those of SGU. We conclude that the SGU database could be used for terrestrial background assessment, given that a linear transfer function is established.     

Radionuclide content of building materials and associated gamma dose rates in Egyptian dwellings

Studies have been carried out to determine the natural radioactivity in some building materials (bricks, tiles, marble and ceramics) and their associated radiation hazard. The radioactivity concentrations of ²²⁶Ra ²³²Th and ⁴⁰K were measured using a gamma spectrometer with a Hp–Ge detector. The activities of ²³⁸U and ²³⁴U were measured using an alpha-spectrometer with a surface barrier detector after applying a radiochemical procedure. The ²³⁴U/²³⁸U isotopic ratios were calculated. The radium equivalent activities and the radiation hazard index associated with the natural radionuclides were calculated. A computer program was developed and applied to calculate the dose rate a person will receive from the walls of a room constructed from the studied building materials.     

原子吸收光谱法测定酸雨中K、Na、Ca、Mg方法改进

用0．1％硝酸溶液配制混合标准溶液,不加抗干扰试剂,火焰原子吸收光谱法直接测定酸雨中K、Na、Ca、Mg,方法精密度、准确度满足酸雨监测的分析要求。     

酒石酸钾钠溶液对氨氮标准曲线的影响

通过对酒石酸钾钠溶液存放时间和保存条件的跟踪试验,发现该试剂的存放时间越长,绘制的氨氮标准曲线的截距就越大;并分析了在绘制氨氮标准曲线时显色液易浑浊和截距常常偏大的原因;就此提出了酒石酸钾钠溶液的有效期和保存方法,以进一步提高氨氮测定的准确度。     

原子吸收法测定降水中的钾、钠、钙、镁的改进

对标准分析方法中的K、Na、Ca、Mg分开测定改进为混合测定。改进法与标准法的校准曲线、精密度与准确度均较为一致。改进法简化了操作程序，提高了工作效率。     

PPH (potassium polyacrylate & hectorite) composite materials – A new fire accident emergency method for thermal protection of adjacent tanks

When a chemical tank fire happens in a storage area, it is very important to protect adjacent tanks so as to decrease fire accident losses. In this paper, a new thermal protection method was put forward based on a PPH (potassium polyacrylate & hectorite) thermal insulation composite material spraying on an adjacent tank under fire. Firstly, the PPH material was prepared successfully by a polymerization reaction of potassium acrylate, hectorite, NaHSO₃ and (NH₄)₂S₂O₈. Secondly, thermal insulation performance of the PPH material was characterized by heat transfer process at high incident heat flux using cone calorimeter. The results show that thermal insulation performance of the PPH material is affected by a content change of (NH₄)₂S₂O₈, NaHSO₃ and hectorite in formulations. The content of (NH₄)₂S₂O₈ 0.14 wt%, NaHSO₃ 1.38 wt% and hectorite 1.4 wt% was an optimum formulation ratio to obtain best thermal insulation performance. Finally, possible thermal insulation mechanisms of the PPH material were presented using SEM, TG and TG-IR techniques. One of the thermal insulation mechanisms is the incident heat flux absorbed by water evaporation from the PPH material. Another is the thermal protection of the char formed from the PPH material at high incident thermal radiation, which can prevent heat and mass transfer.     

Impact of the 1998 Central American fires on PM2.5 mass and composition in the southeastern United States

The impact of the Central American fires on PM_2.5 mass concentration and composition in the Tennessee Valley region during portions of May, 1998, has been quantified. Elevated concentrations of smoke aerosol tracers—fine potassium, (and to a lesser extent, calcium and silicon) and, where available, organic and elemental carbon—were observed in the region during times in which satellite imagery (TOMS and GOES-8) showed regional transport of hazy, smoky airmasses from southern Mexico and adjacent areas of Central America. Back-trajectories from network sites in the Tennessee Valley network were consistent with this regional transport. The extent of transport of extra-regional fine particle mass during May, 1998, is discussed relative to the new US fine particle mass-based standards for fine particulate matter.     

Potential Use of Olive-Waste Ash from Cogeneration Plants as a Soil Amendment

A greenhouse study was conducted to evaluate the potential use of olive-cake ash as a soil amendment, using pepper (Capsicum annuum, L. cv Italian sweet). Three soils of different pH (acidic, neutral and calcareous) were used. Treatments included a control (no fertilizer application), NPK fertilizer, and two ash-application rates that provided a complete dose (equivalent to the K₂O amount in the fertilizer) and a half dose (equivalent to half the K₂O amount in the fertilizer), respectively. The ash was effective in raising soil pH. Ash treatments increased the pepper (stems and leaves) dry matter yield over control; although these increases were lower than treatment including NPK. Application of ash significantly increased leaf P concentration and AB-DTPA extractable P in soil, especially in the acidic and neutral soils. Leaf K concentrations and readily and slowly available K forms in soils were affected positively by the addition of the ash. These results demonstrate that ash from the combustion of wet olive cake can be used as a beneficial organic soil amendment.     

Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet

Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.     

Drinking water treatment using a submerged internal-circulation membrane coagulation reactor coupled with permanganate oxidation

A submerged internal circulating membrane coagulation reactor(MCR) was used to treat surface water to produce drinking water. Polyaluminum chloride(PACl) was used as coagulant,and a hydrophilic polyvinylidene fluoride(PVDF) submerged hollow fiber microfiltration membrane was employed. The influences of trans-membrane pressure(TMP), zeta potential(ZP) of the suspended particles in raw water, and KMnO_4 dosing on water flux and the removal of turbidity and organic matter were systematically investigated. Continuous bench-scale experiments showed that the permeate quality of the MCR satisfied the requirement for a centralized water supply, according to the Standards for Drinking Water Quality of China(GB 5749-2006), as evaluated by turbidity(1 NTU) and total organic carbon(TOC)(5 mg/L)measurements. Besides water flux, the removal of turbidity, TOC and dissolved organic carbon(DOC) in the raw water also increased with increasing TMP in the range of 0.01–0.05 MPa. High ZP induced by PACl, such as 5–9 mV, led to an increase in the number of fine and total particles in the MCR, and consequently caused serious membrane fouling and high permeate turbidity.However, the removal of TOC and DOC increased with increasing ZP. A slightly positive ZP, such as 1–2 mV, corresponding to charge neutralization coagulation, was favorable for membrane fouling control. Moreover, dosing with KMnO_4 could further improve the removal of turbidity and DOC, thereby mitigating membrane fouling. The results are helpful for the application of the MCR in producing drinking water and also beneficial to the research and application of other coagulation and membrane separation hybrid processes.