STREAM CHEMISTRY IN THE SOUTHERN BLUE RIDGE: FEASIBILITY OF A REGIONAL SYNOPTIC SAMPLING APPROACH1

ABSTRACT: A pilot study, which was conducted in the Southern Blue Ridge geographical province of the Southeastern U.S., demonstrated the feasibility of a probability-based regional synoptic design for the National Stream Survey, which is a project aimed at estimating the number and percentage of streams in various regions of the U.S. that are acidic or at risk from acid deposition. Estimated population distributions for key chemical variables were not appreciably affected by week-to-week variability in stream chemistry during the spring index period chosen for the study. Differences were observed in estimated acid neutralizing capacity (ANC), nitrate, and pH frequency distributions between spring and summer. Observations made at the downstream node did not represent the chemistry of the entire reach for some variables (ANC and nitrate) as indicated by differences in chemical concentrations between upstream and downstream sampling locations. Coefficients of variation in chemical species were low enough to provide a reasonably stable classification of streams based on ANC. Although median ANC, sulfate, and nitrate concentrations were quite low in the region, the probability of finding streams with ph < 6.3 is less than 1.3 percent at the α= 0.05 confidence level.     

Understanding the multifunctionality in Cu-doped BiVO4 semiconductor photocatalyst

A visible light-induced, Cu-doped BiVO_4 photocatalyst was synthesized by a microwave hydrothermal method. The photocatalytic efficiency was investigated in the degradation of model water pollutants like Methylene Blue(dye) and ibuprofen(pharmaceuticals), as well as the inactivation of Escherichia coli(bacteria). The Cu-doped BiVO4 samples showed better efficiency than undoped BiVO_4, and the 1 wt.% Cu-doped BiVO_4 sample showed the best efficiency. The degradation of Methylene Blue reached 95%, while the degradation of ibuprofen reached 75%, and the inactivation of E. coli reached 85% in irradiation with visible light. The appearance of additional absorption band shoulders and widening of the optical absorption in the visible range makes the prepared powder an efficient visible light-driven photocatalyst. Moreover, the formation of an in-gap energy state just above the valance band as determined by density functional theory(DFT) first principle calculation, facilitates the wider optical absorption range of the doped system. Similarly, this in-gap energy state also acts as an electron trap, which is favorable for the efficient separation and photoexcited charge carriers' transfer process. The formation of oxygen vacancies due to doping also improved the separation of the charge carrier, which promoted the trapping of electrons and inhibited electron hole recombination, thus increasing the photocatalytic activity. No decrease in the efficiency of the 1 wt.% Cu-doped BiVO_4 photocatalyst in the degradation of ibuprofen over three consecutive cycles revealed the stability of the photocatalyst towards photocorrosion. These findings highlight the multifunctional applications of Cu-doped BiVO_4 in wastewater containing multiple pollutants.     

丙溴磷影响海洋微藻生长机理的初步研究

研究了丙溴磷对三角褐指藻和青岛大扁藻生长的影响及其可能的机理。结果显示，低浓度的丙溴磷可以刺激它们的生长，高浓度的丙溴磷则对其生长产生抑制作用；低浓度丙溴磷还使藻细胞的脂质过氧化程度在低水平增高，ＳＯＤ活性有所降低；高浓度时则使其指质过氧化程度过量升高，ＳＯＤ活性显著下降，加入抗氧化剂不仅可抑制低浓度丙溴磷对微藻生长的刺激效应，而且能缓解高浓度丙溴磷对微藻的毒害作用，因此，丙溴磷作用于微灌的抗氧化     

酵母Candida krusei对合成染料的脱色

通过筛选实验,从土壤中新分离到1株对活性艳红K-2BP具有明显脱色效果的酵母菌株Y-G-I,经鉴定为克鲁斯假丝酵母Candida krusei．该菌株对含活性艳红K-2BP起始浓度为200mg／L的培养基,最大脱色率为99％,达到最大脱色率的时间是12h．克鲁斯假丝酵母的最佳接种量应不低于5％（体积分数）,培养基最适pH在4～9之间,氮源（NH4）2S04浓度不低于0．1％,相对应的碳源葡萄糖浓度不低于0．5％．对脱色机理的研究表明,该菌株对活性艳红K-2BP的去除属于降解脱色．此外,该菌株对另外9种染料（50mg／L）的脱色率在62％～96％之间．其中,对偶氮染料弱酸艳红B、活性黑KN-B和活性红M-3BE的脱色率都达到了90％以上,对三苯甲烷染料（酸性媒介漂蓝B）的脱色率达到了93％．表明克鲁斯假丝酵母在染料废水的处理上可能具有较好地应用潜能．     

Mechanism of Methylene Blue adsorption on hybrid laponite-multi-walled carbon nanotube particles

The kinetics of adsorption and parameters of equilibrium adsorption of Methylene Blue(MB)on hybrid laponite-multi-walled carbon nanotube(NT)particles in aqueous suspensions were determined.The laponite platelets were used in order to facilitate disaggregation of NTs in aqueous suspensions and enhance the adsorption capacity of hybrid particles for MB.Experiments were performed at room temperature(298 K),and the laponite/NT ratio(X_l)was varied in the range of 0–0.5.For elucidation of the mechanism of MB adsorption on hybrid particles,the electrical conductivity of the system as well as the electrokinetic potential of laponite-NT hybrid particles were measured.Three different stages in the kinetics of adsorption of MB on the surface of NTs or hybrid laponite-NT particles were discovered to be a fast initial stage Ⅰ(adsorption time t=0–10 min),a slower intermediate stage Ⅱ(up to t=120 min)and a long-lasting final stage Ⅲ(up to t=24 hr).The presence of these stages was explained accounting for different types of interactions between MB and adsorbent particles,as well as for the changes in the structure of aggregates of NT particles and the long-range processes of restructuring of laponite platelets on the surface of NTs.The analysis of experimental data on specific surface area versus the value of X_l evidenced in favor of the model with linear contacts between rigid laponite platelets and NTs.It was also concluded that electrostatic interactions control the first stage of adsorption at low MB concentrations.     

Biogeochemical processes at the fringe of a landfill leachate pollution plume: potential for dissolved organic carbon, Fe(II), Mn(II), NH4, and CH4 oxidation

Various redox reactions may occur at the fringe of a landfill leachate plume, involving oxidation of dissolved organic carbon (DOC), CH4, Fe(II), Mn(II), and NH4 from leachate and reduction of O2, NO3 and SO4 from pristine groundwater. Knowledge on the relevance of these processes is essential for the simulation and evaluation of natural attenuation (NA) of pollution plumes. The occurrence of such biogeochemical processes was investigated at the top fringe of a landfill leachate plume (Banisveld, the Netherlands). Hydrochemical depth profiles of the top fringe were captured via installation of a series of multi-level samplers at 18, 39 and 58 m downstream from the landfill. Ten-centimeter vertical resolution was necessary to study NA within a fringe as thin as 0.5 m. Bromide appeared an equally well-conservative tracer as chloride to calculate dilution of landfill leachate, and its ratio to chloride was high compared to other possible sources of salt in groundwater. The plume fringe rose steadily from a depth of around 5 m towards the surface with a few meters in the period 1998-2003. The plume uplift may be caused by enhanced exfiltration to a brook downstream from the landfill, due to increased precipitation over this period and an artificial lowering of the water level of the brook. This rise invoked cation exchange including proton buffering, and triggered degassing of methane. The hydrochemical depth profile was simulated in a 1D vertical reactive transport model using PHREEQC-2. Optimization using the nonlinear optimization program PEST brought forward that solid organic carbon and not clay minerals controlled retardation of cations. Cation exchange resulted in spatial separation of Fe(II), Mn(II) and NH4 fronts from the fringe, and thereby prevented possible oxidation of these secondary redox species. Degradation of DOC may happen in the fringe zone. Re-dissolution of methane escaped from the plume and subsequent oxidation is an explanation for absence of previously present nitrate and anaerobic conditions in pristine groundwater above the plume. Stable carbon isotope (delta13C) values of methane confirm anaerobic methane oxidation immediately below the fringe zone, presumably coupled to reduction of sulfate, desorbed from iron oxide. Methane must be the principle reductant consuming soluble electron-acceptors in pristine groundwater, thereby limiting NA for other solutes including organic micro-pollutants at the fringe of this landfill leachate plume.     

Numerical simulations of pyrite oxidation and acid mine drainage in unsaturated waste rock piles

Numerical simulations of layered, sulphide-bearing unsaturated waste rock piles are presented to illustrate the effect of coupled processes on the generation of acid mine drainage (AMD). The conceptual 2D systems were simulated using the HYDRUS model for flow and the POLYMIN model for reactive transport. The simulations generated low-pH AMD which was buffered by sequential mineral dissolution and precipitation. Sulphide oxidation rates throughout the pile varied by about two orders of magnitude (0.004-0.4 kg m-3 year-1) due to small changes in moisture content and grain size. In the fine-grained layers, the high reactive surface area induced high oxidation rates, even though capillary forces kept the local moisture content relatively high. In waste rock piles with horizontal layers, most of the acidity discharged through vertical preferential flow channels while with inclined fine grained layers, capillary diversion channeled the AMD to the outer slope boundary, keeping the pile interior relatively dry. The simulation approach will be useful for helping evaluate design strategies for controlling AMD from waste rock.     

磁场协同Ca2O2/Fe2+处理活性红染料废水的实验研究

利用磁场协同Ca2O2/Fe2 催化氧化体系处理活性红染料废水,研究不同磁化时间、磁场强度和催化氧化各种影响因素下对活性红染料模拟废水的去除率.结果表明:在pH值为3,C(FeSO4·7H2O)=50 mg,C(Ca2O2)=1.45g条件下,反应20min,去除率达62.5%.外加磁场磁场强度为427.8 mT的作用下,磁化反应20 min,CODCr的去除率提高了8.3%.     

Reactive oxygen species may play an essential role in driving biological evolution: The Cambrian Explosion as an example

The Cambrian Explosion is one of the most significant events in the history of life; essentially all easily fossilizable animal body plans first evolved during this event. Although many theories have been proposed to explain this event, its cause remains unresolved. Here, we propose that the elevated level of oxygen, in combination with the increased mobility and food intake of metazoans, led to increased cellular levels of reactive oxygen species (ROS), which drove evolution by enhancing mutation rates and providing new regulatory mechanisms. Our hypothesis may provide a unified explanation for the Cambrian Explosion as it incorporates both environmental and developmental factors and is also consistent with ecological explanations for animal radiation. Future studies should focus on testing this hypothesis, and may lead to important insights into evolution.     

Probe into effect of the initiator on the thermal runaway hazards of methyl methacrylate bulk polymerization

The bulk polymerization of methyl methacrylate (MMA) is of great importance in chemical industry, but the polymerization process is highly hazardous, and few reports have focused on the effect of initiators on its thermal hazards. In this work, to thoroughly explore the thermal hazard characteristics, the runaway behavior of MMA bulk polymerization is investigated by a combination of thermodynamics experimental and kinetics theoretical methods. The results indicate that the presence of initiator exhibits an undesirable thermal hazard to the MMA bulk polymerization, and its exothermic behavior is also greatly influenced by the type and concentration of initiator. For azobisisoheptanenitrile (ABVN), azodiisobutyronitrile (AIBN) and dibenzoyl peroxide (BPO) initiators as examples, the AIBN-initiated reaction has the shortest adiabatic induction period (39.51 min), whereas the BPO-initiated polymerization exhibits the strongest maximum temperature-rising rate and maximum pressure-rising rate. Under adiabatic runaway, the temperature and pressure change significantly with increasing AIBN concentration, revealing a great potential risk of thermal runaway. Kinetic parameters are calculated to further understand the thermal runaway mechanisms, showing a strong agreement with the adiabatic experimental data. Finally, based on the cooling failure scenario, severity grading is determined by the evaluation criteria. The current work provides extensive data as a reference and guidance for the process design and optimization of MMA bulk polymerization from the perspective of safety.