Parvovirus B19 infection in pregnancy: new insights and management

In this article, we review the virology, pathology, epidemiology and clinical spectrum of intrauterine human parvovirus B19 (B19V) infection, including intrauterine fetal death, non-immune hydrops fetalis, thrombocytopenia and neurological manifestations such as pediatric stroke and perivascular calcifications. In addition, we discuss the new insights into the neurodevelopmental outcome of intrauterine B19V infection. Current diagnosis and management of B19V infection is summarized, including a diagnostic and follow-up flowchart for practical clinical use. Copyright © 2011 John Wiley & Sons, Ltd.     

基于C/S+B/S混合模式的城市重大危险源管理系统的研究

分析城市重大危险源管理系统的功能结构,针对现阶段技术应用的局限性,笔者提出C/S+B/S混合模式的解决方案;对数据库系统、网络构架及安全性、兼容性和模型系统等关键技术进行研究;开发出基于C/S+B/S混合模式的城市重大危险源管理系统。该系统对解决城市重大危险源统一管理与布局分散的矛盾,实现重大危险源动态监管和重大事故应急指挥智能化,提高事故应急救援指挥和救援行为的效率有重要意义。     

田间增强UV-B辐射对麦田生态系统Fe营养和累积的影响

研究大田栽培和自然光条件下,模拟ＵＶ－Ｂ辐射（ＵＶ－Ｂ,２８０ｎｍ ～３１５ｎｍ ）增强对麦田生态系统Ｆｅ营养和累积的影响．在４ 个生育期中,ＵＶ－Ｂ辐射显著增加叶和穗Ｆｅ含量,显著降低根Ｆｅ 含量,并改变茎Ｆｅ 含量．叶Ｆｅ累积对ＵＶ－Ｂ辐射的响应有明显的生育期之间的差异． 分蘖期无显著变化,拔节期和扬花期显著增加,而成熟期显著降低．在各生育期,ＵＶ－Ｂ辐射显著降低叶、根和穗Ｆｅ累积．ＵＶ－Ｂ辐射显著降低春小麦不同生育期Ｆｅ总累积,在５．３１ｋＪ·ｍ^-2 ＵＶ－Ｂ辐射下,降低最显著．ＵＶ－Ｂ辐射还降低春小麦群体Ｆｅ输出．麦田土壤速效Ｆｅ含量增加是春小麦群体Ｆｅ输出降低的结果,可能导致土壤库中Ｆｅ 储量的增加．     

利用涡流空化效应降解水中罗丹明B

涡流空化通过特殊结构的涡流仓产生,流体在涡流仓中形成压力远低于大气压力的低压区域,从而产生空化效应.通过CFX计算软件对涡流形成情况进行了模拟计算,确定了适宜的结构参数.对罗丹明B进行了实际降解试验,考察了压力和温度对降解的影响,结果表明,压力提高对降解有利,而温度的影响有一定复杂性.涡流空化降解和超声空化降解的对比试验结果表明,涡流空化降解效率远大于超声空化.      

新型负载型光催化剂的制备及其光催化活性研究

以硝酸钙和磷酸为原料,采用均匀沉淀法制备了羟基磷灰石(HAP);以HAP为载体,采用浸渍-提拉法制得负载型光催化剂TiO2／HAP,并用其对酸性媒介红B进行光催化氧化实验;探讨了HAP煅烧温度和TiO2负载量对TiO2／HAP光催化活性的影响,并利用XRD、FT—IR和TEM对载体及TiO2／HAP催化剂进行了表征。实验结果表明,煅烧温度、TiO2负载量对HAP吸附性能及催化活性有较大的影响;TiO2／HAP的催化活性明显优于TiO2／玻片的催化活性。     

染料脱色菌的筛选及对活性艳红X-3B的脱色研究

从广州某印染厂生化处理池的活性污泥中筛选到三株对活性艳红X-3B具有高效脱色作用的真菌,其中菌株HMX-3的脱色能力最强。考察了培养时间、温度、培养方式、pH值以及染料浓度对HMX-3脱色能力的影响。结果表明,菌株HMX-3对150mg/L X-3B的24h脱色率达65.8%,经60h可使其完全脱色;HMX-3对活性艳红X-3B脱色的最适温度为25℃~35℃,最佳pH值为6~8,且振荡培养较静置培养条件下的脱色率高;随染料浓度的增加,脱色率降低,但对于400mg/L的X-3B在72h时的脱色率可达86.7%。     

微米SiC/石墨烯复合物光催化降解罗丹明B

为发展低耗和环境友好的有机物降解技术,采用光催化还原制备微米级碳化硅(SiC)/石墨烯复合材料,XRD、FTIR、Raman光谱、XPS和SEM等手段表征其物相组成和形貌结构,并以罗丹明B(RhB)为模拟污染物,研究了复合材料在可见光照射下的光催化活性和稳定性;通过活性物种捕获实验初步探讨了RhB的光催化降解机制.结果表明,SiC与石墨烯复合延长了光生电子和光生空穴的寿命,提高了材料的光催化活性与稳定性.当SiC/石墨烯配比为1∶0. 8时,光照60 min时RhB的降解率可以达到92. 7%,降解过程符合一级反应动力学方程.光催化降解RhB过程中,主要活性物种的贡献依次为:光生空穴(h~+)超氧阴离子自由基(·O_2~-)光生电子(e~-)羟基自由基(·OH).     

Combined pollution of arsenic and Polymyxin B enhanced arsenic toxicity and enriched ARG abundance in soil and earthworm gut microbiotas

Polymyxin B (PMB) is considered as the last line of antibiotic defense available to humans. The environmental effects of the combined pollution with PMB and heavy metals and their interaction mechanisms are unclear. We explored the effects of the combined pollution with PMB and arsenic (As) on the microbial composition of the soil and in the earthworm gut, as well as the spread and transmission of antibiotic resistance genes (ARGs). The results showed that, compared with As alone, the combined addition of PMB and As could significantly increase the bioaccumulation factor and toxicity of As in earthworm tissues by 12.1% and 16.0%, respectively. PMB treatment could significantly increase the abundance of Actinobacteria in the earthworm gut (from 35.6% to 45.2%), and As stress could significantly increase the abundance of Proteobacteria (from 19.8% to 56.9%). PMB and As stress both could significantly increase the abundance of ARGs and mobile genetic elements (MGEs), which were positively correlated, indicating that ARGs might be horizontally transferred. The inactivation of antibiotics was the main resistance mechanism that microbes use to resist PMB and As stress. Network analysis showed that PMB and As might have antagonistic effects through competition with multi-drug resistant ARGs. The combined pollution by PMB and As significantly promoted the relative abundance of microbes carrying multi-drug resistant ARGs and MGEs, thereby increasing the risk of transmission of ARGs. This research advances the understanding of the interaction mechanism between antibiotics and heavy metals and provides new theoretical guidance for the environmental risk assessment and combined pollution management.     

Fe0/海藻酸钙微球还原-Fenton氧化协同降解酸性红B

以海藻酸钠为固定基质制备了Fe~0/海藻酸钙微球,探讨基于Fe~0/海藻酸钙微球对染料还原-Fenton氧化协同降解转化的特性及机制.通过FT-IR、SEM、BET、XPS等方法对材料进行了表征,考察了不同还原氧化体系、Fe~0/海藻酸钙微球投加量、溶液p H等因素对酸性红B(ARB)降解效果的影响,以及Fe~0/海藻酸钙微球还原-氧化过程中Fe~0的稳定性和海藻酸钙微球重复催化性能.结果表明,Fe~0/海藻酸钙微球的多级孔道结构对染料有一定的吸附作用.在Fe~0/海藻酸钙微球还原染料阶段中,Fe~0投加量为0. 24 g·L-1,溶液初始p H为2. 96时,180 min后ARB的色度去除率可达到96. 8%.在后续的Fenton氧化阶段,加入10. 75 mmol·L-1H2O2后,ARB色度去除率达到99%,矿化程度提高至64. 7%.与Fe~0/海藻酸钙微球还原体系和Fe3+/海藻酸钙微球Fenton氧化体系相比,Fe~0/海藻酸钙微球还原-Fenton氧化协同体系能够实现ARB的有效脱色和矿化.由于海藻酸钙中羧基对Fe2+/Fe3+的配位作用,Fe离子从微球中转移到溶液中的量为微球中总铁量的3. 9%左右.由于Fe离子能够较好地固定在海藻酸钙微球中,在p H较高条件下,减少了Fe氢氧化物的生成,Fenton反应能够在较宽p H范围内进行,含有Fe2+/Fe3+的海藻酸钙微球表现出较好的重复催化氧化性能.因此,Fe~0/海藻酸钙微球还原-Fenton氧化协同技术为染料废水的处理提供了一种较好的解决方案.     

活性炭纤维负载柠檬酸铁活化过硫酸氢钾降解罗丹明B的研究

以ACF（活性炭纤维）为载体,制备出一种新的非均相催化剂ACF@Cit-Fe/S〔将Cit-Fe（柠檬酸铁）负载在ACF表面并引入S元素〕,并采用SEM-EDS（电镜-能谱）、XPS（X射线光电子能谱）对其进行表征,研究其活化PMS（过硫酸氢钾）降解染料RhB（罗丹明B）的降解效果.结果表明:①ACF表面成功负载了Cit-Fe和S元素,Cit-Fe和S元素的掺杂增强了ACF催化PMS的性能,能有效降解染料RhB,反应120 min时RhB的脱色率达98%.②ρ（ACF@Cit-Fe/S）、c（PMS）对RhB降解有一定的影响,ρ（ACF@Cit-Fe/S）为0.5 g/L、c（PMS）为6 mmol/L是降解RhB（10 mg/L）的最佳投加量.③温度对RhB降解速率的影响符合阿伦尼乌斯模型,通过计算得出活化能为39.47 kJ/mol,降解过程是一个表面反应控制过程.④以叔丁醇、甲醇、苯酚为分子探针的自由基清除试验显示,SO₄-·（硫酸根自由基）和HO·（羟基自由基）是降解反应过程中主要的自由基,其主要存在于催化剂表面及其周围.研究显示,ACF@Cit-Fe/S能用于活化PMS的高级氧化体系中,ACF@Cit-Fe/S表面丰富的电子转移过程导致其活化PMS的能力增强,从而促进SO₄-·和HO·的产生,提高RhB的降解效率.