中国山区沟谷泥石流危险度的定量判定法

本文根据专家系统调查,确定了一次泥石流冲出物最大方量和泥石流暴发频率作为判定泥石流危险度的主要危险因子。运用灰色关联度分析,优选出10项判定泥石流危险度的次要危险因子,并根据关联序确定了它们的权重。在各危险因子等级划分的基础上,得出了泥石流危险度的定量计算公式。通过实例检验,证明该判定方法具有60％以上的可靠度。     

淡水鱼类种质资源信息系统的研制

采用人工智能和多媒体技术、建成了淡水鱼类种质资源信息系统。本系统完整、准确地保存了鲢、鳙、草鱼、团头鲂、方正银鲫、兴国红鲤、散鳞镜锂、尼罗罗非鱼、奥利亚罗非鱼等十种淡水鱼类种质标准参数及其性状图形、图像集、,包括鱼类可量和可数性状;鱼类年龄与生长特征;鱼类性成熟和怀卵量特征;鱼类耗氧量、耗氧率和窒息点指标;鱼类肌肉成份;鱼类染色体核型图像;鱼类同工酶酶谱组成指标,为进行种质鉴别和保存探索了一条新路     

A convective wind resource model for Solar Vortex power generation

ABSTRACT

Climate change has increased the need for clean, nonpolluting energy sources to decrease dependence on fossil fuels. Alternative energy sources, mainly solar and horizontal wind, have been the primary focus for producing clean energy. New technologies are being developed, such as the Solar Vortex (SoV), which was developed at the Georgia Institute of Technology, and relies on a vertical wind resource to generate power. The National Renewable Energy Lab (NREL) has resource models representing solar and horizontal wind resources across the 48 United States. This research developed a vertical wind resource model that is comparable in resolution to NREL’s solar and horizontal wind resource models and uses the model for estimating power output for the SoV. This model complements NREL’s existing resource models and supports the deployment of an additional clean energy generation technology. The model was applied to Mesa, Arizona to find feasible sites for a small-scale vertical wind farm.     

DEVELOPMENT OF A BASIN GEOMORPHIC INFORMATION SYSTEM USING A TIN-DEM DATA STRUCTURE1

ABSTRACT: To make a distributed rainfall-runoff model, it is very important to build a model of topographic surface of a basin which takes account of the direction of water flow. In this paper, a geographic information system in hydrologic modeling, the BGIS (Basin Geomorphic Information Systems) are presented for modeling a river basin using a TIN-DEM (Triangulated Irregular Network - Digital Elevation Model) data structure. The BGIS have two core systems, which are the TIN-DEM generating system and the topographic analysis system. In the TIN-DEM generating system, landscapes are modeled as a set of contiguous non-overlapping terangular facets whose vertices are made up of points on a regular grid DEM and on river segments. These triangular facets are subdivided, if needed, so that each of them has only one side through which water flows out. The TIN-DEM generating system is made up of four modules, (1) a module for generating triangles from a grid DEM, (2) a module for getting rid of pits, (3) a module for joining discontinuous valley segments to a channel network, (4) a module for subdividing triangular facets. In the topographic analysis system, using datasets processed with the TIN-DEM generating system, a watershed source area for any segments in a stream network are delineated automatically, and topographic attributes of slopes, aspects, flow path lengths and upslope contributing areas are computed.     

Is “No-Threshold” a “Non-Concept”?

A controversy prominent in scientific literature that has carried over to newspapers, magazines, and popular books is having serious social and political expressions today: “Is there, or is there not, a threshold below which exposure to a carcinogen will not induce cancer?” The distinction between establishing the existence of this threshold (which is a theoretical question) and its value (which is an experimental one) gets lost in the scientific arguments. Establishing the existence of this threshold has now become a philosophical question (and an emotional one). In this paper I qualitatively outline theoretical reasons why a threshold must exist, discuss experiments which measure thresholds on two chemicals, and describe and apply a statistical method for estimating the threshold value from exposure-response data.     

Adversarial safety analysis: borrowing the methods of security vulnerability assessments

INTRODUCTION: Safety and security share numerous attributes. The author, who heads the (Security) Vulnerability Assessment Team at Los Alamos National Laboratory, therefore argues that techniques used to optimize security might be useful for optimizing safety. OPTIMIZING SECURITY: There are three main ways to attempt to improve security-security surveys, risk assessment (or "design basis threat"), and vulnerability assessments. The latter is usually the most effective. SAFETY ANALOGS: Vulnerability assessment techniques used to improve security can be applied to safety analysis--even though safety is not ordinarily viewed as having malicious adversaries (other than hazards involving deliberate sabotage). Thinking like a malicious adversary can nevertheless have benefits in identifying safety vulnerabilities. SUGGESTIONS: The attributes of an effective safety vulnerability assessment are discussed, and recommendations are offered for how such an adversarial assessment might work. CONCLUSION: A safety vulnerability assessment can potentially provide new insights, a fresh and vivid perspective on safety hazards, and increased safety awareness.     

Health risk assessment of PCDD/F emissions from a hazardous and medical waste incinerator in Turkey

A multimedia risk assessment procedure was conducted to determine the fate and transport of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emissions from the Izmit Hazardous and Medical Waste Incinerator (IZAYDAS) in Turkey and their potential health risks. Congener concentrations in ambient air and their deposition rates were determined by an air dispersion model (ISCST3). Their transfer to some plant groups and animal tissues was predicted by food chain modeling. Exposure scenarios were produced based on three receptor groups (urban, semiurban, and rural) and five subgroups determined according to ages. Daily intakes of PCDD/Fs via exposure pathways were determined based on three different emission scenarios for each group and subgroup. Estimated incremental PCDD/F doses caused by the incinerator emissions in central-tendency scenario were computed as between 2.31 x 10(-6) and 0.008 pg TEQ kg(-1) bodyweight (bw) day(-1) on average for all the receptors other than infants in all the settings, while the range was 3.01 x 10(-5)-0.081 pg TEQ kg(-1) bw day(-1) for infants. Sensitivity analysis showed that the consumption of vegetal products and their locally grown fractions are the most significant parameters in the exposure to PCDD/Fs in the area.     

The ecological effects of trichloroacetic acid in the environment

Trichloroacetic acid (TCAA) is a member of the family of compounds known as chloroacetic acids, which includes mono-, di- and trichloroacetic acid. The significant property these compounds share is that they are all phytotoxic. TCAA once was widely used as a potent herbicide. However, long after TCAA's use as a herbicide was discontinued, its presence is still detected in the environment in various compartments. Methods for quantifying TCAA in aqueous and solid samples are summarized. Concentrations in various environmental compartments are presented, with a discussion of the possible formation of TCAA through natural processes. Concentrations of TCAA found to be toxic to aquatic and terrestrial organisms in laboratory and field studies were compiled and used to estimate risk quotients for soil and surface waters. TCAA levels in most water bodies not directly affected by point sources appear to be well below toxicity levels for the most sensitive aquatic organisms. Given the phytotoxicity of TCAA, aquatic plants and phytoplankton would be the aquatic species to monitor for potential effects. Given the concentrations of TCAA measured in various soils, there appears to be a risk to terrestrial organisms. Soil uptake of TCAA by plants has been shown to be rapid. Also, combined uptake of TCAA from soil and directly from the atmosphere has been shown. Therefore, risk quotients derived from soil exposure may underestimate the risk TCAA poses to plants. Moreover, TCE and TCA have been shown to be taken up by plants and converted to TCAA, thus leading to an additional exposure route. Mono- and di-chloroacetic acids can co-occur with TCAA in the atmosphere and soil and are more phytotoxic than TCAA. The cumulative effects of TCAA and compounds with similar toxic effects found in air and soil must be considered in subsequent terrestrial ecosystem risk assessments.     

Modeling the Suitability of Potential Wetland Mitigation Sites with a Geographic Information System

Wetland mitigation is frequently required to compensate for unavoidable impacts to wetlands. Site conditions and landscape context are critical factors influencing the functions that created wetlands perform. We developed a spatial model and used a geographic information system (GIS) to identify suitable locations for wetland mitigation sites. The model used six variables to characterize site conditions: hydrology, soils, historic condition, vegetation cover, adjacent vegetation, and land use. For each variable, a set of suitability scores was developed that indicated the wetland establishment potential for different variable states. Composite suitability scores for individual points on the landscape were determined from the weighted geometric mean of suitability scores for each variable at each point. These composite scores were grouped into five classes and mapped as a wetland mitigation suitability surface with a GIS. Sites with high suitability scores were further evaluated using information on the feasibility of site modification and project cost. This modeling approach could be adapted by planners for use in identifying the suitability of locations as wetland mitigation sites at any site or region.     

改进BP算法在煤与瓦斯突出预测中的应用

为了正确预测煤与瓦斯突出的趋势与危险性 ,基于反向BP神经网络 ,笔者提出了一种改进的BP网络模型 :为了加快BP网络的收敛速度 ,增强其跳出局部极小点的能力 ,采用了自适应变步长法和改进模拟退火法 (SA法 )相结合的方法。实际应用表明 ,该模型收敛速度快 ,准确性高 ,具有较高的可靠性和实用性 ,是一种十分有效的煤与瓦斯突出危险性预测方法。