如何解决大气环境影响预测存在的问题

目前大气环境影响预测存在所需基础数据不真实、预测方法未严格执行导则规范、人为忽略环境影响超标区域等问题。因此,需要通过优化技术复核、开发研究环境预测方法、开展对地方评估中心的技术复核培训和反馈来进一步提高大气环境影响评价的水平。《环境影响评价法》颁布十多年以来,环境影响评价制度在协调我国经济发展与环境保护方面发挥了巨大作用。由于环境影响预测的结论将直     

2株降解菲的植物内生细菌筛选及其降解特性

为了获得具有菲降解特性的植物内生细菌,通过选择性富集培养,本研究从多环芳烃污染区植物体内分离得到2株能够降解液体培养基中高浓度菲(200 mg·L-1)的植物内生细菌(菌株P1和P3).经形态观察、生理生化特征鉴定和16S rDNA序列同源性分析,分别将菌株P1和P3鉴定为寡养单胞菌属(Stenotrophomonas sp.)和假单胞菌属(Pseudomonas sp.)的细菌.菌株P1和P3均为好氧生长,28℃、150 r·min-1摇床培养7 d,2株菌对无机盐培养基中菲(100 mg·L-1)的降解率均高于90%.条件实验表明,温度20～30℃,pH 6.0～8.0,盐含量0%～4%,装液量10～30 mL(100 mL三角瓶)2菌株生长良好且对菲降解率高于70%.其最适生长和降解温度为30℃,pH为7.0,盐含量≤4%,装液量≤30 mL.综合比较2株菌对菲的降解特性,P1菌株高温耐受性稍强,而P3菌株对环境pH改变和缺氧的耐受性稍强.     

修复达标土壤回填对地下水环境影响的层次化评估方法应用研究

以含1,2-二氯乙烷等10种有机物污染土壤异位修复后回填为例,采用层次化方法评估将按原厂址健康风险评价确定的修复目标进行达标修复后的土壤回填对回填区地下水下游700 m处饮用水井水质的影响.第一层次预测结果显示8种污染物在回填土层淋溶液中的浓度将超过评价标准,可能对目标水井水质造成污染.考虑回填区非饱和带土壤的吸附截留进行第二层次评价的结果显示,到达回填区地下水水面处浓度依然超过评价标准的污染物降低至6种,不能排除对目标水井的水质影响.进一步考虑地下水混合稀释进行第三层次评估的结果显示,经地下水混合稀释后,超过评价标准的污染物降低至4种.最后,考虑饱和带吸附截留作用进行第四层次评估的结果显示,目标水井中超过评估标准的污染物仅1种.由此可见,随着评估层次的不断深入,虽然所需开展的工作及获取的场地参数增加,但是污染物预测浓度更接近目标预测点的浓度,需调整修复目标的污染物数量逐渐减少,污染防治成本将逐渐降低.     

以废气为热源生产二水氯化钙的新工艺

针对在氯化法生产钛白粉的过程中产生的大量高热值废气和氯化钙废水,提出以废气为热源生产二水氯化钙的新工艺。以焚烧的方式处理氯化尾气,将产生的热量用于浓缩蒸发氯化钙废水,生产工业级二水氯化钙产品,达到以废治废的目的。不仅处理了工业废气和废水,在节约能源的同时创造了一定的经济效益。     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

OMS-2负载Pt催化剂的制备及其催化氧化性能研究

采用前掺杂法、沉积-沉淀法和浸渍法制备了氧化锰八面体分子筛(OMS-2)负载Pt催化剂(Pt/OMS-2),对所制催化剂进行了结构和织构表征。并研究了不同制备方法和沉积-沉淀法中不同制备(Pt负载量和溶液的pH值)对Pt/OMS-2催化氧化CO性能的影响。结果表明,沉积-沉淀法制备的Pt/OMS-2-DP催化剂活性最好(T100=100℃)。这与Pt/OMS-2-DP催化剂中Pt颗粒大小及OMS-2载体与Pt之间存在强相互作用有关。Pt负载量明显影响Pt/OMS-2-DP催化剂的催化活性,3Pt/OMS-2-DP催化剂(Pt=3.0 wt%)催化活性最高,这是由于适当Pt负载量,Pt颗粒较小,并与载体OMS-2的相互作用较强,能较好地活化OMS-2晶格氧。pH值对Pt/OMS-2-DP催化剂催化性能影响较大,这与OMS-2的等电点和Pt在不同溶液中存在不同Pt配位体形式有关。     

基于单颗粒质谱信息气溶胶分类方法的研究进展

气溶胶质谱仪在对气溶胶颗粒的监测过程中会产生大量单颗粒的化学成分和粒径信息,基于这些质谱数据能够推测颗粒的来源。而对气溶胶来源的分析,很大程度上是由颗粒的种类决定的,故对海量数据的分类就成为不可忽略的步骤。针对气溶胶质谱仪采集到的数据,概述了用于气溶胶分类的多种方法的理论核心、分类步骤及各自的优缺点等。据此可为今后气溶胶分类方法的研究提供建设性意见。     

环境保护验收监测难点及解决方法

根据验收实际工作程序展开,对每个步骤进行简单阐述并提出应注意的问题,对验收工作有一定的参考指导意义.     

取代苯类化合物对斑马鱼急性毒性的QSAR研究

该文基于定量-构效关系(QSAR)原理,研究了26种取代苯类化合物与斑马鱼的48 h急性毒性(-lgLC50)之间的内在定量关系。利用AM1量子化学计算方法,首先计算了8种典型量子化学参数与斑马鱼48 h-lgLC50的相关性;然后通过逐步多元线性回归(MLR)方法建立了取代苯类化合物对斑马鱼48 h-lgLC50的QSAR模型,并对所建模型分别进行了内部验证和外部验证,所得复相关系数R2=0.942;最后利用QSAR模型,分析了取代苯类化合物量子化学参数对斑马鱼48 h-lgLC50的影响。结果表明:正辛醇—水分配系数(LogP)与-lgLC50的相关性最大,负电性[-(L+H)/2]与-lgLC50负相关。所得QSAR模型具有较高的稳定性及预测能力,可以用来预测取代苯类化合物对斑马鱼的急性毒性。