A Critical Assessment of the Use of Surrogate Species in Conservation Planning in the Sacramento‐San Joaquin Delta,California (U.S.A.)

Abstract: Conservation biology has provided wildlife managers with a wealth of concepts and tools for use in conservation planning; among them is the surrogate species concept. Over the past 20 years, a growing body of empirical literature has demonstrated the limited effectiveness of surrogates as management tools, unless it is first established that the target species and surrogate will respond similarly to a given set of environmental conditions. Wildlife managers and policy makers have adopted the surrogate species concept, reflecting the limited information available on most species at risk of extirpation or extinction and constraints on resources available to support conservation efforts. We examined the use of surrogate species, in the form of cross‐taxon response‐indicator species (that is, one species from which data are used to guide management planning for another, distinct species) in the Sacramento‐San Joaquin Delta, California (U.S.A.). In that system there has been increasing reliance on surrogates in conservation planning for species listed under federal or state endangered species acts, although the agencies applying the surrogate species concept did not first validate that the surrogate and target species respond similarly to relevant environmental conditions. During the same period, conservation biologists demonstrated that the surrogate concept is generally unsupported by ecological theory and empirical evidence. Recently developed validation procedures may allow for the productive use of surrogates in conservation planning, but, used without validation, the surrogate species concept is not a reliable planning tool.     

Distribution and contamination assessment of heavy metals in sediment of the Second Songhua River, China

The Second Songhua River was subjected to a large amount of raw or primary effluent from chemical industries in Jilin city in 1960s to 1970s, resulting in serious mercury pollution. However, an understanding of other trace metal pollution has remained unclear. The objective of this study was to investigate trace metal contamination in the sediment of the river. Bottom sediment samples were taken in the river between Jilin city and Haerbin city in 2005. An uncontaminated sediment profile was taken in the Nen River at the same time. Total concentrations of Al, Fe, Mg, Ca, K, Na, Ti, Mn, V, Sc, Co, Cu, Cr, Ni, Pb and Zn in the sediment samples were measured by ICP-MS or ICP-OES, following digestion with various acids. Concentrations of Co, Cu, Cr, Ni, Pb and Zn in the surface sediments were 5.1–14.7, 18.5–78.9, 2.4–75.4, 7.2–29.0, 13.5–124.4, and 21.8–403.1 mg/kg, respectively, generally decreasing along the course of the river from Jilin city to Haerbin city. Background concentrations of trace metals were reconstructed by geochemical normalization to a conservative element scandium. Results showed that concentrations of Co, Cr, and Ni in the sediment were generally only slightly higher than or equal to their background values, while concentrations of Cu, Pb, and Zn in the some sediment samples were significantly higher than their background values. In detail, the sediment at Jilin city was moderately contaminated by Cu, and the sediment of the Second Songhua River was moderately contaminated by Pb and Zn. The top layer (0–10 cm depth) and bottom layers (30–46 cm depth) of one sediment profile at Wukeshu town were generally moderately polluted by Pb and Zn. Synthetically, the surface sediment in the studied river section was classified as natural sediment without ecological risk by the sediment pollution index (SPI) of Cu, Cr, Ni, Pb and Zn. Only the 30–45 cm depth of the sediment profile at Wukeshu town was classified as low polluted sediment by the SPI of these metals, recording a historical contamination of the river in the 1960s to 1970s. This buried contamination of trace metals might pose a potential risk to water column under disturbance of sediment. Foundation item: The National Basic Research Priorities Program of China (2004CB418502)     

Use of Maryland Biological Stream Survey Data to Determine Effects of Agricultural Riparian Buffers on Measures of Biological Stream Health

This study was undertaken to determine the importance of riparian buffers to stream ecology in agricultural areas. The original Maryland Biological Stream Survey (MBSS) data set was partitioned to represent agricultural sites in Maryland's Coastal Plain and Piedmont regions. ANOVA, multiple linear regression (MLR), and CART regression tree models were developed using riparian and site catchment landscape characteristics. MBSS data were both stratified by physiographic region and analyzed as a combined data set. All models indicated that land management at the site was not the controlling factor for fish IBIs (FIBI) at that site and, hence, using FIBI to evaluate site-scale factors would not be a prudent procedure. Measures of instream habitat and location in the stream network were the dominant explanatory factors for FIBI models. Both CART and MLR models indicated that forest buffers were influential on benthic IBIs (BIBI). Explanatory variables reflected instream conditions, adjacent landscape influence, and chemistry in the Coastal Plains sites, all of which are relatively site specific. However, for Piedmont sites, hydrologic factors were important, in addition to adjacent landscape influence, and chemistry. Both Coastal Plain and Piedmont CART models identified several hydrologic factors, emphasizing the dominant control of hydrology on the physical habitat index (PHI). Riparian buffers were a secondary influence on PHI in the Coastal Plain, but not in the Piedmont. Between 40% and 70% of the variation in FIBI, BIBI, and PHI was explained by the “easily obtainable” variables available from the MBSS data set. While these are empirical results specific to Maryland, the general findings are of use to other locations where the establishment of forest buffers is considered as an aquatic ecosystem restoration measure.     

JSEM: A Framework for Identifying and Evaluating Indicators

There are two issues in indicator development that have not been adequately addressed: (1) how to select an optimal combination of potentially redundant indicators that together best represent an endpoint, given cost constraints; (2) how to identify and evaluate indicators when the endpoint is unmeasured. This paper presents an approach to identifying and evaluating combinations of indicators when the mathematical relationships between the indicators and an endpoint may not be quantified, a limitation common to many ecological assessments. The approach uses the framework of Structural Equation Modeling (SEM), which combines path analysis withmeasurement models, to formalize available informationabout potential indicators and to evaluate their potential adequacy for representing an endpoint. Unlike traditional applications of SEM which require data on all variables, our approach – judgement-based SEM (JSEM) – can utilize expert judgement regarding the strengths and shapes of indicator-endpoint relationships. JSEM is applied in two stages. First, a conceptual model that relates variables in a network of direct and indirect linkages is developed, and is used to identify indicators relevant to an endpoint. Second, an index of indicator strength – i.e., the strength of the relationship between the endpoint and a set of indicators – is calculated from estimates of correlation between the modeled variables, and is used to compare alternative sets of indicators. The second stage is most appropriate for large, long-term assessments. Although JSEM is not a statistical technique, basing JSEM on SEM provides a structure for validating the conceptual model and for refining the index of indicator strength as data become available. Our main objective is to contribute to a rigorous and consistent selection of indicators even when knowledgeabout the ability of indicators to represent an endpoint is limited to expert judgement.     

Effectiveness of forestry streamside management zones in the sand-clay hills of Mississippi: early indications

During the past decade, compliance with initiatives to promote forestry best management practices (BMPs) has been monitored in most states of the southern U.S. and suggests an excellent level of acceptance throughout the region. However, effectiveness of these practices to protect water quality and aquatic habitat in streams that are potentially impacted by forest management activities has not been as thoroughly documented as the degree of compliance. The objective of this study was to determine effectiveness of streamside management zones (SMZs), a key element of BMPs designed for protection of water quality, aquatic habitat, and macroinvertebrate communities, in low-order streams within a region of north central Mississippi that is subjected to intensive forest management. Three SMZ treatments (undisturbed reference, clear-cut logging with an SMZ designated by forest managers, or clear-cut logging with no SMZ) were evaluated using a study with three replications of each treatment. Response metrics including water quality parameters, mineral soil exposure and net deposition/erosion within riparian zones, stream habitat indicators, and aquatic macroinvertebrate communities were comparable between streams receiving SMZs and undisturbed reference streams at all sampling intervals during the first year after treatment. Furthermore, significant elevation of streamwater temperature, decline in habitat stability rating, and increase in density of macroinvertebrates occurring in streams without an SMZ in comparison to reference streams provides additional evidence of SMZ effectiveness during the initial year after harvesting.     

PREDICTION OF STREAM TEMPERATURE IN FORESTED WATERSHEDS1

ABSTRACT: Removal of streamside vegetation changes the energy balance of a stream, and hence its temperature. A common approach to mitigating the effects of logging on stream temperature is to require establishment of buffer zones along stream corridors. A simple energy balance model is described for prediction of stream temperature in forested headwater watersheds that allows evaluation of the performance of such measures. The model is designed for application to “worst case” or maximum annual stream temperature, under low flow conditions with maximum annual solar radiation and air temperature. Low flows are estimated via a regional regression equation with independent variables readily accessible from GIS databases. Testing of the energy balance model was performed using field data for mostly forested basins on both the west and east slopes of the Cascade Mountains, and was then evaluated using the regional equations for low flow and observed maximum reach temperatures in three different east slope Cascades catchments. A series of sensitivity analyses showed that increasing the buffer width beyond 30 meters did not significantly decrease stream temperatures, and that other vegetation parameters such as leaf area index, average tree height, and to a lesser extent streamside vegetation buffer width, more strongly affected maximum stream temperatures.     

A Side‐by‐Side Comparison of Pervious Concrete and Porous Asphalt1

Welker, Andrea L., James D. Barbis, and Patrick A. Jeffers, 2012. A Side‐by‐Side Comparison of Pervious Concrete and Porous Asphalt. Journal of the American Water Resources Association (JAWRA) 48(4): 809‐819. DOI: 10.1111/j.1752‐1688.2012.00654.x Abstract: This article compares the performance of two permeable pavements, pervious concrete and porous asphalt, that were installed side‐by‐side in fall 2007. Because the pavements are located directly adjacent to one another, they experience the same vehicle loads, precipitation, and pollution loads. These permeable pavements are part of an infiltration stormwater control measure (SCM). This article focuses on the comparison of water quality parameters, maintenance and durability, and user perception. Eleven different water quality parameters were analyzed at this site for 19 different storm events over a one year period: pH, conductivity, total suspended solids, chlorides, total nitrogen, total phosphorus, total dissolved copper, total dissolved lead, total dissolved cadmium, total dissolved chromium, and total dissolved zinc. Results from the two pavement types were compared using the Mann–Whitney U‐test. The only parameter that was found to be statistically different between the two pavements was pH. Periodic inspection of the two pavement types indicated that after two years of use both pavements were wearing well. However, there was some evidence of clogging of both pavements and some evidence of surface wear. A survey of users of the lot indicated that the perception of these permeable pavements was favorable.     

MANAGING TAIWAN'S RESERVOIR WATERSHEDS BY THE ZONING APPROACH1

ABSTRACT: For many years, a commonly used strategy for source water protection in Taiwan has been setting up arbitrary, fixed‐width buffer zones near sensitive waters, such as water‐supply reservoirs, and prohibiting any development in their watersheds. However, such regulations are now often viewed as infringing by the government on landowners' property rights, a situation that has led to citizen protests. This paper describes a proposed strategy that is water‐quality based and uses a quantitative zoning approach. A reservoir's watershed is divided into several zones beginning from the normal water line to the divide. Different levels of best management practices (BMPs) are required for controlling runoff pollution in different zones. The layout of the management zones is based on a number of factors such as reservoir classification, water quality conditions, and physical characteristics of the watershed. The goal of promoting such an approach is to try to balance the needs of watershed development and water quality protection. A case study using the Tapu Reservoir Watershed in Northern Taiwan as an example for illustrating the proposed zoning approach is presented.     

BMP IMPACTS ON WATERSHED RUNOFF,SEDIMENT, AND NUTRIENT YIELDS1

ABSTRACT: To quantify the effectiveness of best management practice (BMP) implementation on runoff, sediment, and nutrient yields from a watershed, the Nomini Creek watershed and water quality monitoring project was initiated in 1985, in Westmoreland County, Virginia. The changes in nonpoint source (NPS) loadings resulting from BMPs were evaluated by comparing selected parameters from data series obtained before, during, and after periods of BMP implementation. The results indicated that the watershed-averaged curve number, sediment, and nutrient (N and P) concentrations were reduced by approximately 5, 20, and 40 percent, respectively, due to BMP implementation. The nutrient yield model developed by Frere et al. (1980) was applied to the water quality parameters from 175 storms, but it failed to adequately describe the observed phenomena. Seasonal changes in nutrient availability factors were not consistent with field conditions, nor were they significantly different in the pm- and post-BMP periods. An extended period of monitoring, with intensive BMP implementation over a larger portion of the watershed, is required to identify BMP effectiveness.