Oxidation of diesel soot on binary oxide CuCr(Co)-based monoliths

Binary oxide systems (CuCr₂O₄, CuCo₂O₄), deposited onto cordierite monoliths of honeycomb structure with a second support (finely dispersed Al₂O₃), were prepared as filters for catalytic combustion of diesel soot using internal combustion engine's gas exhausts (O₂, NO_x, H₂O, CO₂) and O₃ as oxidizing agents. It is shown that the second support increases soot capacity of aforementioned filters, and causes dispersion of the particles of spinel phases as active components enhancing thereby catalyst activity and selectivity of soot combustion to CO₂. Oxidants used can be arranged with reference to decreasing their activity in a following series: O₃ ? NO₂ > H₂O > NO > O₂ > CO₂. Ozone proved to be the most efficient oxidizing agent: the diesel soot combustion by O₃ occurs intensively (in the presence of copper chromite based catalyst) even at closing to ambient temperatures. Results obtained give a basis for the conclusion that using a catalytic coating on soot filters in the form of aforementioned binary oxide systems and ozone as the initiator of the oxidation processes is a promising approach in solving the problem of comprehensive purification of automotive exhaust gases at relatively low temperatures, known as the “cold start” problem.     

Oxidation of diesel soot on binary oxide CuCr(Co)-based monoliths

Binary oxide systems(Cu Cr2O4, Cu Co2O4), deposited onto cordierite monoliths of honeycomb structure with a second support(finely dispersed Al2O3), were prepared as filters for catalytic combustion of diesel soot using internal combustion engine’s gas exhausts(O2, NOx, H2 O, CO2) and O3 as oxidizing agents. It is shown that the second support increases soot capacity of aforementioned filters, and causes dispersion of the particles of spinel phases as active components enhancing thereby catalyst activity and selectivity of soot combustion to CO2. Oxidants used can be arranged with reference to decreasing their activity in a following series: O3 NO2> H2 O > NO > O2> CO2. Ozone proved to be the most efficient oxidizing agent: the diesel soot combustion by O3 occurs intensively(in the presence of copper chromite based catalyst) even at closing to ambient temperatures.Results obtained give a basis for the conclusion that using a catalytic coating on soot filters in the form of aforementioned binary oxide systems and ozone as the initiator of the oxidation processes is a promising approach in solving the problem of comprehensive purification of automotive exhaust gases at relatively low temperatures, known as the "cold start" problem.     

Two‐Stage Ditch Floodplains Enhance N‐Removal Capacity and Reduce Turbidity and Dissolved P in Agricultural Streams

Two‐stage ditches represent an emerging management strategy in artificially drained agricultural landscapes that mimics natural floodplains and has the potential to improve water quality. We assessed the potential for the two‐stage ditch to reduce sediment and nutrient export by measuring water column turbidity, nitrate (NO₃^?), ammonium (NH₄⁺), and soluble reactive phosphorus (SRP) concentrations, and denitrification rates. During 2009‐2010, we compared reaches with two‐stage floodplains to upstream reaches with conventional trapezoid design in six agricultural streams. At base flow, these short two‐stage reaches (<600 m) reduced SRP concentrations by 3‐53%, but did not significantly reduce NO₃^? concentrations due to very high NO₃^? loads. The two‐stage also decreased turbidity by 15‐82%, suggesting reduced suspended sediment export during floodplain inundation. Reach‐scale N‐removal increased 3‐24 fold during inundation due to increased bioreactive surface area with high floodplain denitrification rates. Inundation frequency varied with bench height, with lower benches being flooded more frequently, resulting in higher annual N‐removal. We also found both soil organic matter and denitrification rates were higher on older floodplains. Finally, influence of the two‐stage varied among streams and years due to variation in stream discharge, nutrient loads, and denitrification rates, which should be considered during implementation to optimize potential water quality benefits.     

Reducing Nitrogen Export from the Corn Belt to the Gulf of Mexico: Agricultural Strategies for Remediating Hypoxia

SPAtially Referenced Regression on Watershed models developed for the Upper Midwest were used to help evaluate the nitrogen‐load reductions likely to be achieved by a variety of agricultural conservation practices in the Upper Mississippi‐Ohio River Basin (UMORB) and to compare these reductions to the 45% nitrogen‐load reduction proposed to remediate hypoxia in the Gulf of Mexico (GoM). Our results indicate that nitrogen‐management practices (improved fertilizer management and cover crops) fall short of achieving this goal, even if adopted on all cropland in the region. The goal of a 45% decrease in loads to the GoM can only be achieved through the coupling of nitrogen‐management practices with innovative nitrogen‐removal practices such as tile‐drainage treatment wetlands, drainage–ditch enhancements, stream‐channel restoration, and floodplain reconnection. Combining nitrogen‐management practices with nitrogen‐removal practices can dramatically reduce nutrient export from agricultural landscapes while minimizing impacts to agricultural production. With this approach, it may be possible to meet the 45% nutrient reduction goal while converting less than 1% of cropland in the UMORB to nitrogen‐removal practices. Conservationists, policy makers, and agricultural producers seeking a workable strategy to reduce nitrogen export from the Corn Belt will need to consider a combination of nitrogen‐management practices at the field scale and diverse nitrogen‐removal practices at the landscape scale.     

Guidelines for Riparian Vegetative Shade Restoration Based Upon a Theoretical Shaded‐Stream Model1

Abstract: Guidelines for riparian vegetative shade restoration were developed using a theoretical model of total daily radiation received by a shaded stream. The model assumed stream shading by nontransmitting, vertical or overhanging, solid vegetation planes in infinitely long reaches. Radiation components considered in the model were direct beam shortwave on the stream centerline, diffuse atmospheric shortwave, shortwave reflected by vegetation, atmospheric longwave, and longwave emitted by vegetation. Potential or extraterrestrial shortwave irradiation theory was used to compute beam shortwave radiation received at the stream centerline, and view factor theory was used to compute diffuse radiation exchange among stream, vegetation, and atmospheric planes. Model shade effects under clear skies were dominated by reductions in receipt of direct beam shortwave radiation. Model shade effects with cloudy skies were dominated by the “view factor effect” or the decreases in diffuse shortwave and longwave radiation from the atmosphere balanced against increases in longwave radiation from vegetation. Model shade effects on shortwave radiation reflected by vegetation were found to be negligible. The model was used to determine the vegetation height (H) to stream width (W) ratios needed to achieve 50, 75, and 90 % shade restoration for mid‐latitude conditions on clear and cloudy days. Ratios of vegetation height to stream width, for dense nontransmitting vegetation, generally ranged from 1.4 to 2.3 for 75% shade restoration at a mid‐latitude site (40°N). The model was used to show H/W needed for E‐W vs. N‐S stream azimuths, varying stream latitudes between 30° and 50°N, channels with overhanging vegetation, channels undergoing width changes, as well as the limits to shade restoration on very wide channels.     

APPLICATIONS OF FUZZY LOGIC IN THE DESIGN OF VEGETATED WATERWAYS UNDER UNCERTAINTY1

ABSTRACT: Two methods for analyzing uncertainty are described and compared in terms of their applicability for designing vegetated waterways. The first approach uses First and Second Order Analysis and the second employs Fuzzy Logic. The two methods were used to evaluate the uncertain parameters in the Manning formula, which is used for calculating the velocity of water flow in vegetated channels. Results indicate that both approaches can provide the designer with an indication of reliability of the estimates, a way of selecting a design option which meets a specified probability of success, as well as a means of comparing the relative importance of uncertainty in various input parameters. Also, the two methods have the common advantage of being simple and requiring less data about the uncertain parameters compared to the more comprehensive stochastic approaches. Although the Fuzzy Logic approach appears to provide a more conservative design because of its slightly higher variance, compared with the First and Second Order Analysis, both methods have proven to be reliable and suitable to deal with uncertainty.     

Is Denser Greener? An Evaluation of Higher Density Development as an Urban Stormwater‐Quality Best Management Practice1

Abstract: A simple spreadsheet model was used to evaluate potential water quality benefits of high‐density development. The question was whether the reduced land consumed by higher density development (vs. standard suburban developments) would offset the worse water quality generated by a greater amount of impervious surface in the smaller area. Total runoff volume and per acre loadings of total phosphorous, total nitrogen, and total suspended solids increased with density as expected, but per capita loadings and runoff decreased markedly with density. For a constant or given population, then, higher density can result in dramatically lower total loadings than more diffuse suburban densities. The model showed that a simple doubling of standard suburban densities [to 8 dwelling units per acre (DUA) from about 3 to 5 DUA] in most cases could do more to reduce contaminant loadings associated with urban growth than many traditional stormwater best management practices (BMPs), and that higher densities such as those associated with transit‐oriented development could outperform almost all traditional BMPs, in terms of reduced loadings per a constant population. Because higher density is associated with vibrant urban life, building a better city may be the best BMP to mitigate the water quality damage that will accompany the massive urban growth expected for the next several decades.     

HABITAT AND FISH RESPONSES TO MULTIPLE AGRICULTURAL BEST MANAGEMENT PRACTICES IN A WARM WATER STREAM1

ABSTRACT: Thirteen years of annual habitat and fish sampling were used to evaluate the response of a small warm water stream in eastern Wisconsin to agricultural best management practices (BMPs). Stream physical habitat and fish communities were sampled in multiple reference and treatment stations before, during, and after upland and riparian BMP implementation in the Otter Creek subwatershed of the Sheboygan River watershed. Habitat and fish community measures varied substantially among years, and varied more at stations that had low habitat diversity, reinforcing the notion that the detection of stream responses to BMP implementation requires long term sampling. Best management practices increased substrate size; reduced sediment depth, embeddedness, and bank erosion; and improved overall habitat quality at stations where a natural vegetative buffer existed or streambank fencing was installed as a riparian BMP. There were lesser improvements at locations where only upland BMPs were implemented. Despite the habitat changes, we could not detect significant improvements in fish communities. It is speculated that the species needed to improve the fish community, mainly pollution intolerant species, suckers (Castomidae), and darters (Percidae), had been largely eliminated from the Sheboygan River watershed by broadscale agricultural nonpoint source pollution and could not colonize Otter Creek, even though habitat conditions may have been suitable.     

Chemical leasing: cooperative business models for sustainable chemicals management. Summary of research projects commissioned by the Austrian Federal Ministry of Agriculture, Forestry, Environment and Water Management

- Sustainable chemistry - Section editors: Klaus Günter Steinhäuser, Steffi Richter, Petra Greiner, Jutta Penning, Michael AngrickBackground, Aim and Scope Chemicals play a vital role in the day-to-day life of industrialised societies. Their use is not restricted to the chemical enterprises per se, but is a crucial part of production processes in a lot of industrial sectors. Traditional instruments of environmental policy (such as bans, restrictions) can only deal with the most hazardous substances. The Johannesburg Implementation Plan of 2002 calls for more sustainable patterns of production and consumption, and sets the year of 2020 as a goal to use chemicals in a way that human health and the environment are not endangered. Political instruments should not only gather more knowledge about the properties of chemicals, but should also stimulate the environmentally sound use of chemicals. Existing business models should therefore be reviewed in relation to this strategic approach to encourage marketing options with respect to the environmental focus.Main Features Business models were examined for their effects on the consumption of chemicals and amount of waste emissions in relation to their economic potential. Different possibilities for cooperation of supplier, user and disposal companies were elaborated and examined with a view to the specific situation in Austria.Results and Discussion A range of cooperative models – summarised under the term ‘chemical leasing’ - was identified, which can contribute to a more efficient use of resources. 12 main possible application areas (cleaning, lubrication, paint stripping and others) have been identified in Austria. If chemical leasing models were applied in these areas, the amounts of chemicals currently used could be reduced by one third (53,000 tonnes per year). Cost reductions of up to 15 % can be expected.Conclusion The application of chemical leasing models can contribute considerably to achieving more sustainable and resource-efficient patterns of production. The Austrian Ministry for Environment has therefore decided to subsidise the further practical implementation of these new service-oriented business models. Pilot projects in 4 enterprises, which are supervised by consulting companies, are currently being carried out. Recommendation and Outlook The experiences of the pilot projects will serve as valuable building blocks for the wider use of chemical leasing models. Furthermore, the UNIDO Cleaner Production Centres have expressed their clear interest and will examine the possibility to use chemical leasing as a part of their Cleaner Production Programmes.