Hot Steam Transfer Through Heat Protective Clothing Layers

The aim of this study was to analyse the transfer of steam through different types of textile layers as a function of sample parameters such as thickness and permeability. In order to simulate the human body, a cylinder releasing defined amounts of moisture was also used. The influence of sweating on heat and mass transfer was assessed.

The results show that in general impermeable materials offer better protection against hot steam than semi-permeable ones. The transfer of steam depended on the water vapour permeability of the samples, but also on their thermal insulation and their thickness. Increasing the thickness of the samples with a spacer gave a larger increase in protection with the impermeable samples compared to semi-permeable materials. Measurements with pre-wetted samples showed a reduction in steam protection in any case. On the other hand, the measurements with a sweating cylinder showed a beneficial effect of sweating.     

Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Occupational Health and Social Resources

There is a relationship between the changes in work-related diseases and the following factors: the transformation of the organization of work, organizational development, as well as human and social changes in the work environment. These factors also influence the maintenance of industrial health and safety standards at work. Safety technology will continue to be important, but will be reduced in significance compared to the so-called soft factors, that is, all dimensions and parameters affecting people’s health and social environment at the work place.

It seems that in the future the relationship between the social resource development and work protection will become more relevant. Social resource development influences the quality of work performance and motivation, the quality of work and work protection, the likelihood of accidents and breakdowns, and the level of self-control and capacity of change.

The consequences of work protection research will be discussed in this article with a focus on the contribution of social sciences.     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

Child Abuse Investigation: Police Officers and Secondary Traumatic Stress

Child protection is an area of police work which has expanded in the last decade, leading to an increase in the number of police officers working in departments which specialise in investigating cases of child abuse. Police officers in this field may be at greater risk of experiencing secondary traumatic stress but there remains a paucity of research in this area of policing. Analogies can be drawn to existing research in policing and with social service workers involved in child protection. The paper finishes off with implications for police forces to ensure safe working environments and appropriate counselling for employees.     

Protection Against Dust by Respirators

This article is a brief review of the mechanism of action of fibrous filters and of the performance of respirators; it neglects many of the complications discussed in longer and more detailed articles. An expression is given for the pressure drop across a filter in terms of fibre diameter and filtration velocity. The particle capture mechanisms of interception and diffusional deposition are introduced and the way in which filtration efficiency varies with particle size is discussed. Filters with fibres of small diameter are shown to be the most efficient, but their use can cause problems. Electrically charged materials are widely used in respirators because of their high efficiency and low pressure drop. Types of material, their means of charging, and their method of action are described. An account is given of respirator leakage, the protection factor, and of the way that these may vary in a period of use. The leakage of air and particles through face seal leaks and leaky valves is discussed. The frequent discrepancy in the protection given by respirators in the workplace, on the one hand, and that suggested by laboratory measurements, on the other, is reviewed, and the article ends with an account of the combined effect of aerosol penetration through a filter and through a leak.     

五店市历史传统街区建筑群防火间距研究

针对执行现行消防技术标准与保留传统建筑风貌的矛盾,以晋江五店市传统街区为对象,采用数值模拟方法研究不同楼间距对相邻建筑所受火灾辐射热流的影响规律,对街区内的典型建筑防火间距进行重新评估,使其既满足历史街区风貌保护要求,又能达到预防火灾的目的。     

宜兴煤矿安全经济护巷煤柱宽度的研究确定

为节省资源,留最窄护巷煤柱,在借用FLAC3D模拟软件掌握不同护巷煤柱宽度下巷道围岩应力应变后,结合模拟的结果和实验室试验新材料GRT-201加固后的煤岩体强度指标,最终确定煤柱留设宽度为2m,较正常煤柱宽度留设减小了20多米.现场操作后巷道的变形率控制在5％以内,大大降低留设煤柱宽度的同时保证了工作面的正常接替和安全回采.