制备条件及水中常见离子对Pd-Cu／AC催化还原去除硝酸盐的影响

以浸渍法制备Pd—Cu／AC催化剂,以氢气为还原剂对催化还原硝酸盐进行研究,考察了制备条件及水中常见离子对催化还原的影响。结果表明,在200～500℃、30—240min焙烧条件下,适宜的焙烧温度为300℃,时间为2h;在100～300W,1～5min的微波条件下,微波功率引起的催化剂活性变化比微波照射时间显著,微波处理综合效应不利于催化性能的提高。活性炭经0．01～0．1mol／LEDTA处理后催化剂的活性随EDTA浓度增加,氨氮生成率没有明显变化。反应过程中氨氮的生成受No;的浓度影响明显,较高N2-浓度有利于选择性的提高。在初始NO3^-浓度100mg／L的条件下,Pd—Cu／AC催化还原硝酸盐的反应为一级反应。水中共存离子影响研究表明,CO3^2-、HCO／的存在不仅会硝酸盐的去除效率明显降低,同时导致氨氮生成率明显增加,S^2-存在使催化剂中毒,催化效率极低,Cl^-、SO4^2-的存在对硝酸盐的去除影响较小;水中阳离子存在时催化活性大小顺序为K＋〈Na＋〈Ca^2＋〈Mg^2＋〈Al^2＋,氨氮的生成率大小顺序为K^＋〉Na^＋〉Ca^2＋〉Mg^2＋〉Al^2＋。     

COMPARISON BETWEEN SOLID–PHASE EXTRACTION METHODS FOR THE CHROMATOGRAPHIC DETERMINATION OF ORGANOPHOSPHORUS PESTICIDES IN WATER

A solid-phase microextraction (SPME) procedure has been developed to ex tract eight organophosphorus pesticides (OPs) in water and the method was compared with a conventional solid phase extraction (SPE) technique. The extracted OPs were analyzed by gas chromatography using thermionic specific detection. Both extraction methods presented linear calibration at least over the concentration range investigated (100 to 1000 ng.mL^?1 for SPE and 1 to 100 ng.mL^?1 for SPME). SPME method presented higher sensitivity than SPE. The quantitation limits were between 0.1 to 1.0 ng.mL^?1 for SPME depending upon the analyte, and 100 ng.mL^?1 for SPE. The precision, as measured by the standard deviations (RSD), were in the range 3.6 % to 5.8 % for SPME and 2.4 % to 9.2 % for SPE.

Along with the feature of being a solvent – free sampling technique, SPME offers additional benefits due to its high sensitivity, simplicity, and small size sample required (typically: SPE – 500 mL, SPME – 5 mL).     

TiO_2/AC复合催化剂的制备及其对六氯苯的光催化降解性能研究

以颗粒活性炭（AC）和钛酸丁酯为原料,采用微波辐射法制备TiO2/AC复合光催化剂,并对制备的催化剂进行了表征;采用该催化剂对六氯苯进行光催化降解,确定了六氯苯降解的最佳工艺条件,并就几种外加试剂对TiO2/AC光催化降解六氯苯的强化作用进行了探讨。结果表明,制备的催化剂中TiO2均匀分布在活性炭表面、呈单一的锐钛矿晶型,晶粒生长完善。该催化剂催化降解六氯苯的最佳工艺条件为：pH值为5、TiO2负载量为18.2%、TiO2/AC投加量为0.4 g/L、反应时间为60 min。在此条件下,六氯苯降解效率达90.3%。添加适量的H2O2、AgNO3、K2S2O8、KIO4和KMnO4均能提高TiO2/活性炭对六氯苯的光催化降解效率。5种外加试剂的适宜添加量分别为0.3%、1.0、1.0、0.1和0.1 mmol/L,对TiO2/AC光催化效率的强化作用大小顺序为：H2O2〉AgNO3〉K2S2O8〉KMnO4〉KIO4。     

固定化Lysinibacilluscresolivorans的PVA-SA-PHB-AC复合载体制备及间甲酚的降解

针对生物降解过程容易受到外界不利环境影响及低浓度下动力学效率不高的问题,制备了具有吸附功能的微生物固定化载体并研究了对间甲酚的降解.在聚乙烯醇(polyvinyl alcohol,PVA)固定化载体中加入海藻酸钠(sodium alginate,SA)、聚羟基丁酸酯(poly-3-hydroxybutyrate,PHB)和粉末活性炭(activated carbon,AC),采用循环冷冻-解冻结合硼酸法制备了具吸附功能的PVA-SA-PHB-AC复合载体,并用其包埋固定化1株间甲酚优势降解菌Lysinibacillus cresolivorans,考察了载体微观结构、稳定性及扩散性对固定化微生物降解间甲酚的影响.结果表明,PVA-SA-PHB-AC载体比表面积和平均孔径分别为15.30m2.g-1和33.68 nm,对间甲酚的吸附容量和扩散系数分别为3.86 mg.g-1和5.62×10-8m2.min-1,可稳定使用60 d以上;固定化L.cresolivorans的间甲酚去除为吸附-降解的耦合,去除速率由载体传质速率与微生物降解速率共同决定,间甲酚浓度低于350 mg.L-1时,载体传质速率小于微生物降解速率,间甲酚去除速率由传质速率决定,浓度高于380 mg.L-1时相反;添加了吸附剂的载体扩散系数会减小,但能耐受更高的底物浓度,且在更宽的浓度范围可以实现高效的降解作用.间甲酚的降解规律及其差异性显示出经吸附功能改性的载体因传质作用的加强而实现反应动力学的提高,并且存在一个合理的浓度区间.     

Using Public–Private Interplay to Climate-Proof Urban Planning? Critical Lessons from Developing a new Housing District in Karlstad,Sweden

While strengthening public–private interplay is expected to improve the climate profile of urban planning in terms of mitigation and adaptation, less is known about the practice of such new interactive modes of governing. The paper critically examines the role, benefits and limitations of extended public–private interplay in developing a new housing district in Sweden. The developer dialogue between municipal officials and property developers confirms mutual interests, shared understandings and the added value of interacting. However, the closer the dialogue comes to settling agreements, the more difficult it gets for municipal officials to steer the process and its outcomes in favor of climate proofing. Complications with adapting to the new interactive setting means that municipal officials balance between acting as facilitators and/or regulators and property developers between acting as partners, competitors and/or defenders. Refining steering-strategies for sustaining commitments and securing formal agreements are pertinent for using public–private interplay to climate-proof urban planning.     

Effects of howler monkey reintroduction on ecological interactions and processes

Rewilding has been an increasingly popular tool to restore plant–animal interactions and ecological processes impaired by defaunation. However, the reestablishment of such processes has seldom been assessed. We investigated the restoration of ecological interactions following the reintroduction of the brown howler monkey (Alouatta guariba) to a defaunated Atlantic forest site. We expected the reintroduction to restore plant–animal interactions and interactions between howlers and dung beetles, which promote secondary seed dispersal. We estimated the number of interactions expected to be restored by the reintroduction to provide the baseline interaction richness that could be restored. We followed the reintroduced howler monkeys twice a week for 24 months (337 hours total) to assess their diet. We used howler monkey dung in secondary seed dispersal experiments with 2484 seed mimics to estimate the removal rates by dung beetles and collected the beetles to assess community attributes. We compared the potential future contribution of howler monkeys and other frugivores to seed dispersal based on the seed sizes they disperse in other areas where they occur. In 2 years, howler monkeys consumed 60 animal-dispersed plant species out of the 330 estimated. Twenty-one dung beetle species were attracted to experimentally provided dung; most of them were tunnelers, nocturnal, and large-sized (>10 mm). On average 30% (range 0–100%) of the large seed mimics (14 mm) were moved by dung beetles. About 91% of the species consumed by howlers (size range 0.3–34.3 mm) overlapped in seed size with those removed by dung beetles. In our study area, howler monkeys may consume more large-seeded fruit species than most other frugivores, highlighting their potential to affect forest regeneration. Our results show reintroductions may effectively restore ecological links and enhance ecological processes.     

Determination of propineb and its metabolites propylenethiourea and propylenediamine in banana and soil using gas chromatography with flame photometric detection and LC–MS/MS analysis

A sensitive and specific method for the determination of propineb and its metabolites, propylenethiourea (PTU) and propylenediamine (PDA), using gas chromatography with flame photometric detection (GC-FPD) and LC–MS/MS was developed and validated. Propineb and its metabolite residue dynamics in supervised field trials under Good Agricultural Practice (GAP) conditions in banana and soil were studied. Recovery of propineb (as CS₂), PDA and PTU ranged from 75.3 to 115.4% with RSD (n = 5) of 1.3–11.1%. The limit of quantification (LOQ) of CS₂, PDA and PTU ranged from 0.005 to 0.01 mg kg^?1, and the limit of detection (LOD) ranged from 0.0015 to 0.0033 mg kg^?1. Dissipation experiments showed that the half-life of propineb in banana and soil ranged from 4.4 to 13.3 days. PTU was found in banana with a half-life of 31.5–69.3 days, while levels of PDA were less than 0.01 mg kg^?1 in banana and soil. It has been suggested that PTU is the major metabolite of propineb in banana. The method was demonstrated to be reliable and sensitive for the routine monitoring of propineb and its metabolites in banana and soil. It also serves as a reference for the detection and monitoring of dithiocarbamates (DTCs) residues and the evaluation of their metabolic pathway.     

埋地石油管道交流腐蚀风险等级评估

随着我国现代化进程的加快,管道建设与电力设施的建设呈现出高速发展的局面.然而,高压交流、直流电力设施对埋地管道存在着严重的干扰腐蚀情况.采用正交实验的方法,重点关注交流腐蚀对埋地管道的影响因素,并得出其相互间的数学关系,然后综合腐蚀机理以及正交实验结果,通过正交实验的筛选过程确定主要因素、次要因素以及影响较小的因素,选择合理的指标,运用故障树分析、专家咨询以及二手资料的分析法,并参考国内外的研究现状,全面吸收、归纳、重组、增删现有的评价指标,建立埋地管道交流腐蚀风险等级评估指标体系,运用模糊数学综合评价的方法全面系统的评估交流腐蚀风险等级,从而为埋地管道的安全管理提供可靠的数据.     

Ti/SnO2-RuO2-Sb电极电氧化处理五氯苯酚模拟废水研究

采用刷涂-热解法制备了Sb、Ru掺杂的Ti/SnO2电极。通过SEM、EDX、XRD和循环伏安扫描(CV)表征了电极表面形态、组成、结构和电化学性质,并通过正交试验考察了电催化氧化降解五氯苯酚的影响因素。结果表明,各因素对五氯苯酚转化率影响的大小顺序依次为:底物初始质量浓度、反应温度、反应时间、电流密度、初始溶液pH值。在底物质量浓度为50mg.L-1,反应温度50℃,反应时间180min,电流密度40mA.cm-2,溶液初始pH值为8的条件下五氯苯酚的转化率达到97.6%。     

Investigation of mercury (II) adsorption from aqueous solution onto copper oxide nanoparticles: Optimization using response surface methodology

Response surface methodology was practicable to optimize the mercury (II) removal using copper oxide nanoparticles in an aqueous matrice. The copper oxide nanoparticles structure was performed by TEM, SEM, XRD and BET. The experiment reactions were carried out based on a Box–Behnken design (BBD) and evaluated using RSM. Batch mode tests were conducted to prognosticate the adsorption equilibrium. The three parameters influence on the mercury removal was inquired by a response surface methodological approach. In study, influence of adsorbent dose, pH and temperature on the mercury removal unto copper oxide nanoparticles has been performed. The importance of the independent factors and their interactions were investigated by the ANOVA. The optimum pH, adsorbent dose and temperature were obtained to be 9.0, 0.05 g and 278 K, respectively.