Variations in δ13C of water–soluble leaf and phloem organic matter of Platycladus orientalis: influences of photosynthetic and post–photosynthetic fractionation

Analysis of variations in water–soluble organic matter (WSOM) δ¹³C of leaves and phloem can efficiently describe the δ¹³C distributions within plants and identify the temporal variation of δ¹³C. In this study, WSOM δ¹³C values of both leaves and phloem (twig, stem, and root) of Platycladus orientalis were measured during seven sunny days, including 2–hour interval measurements at three days for diel pattern analysis and 6–hour interval measurements at the remaining four days for day–to–day variation analysis. Analysis of WSOM δ¹³C in different plant organs showed that ¹³C was generally depleted from leaves to twigs, then enriched in stems and subsequently depleted in roots. Stems were significantly ¹³C–enriched compared to twigs (p?<?0.05), while δ¹³C differences between stems and other organs and among leaves, twigs and roots were not significant (p?>?0.05). No clear diel patterns in δ¹³C of leaves and phloem were found. Daily average δ¹³C values indicated that all plant organs had more positive values on sunny days during the dry season than during the wet season. Both photosynthetic and post–photosynthetic fractionation influence variations in WSOM δ¹³C. These results have implications for research on plant physiology and plant water use.     

The effect of clay catalyst on the chemical composition of bio-oil obtained by co-pyrolysis of cellulose and polyethylene

Cellulose/polyethylene (CPE) mixture 3:1, w/w with and without three clay catalysts (K10 – montmorillonite K10, KSF – montmorillonite KSF, B – Bentonite) addition were subjected to pyrolysis at temperatures 400, 450 and 500 °C with heating rate of 100 °C/s to produce bio-oil with high yield. The pyrolytic oil yield was in the range of 41.3–79.5 wt% depending on the temperature, the type and the amount of catalyst. The non-catalytic fast pyrolysis at 500 °C gives the highest yield of bio-oil (79.5 wt%). The higher temperature of catalytic pyrolysis of cellulose/polyethylene mixture the higher yield of bio-oil is. Contrarily, increasing amount of montmorillonite results in significant, almost linear decrease in bio-oil yield followed by a significant increase of gas yield. The addition of clay catalysts to CPE mixture has a various influence on the distribution of bio-oil components. The addition of montmorillonite K10 to cellulose/polyethylene mixture promotes the deepest conversion of polyethylene and cellulose. Additionally, more saturated than unsaturated hydrocarbons are present in resultant bio-oils. The proportion of liquid hydrocarbons is the highest when a montmorillonite K10 is acting as a catalyst.     

Effluents from MBT plants: Plasma techniques for the treatment of VOCs

Mechanical–biological treatments (MBTs) of urban waste are growing in popularity in many European countries. Recent studies pointed out that their contribution in terms of volatile organic compounds (VOCs) and other air pollutants is not negligible. Compared to classical removal technologies, non-thermal plasmas (NTP) showed better performances and low energy consumption when applied to treat lowly concentrated streams. Therefore, to study the feasibility of the application of NTP to MBTs, a Dielectric Barrier Discharge reactor was applied to treat a mixture of air and methyl ethyl ketone (MEK), to simulate emissions from MBTs. The removal efficiency of MEK was linearly dependent upon time, power and specific input energy. Only 2–4% of MEK was converted to carbon dioxide (CO₂), the remaining carbon being involved in the formation of byproducts (methyl nitrate and 2,3-butanedione, especially). For future development of pilot-scale reactors, acting on residence time, power, convective flow and catalysts will help finding a compromise between energy consumption, desired abatement and selectivity to CO₂.     

Effective dialogue: Enhanced public engagement as a legitimising tool for municipal waste management decision-making

The complexity of municipal waste management decision-making has increased in recent years, accompanied by growing scrutiny from stakeholders, including local communities. This complexity reflects a socio-technical framing of the risks and social impacts associated with selecting technologies and sites for waste treatment and disposal facilities. Consequently there is growing pressure on local authorities for stakeholders (including communities) to be given an early opportunity to shape local waste policy in order to encourage swift planning, development and acceptance of the technologies needed to meet statutory targets to divert waste from landfill. This paper presents findings from a research project that explored the use of analytical–deliberative processes as a legitimising tool for waste management decision-making. Adopting a mixed methods approach, the study revealed that communicating the practical benefits of more inclusive forms of engagement is proving difficult even though planning and policy delays are hindering development and implementation of waste management infrastructure. Adopting analytical–deliberative processes at a more strategic level will require local authorities and practitioners to demonstrate how expert-citizen deliberations may foster progress in resolving controversial issues, through change in individuals, communities and institutions. The findings suggest that a significant shift in culture will be necessary for local authorities to realise the potential of more inclusive decision processes. This calls for political actors and civic society to collaborate in institutionalising public involvement in both strategic and local planning structures.     

Influence of inoculating earthworms on removal of pyrene in soils growing Festuca arundinacea

ABSTRACT

The aim of this study was to examine the potential of inoculating earthworms (Pheretima sp.) in order to enhance phytoremediation of polycyclic aromatic hydrocarbons (PAH) present in soils with the use of tall fescue (Festuca arundinacea). In particular, experiments with or without inoculating earthworms for removal of pyrene was investigated. Results showed that planting of F. arundinacea enhanced the removal of pyrene at initial content over 70 days approximately 54%–80% but only 12%–24% occurred in non-planted soils. After inoculating earthworms, the dissipation rates of pyrene in planted soils were increased up to 61%–86%, which was 6%–12% higher than those in corresponding soils without inoculating earthworms. Among all possible pathways, the contribution of plant--microbial interactions on removal of pyrene was predominant, either with (46%) or without inoculating earthworms (52%), is the primary mechanism of contaminant removal. Data suggest inoculating earthworms may be a feasible way for reinforcing removal of PAH in contaminated sites.     

Climate change and urban land systems: bridging the gaps between urbanism and land science

ABSTRACT

Land science has generated critical knowledge about how humans modify Earth’s surface and has advanced our understanding of land as a coupled human–environment system. However, to date, most work has been in frontier environments with less attention – both conceptually and empirically – on how urban land systems affect the carbon cycle. Much of what is known about urban areas and the carbon cycle is limited to aggregate levels of activities within urban areas, usually by sector, with little focus on how the spatial configuration of urban land systems affects carbon-emitting activities. Given that urban areas produce about 70% of global energy-related CO₂ emissions, it is crucial to understand the relationship between urban environments, the activities they influence, and the resulting carbon emissions. This paper summarizes the current state of knowledge of how urban land systems affect carbon emissions and vulnerability, and identifies research gaps and opportunities for urban land science to contribute to climate change science, particularly through land architecture. We argue that more attention to urban land science conceptualization, measurement, and analysis would contribute to both fundamental knowledge about urban systems, as well as help identify policies and strategies for mitigation and adaptation to climate change at the urban scale.     

Water–energy–greenhouse gas nexus of urban water systems: Review of concepts,state-of-art and methods

Water supply and wastewater services incur a large amount of energy and GHG emissions. It is therefore imperative to understand the link between water and energy as their availability and demand are closely interrelated. This paper presents a literature review and assessment of knowledge gaps related to water–energy–greenhouse gas (GHG) nexus studies in an urban context from an ‘energy for water’ perspective. The review comprehensively surveyed various studies undertaken in various regions of the world and focusing on individual or multiple subsystems of an urban water system. The paper also analyses the energy intensity of decentralized water systems and various water end-uses together with the major tools and models used. A major gap identified from this review is the lack of a holistic and systematic framework to capture the dynamics of multiple water–energy–GHG linkages in an integrated urban water system where centralized and decentralized water systems are combined to meet increased water demand. Other knowledge gaps identified are the absence of studies, peer reviewed papers, data and information on water–energy interactions while adopting a ‘fit for purpose water strategy’ for water supply. Finally, based on this review, we propose a water–energy nexus framework to investigate ‘fit-for-purpose’ water strategy.     

Simultaneous determination of acidic pesticides in vegetables and fruits by liquid chromatography—tandem mass spectrometry

A sensitive and efficient method has been developed for the simultaneous determination of 73 multi-class acidic pesticides, such as phenoxy acid and sulfonylurea herbicides, in vegetables and fruits. The sample preparation procedure was carefully optimized for the efficient removal of co-extracted matrix components. The method involves extraction of acidic pesticides with acetonitrile containing hydrochloric acid, removal of water from crude extract by salting out, and sequential cleanup by octadecylsilyl silica gel and silica gel columns. For samples containing high amounts of pigments, such as spinach, additional cleanup using a graphitized carbon column was performed prior to liquid chromatography–mass spectrometry (LC–MS/MS) analysis. Recovery tests were performed for five times for each sample of cabbage, spinach, potato, eggplant, orange, and apple fortified at 0.01 mg kg?1. Out of the 73 tested pesticides, 70 for cabbage, 67 for spinach, 69 for potato, 67 for eggplant, 64 for orange, and 70 for apple were within the range of 70–120%, with relative standard deviations below 25%. Nitenpyram and pyrasulfotole showed low recoveries for all the samples tested, probably due to low recoveries from silica gel column. The developed method effectively removed co-extracted matrix components and was highly selective, with no interfering peaks found in the chromatograms of blank samples. The overall results indicate that the developed method is suitable for the quantitative analysis of acidic pesticide residues in vegetables and fruits.     

Application of a LC–MS/MS method for multi-mycotoxin analysis in infant formula and milk-based products for young children commercialized in Southern Brazil

ABSTRACT

An analytical method based on liquid chromatography–tandem mass spectrometry (LC–MS/MS) was validated and applied for the analysis of aflatoxin M₁ (AFM₁), ochratoxin A (OTA) and deoxynivalenol (DON) in infant formula and milk-based products for young children commercialized in Brazil. A total of 38 samples were evaluated, including 12 infant formula, 14 follow-on formula and 12 samples of milk-based products. AFM₁ was detected in 12 (32%) samples, and seven (18%) samples contained AFM₁ levels above the method limit of quantification in a concentration range between 0.013 and 0.067 ng mL^?1 (0.026 ± 0.019). Two samples of milk-based products exceeded the maximum level (ML) fixed by the European Union for AFM₁ in baby foods, however, all samples were in agreement with the levels established by the Brazilian regulation. OTA and DON were not detected in any of the analyzed samples.     

1000 kV交流输电线路噪声的计算模式和减缓措施

介绍了几家国内外研究机构建立的用来计算预测输电线路电晕可听噪声的模式,针对皖电东送淮南至上海1000 kV特高压交流示范工程输电线路的实际参数,建立了相应的计算公式,可以较为准确的预测该类型输电线路可听噪声的大小;交流输电线路电晕产生可听噪声的影响因素众多,根据是否可控将这些因素分为两大类,并分析了单个因素对可听噪声预测值的影响程度,针对输电电路导线参数、杆塔型式和附加材料三个方面的内容,提出了几类切实可行的输电线路可听噪声减缓措施,为后续1000 kV交流输电线路的设计和建设提供参考。