VELOCITY EQUATION FOR WATER QUALITY MODELING IN GEORGIA1

ABSTRACT: Tabletop water quality modeling still plays an important role in the water pollution control activities of the Georgia Environmental Protection Division. Tabletop models are those developed with out the aid of extensive field data. One important component of GEORGIA DOSAG, our basic water quality model, is the equation used to predict flow through velocity. However, Georgia is characterized by wide physiographic diversity which reduces the effectiveness of uncalibrated velocity equations. Using 15 years of accumulated time-of-travel studies, a series of empirical velocity equations were developed and calibrated to various physiographic conditions in Georgia. Equations are available for each major soil province and for three stream flow ranges within each province - Q<100 cfs, 100<Q<1000 cfs, and Q>1000 cfs. Now, in the absence of extensive field data, we have data based velocity equations which can be tailored to each site under study.     

Hermaphrodite sex role preferences: the role of partner body size, mating history and female fitness in the sea slug Chelidonura sandrana

Costs and benefits associated with matings and the effects of mating frequency on fitness commonly differ between the sexes. As a result, outcrossing simultaneous hermaphrodites may prefer to copulate in the more rewarding sex role, generating conflicts over sperm donation and sperm receipt between mates. Because recent sex role preference models remain controversial, we contrast here some of their assumptions and predictions in the sea slug Chelidonura sandrana. For this hermaphrodite with sperm storage and internal fertilisation, risk-averse models assume that fitness pay-offs are constantly higher in the female than in the male function in any single mating. Moreover, excluding mutual partner assessment, these models predict male mating behaviour to be independent of receiver traits. The competing gender ratio hypothesis assumes that relative fitness pay-offs, and thus the preferred mating roles, vary and may reverse between matings and predicts that ejaculation strategies co-vary with receiver quality. We found that field mating rates of C. sandrana substantially exceeded what is required to maintain female fertility and fecundity, indicating large variation in direct female benefits between matings. We further demonstrate that male copulation duration adaptively increased with partner body size (i.e. fecundity) but decreased with recent partner promiscuity. These findings are compatible with the gender ratio hypothesis but contradict risk-averse models.     

交通事故再现技术研究现状与发展趋势

道路交通事故再现不仅是交通事故责任鉴定和原因分析的重要方法,也是交通事故防治的重要内容。在详细介绍国内外事故再现计算机仿真技术的基础上,分析目前事故再现系统开发中事故现场数据采集技术、碰撞前后速度估算的技术、碰撞过程进行模拟的虚拟现实技术的研究现状与存在的问题,提出进一步优化的方向,进而达到完善交通事故模拟再现的目的。最后指出我国交通事故再现技术进一步研究的内容和发展趋势。     

Determination of turbulent burning velocities of dust air mixtures with the open tube method

Correlating turbulent burning velocity to turbulence intensity and basic flame parameters-like laminar burning velocity for dust air mixtures is not only a scientific challenge but also of practical importance for the modelling of dust flame propagation in industrial facilities and choice of adequate safety strategy. The open tube method has been implemented to measure laminar and turbulent burning velocities at laboratory scale for turbulence intensities in the range of a few m/s. Special care has been given to the experimental technique so that a direct access to the desired parameters was possible minimising interpretation difficulties. In particular, the flame is propagating freely, the flame velocity is directly accessible by visualisation and the turbulence intensity is measured at the flame front during flame propagation with special aerodynamic probes. In the present paper, those achievements are briefly recalled. In addition, a complete set of experiments for diametrically opposed dusts, starch and aluminium, has been performed and is presented hereafter. The experimental data, measured for potato dust air mixtures seem to be in accordance with the Bray Gülder model in the range of 1.5 m/s<u′<3.5 m/s. For a further confirmation, the measurement range has been extended to lower levels of turbulence of u′<1.5 m/s. This could be achieved by changing the mode of preparation of the dust air mixture. In former tests, the particles have been injected into the tube from a pressurised dust reservoir; for the lower turbulence range, the particles have been inserted into the tube from above by means of a sieve–riddler system, and the turbulence generated from the pressurised gas reservoir as before. For higher levels of turbulence, aluminium air mixtures have been investigated using the particle injection mode with pressurised dust reservoir. Due to high burning rates much higher flame speeds than for potato dusts of up to 23 m/s have been obtained.     

卧式电除尘器电晕极优化实验研究

运用粉尘粒子荷电原理,对四种电晕极的主要技术性能进行了试验研究,探讨了卧式电除尘器的最佳极配形式。     

Description and evaluation of a model of deposition velocities for routine estimates of dry deposition over North America. Part II: review of past measurements and model results

Numerical sensitivity tests and four months of complete model runs have been conducted for the Routine Deposition Model (RDM). The influence of individual model inputs on dry deposition velocity as a function of land-use category (LUC) and pollutant (SO₂, O₃, SO²⁻₄ and HNO₃) were examined over a realistic range of values for solar radiation, stability and wind speed. Spatial and temporal variations in RDM deposition velocity (V_d) during June – September 1996 time period generated using meteorological input from a mesoscale model run at 35 km resolution over north-eastern North America were also examined. Comparison of RDM V_d values to a variety of measurements of dry deposition velocities of SO₂, O₃, SO²⁻₄ and NHO₃ that have been reported in the literature demonstrated that RDM produces realistic results. Over northeastern NA RDM monthly averaged dry deposition velocities for SO₂ vary from 0.2 to 3.0 cm s⁻¹ with the highest deposition velocities over water surfaces. For O₃, the monthly averaged dry deposition velocities are from 0.05 to 1.0 cm s⁻¹ with the lowest values over water surfaces and the highest over forested areas. For HNO₃, the monthly averaged dry deposition velocities have the range of 0.5 to 6 cm s⁻¹, with the highest values for forested areas. For SO²⁻₄, they range from 0.05–1.5 cm s⁻¹, with the lowest values over water and the highest over forest. The monthly averaged dry deposition velocities for SO₂ and O₃ are higher in the growing season compared to the fall, but this behaviour is not apparent for HNO₃ and sulphate. In the daytime, the hourly averaged dry deposition velocities for SO₂, O₃, SO²⁻₄ and HNO₃ are higher than that in the nighttime over most of the vegetated area. The diurnal variation is most evident for surfaces with large values for leaf area index (LAI), such as forests. Based on the results presented in this paper, it is concluded that RDM V_d values can be combined with measured air concentrations over hourly, daily or weekly periods to determine dry deposition amounts and with wet deposition measurements to provide seasonal estimates of total deposition and estimates of the relative importance of dry deposition.     

Testes mass in megachiropteran bats varies in accordance with sperm competition theory

Sperm competition is a widespread phenomenon influencing a range of characters, including investment in gonadal tissue. Conspecific proximity is one factor which can influence the risk of sperm competition and hence testicular investment, and decreased confidence of paternity may be one cost of group living. Aspects of female biology may also influence spermatogenic investment and sperm morphology. This study examines the associations between relative testes mass and roost-group size across 17 species of Megachiroptera. Associations between breeding season duration and investment in spermatogenesis are also examined, as are associations between female reproductive tract dimensions and testes mass and dimensions of spermatozoa across all bats. Relative testes mass was significantly positively associated with roost-group size at a species level and after appropriate phylogenetic control (pairwise comparisons and comparison of independent contrasts). There were no significant relationships between breeding season duration and relative testes mass. Across all bats, neither testes mass nor sperm length were significantly related to dimensions of the female tract. The results are discussed in the context of sperm competition. Received: 7 January 1998 / Accepted after revision: 8 August 1998     

Seminal fluid enhances sperm viability in the leafcutter ant Atta colombica

The seminal fluid that accompanies sperm in ejaculates has been shown or suggested to affect sperm competition and paternity success of insects by preventing female remating, inducing oviposition, and forming mating plugs. In Atta leafcutter ants, queens have multiple mates but never remate later in life, although they may live and produce fertilized eggs for several decades. The mating biology and life history of these ants therefore suggests that the major function of seminal fluid is to maximize sperm viability during copulation, sperm transfer, and initial sperm storage. We tested this hypothesis by comparing the viability of testis sperm and ejaculated sperm (mixed with seminal fluid) and found a significant positive effect of seminal fluid on sperm viability. We further quantified this positive effect by adding accessory gland secretion (a major component of seminal fluid) in a dilution series, to show that minute quantities of accessory gland secretion achieve significant increases in sperm viability. Sperm stored by queens for 1 year benefited in a similar way from being exposed to accessory gland compounds after dissection in control saline solution. Our results provide the first empirical evidence that seminal fluid is important for the production of viable ejaculates and that the accessory glands of Atta males—despite their small size—are functional and produce a very potent secretion.     

液化四氟乙烷小孔泄漏试验研究

采用高速摄影技术,考察了液化四氟乙烷发生小孔泄漏时,其水平泄漏和垂直泄漏的初始云团演化行为、泄漏的质量流率、喷射速度和喷射角,并与理论计算公式进行了对比。结果表明:水平喷射两相云团尾部出现涡流,涡流大幅加快了云团向空气中扩散的速率;垂直喷射的两相云团在地面形成液池,液池大幅增加了液化气体向空气中蒸发的速率。水平泄漏试验的喷射角与容器内超压变化规律相似,泄放初期喷射角逐渐增大,经历一段平坦期,到泄放末期喷射角减小。水平泄漏和垂直泄漏的初始喷射速度分别为25 m/s和20 m/s,与理论值26.6 m/s基本吻合。水平泄漏的质量流率的试验值和理论值分别为0.0598 kg/s和0.0684 kg/s,垂直泄漏的分别为0.0472 kg/s和0.059 6 kg/s,结果对比基本吻合,推荐的泄漏质量流率和小孔喷射速度公式可以用于液化四氟乙烷小孔泄漏。     

Ozone concentrations, flux and potential effect on yield during wheat growth in the Northwest-Shandong Plain of China

Ozone (O₃) concentration and flux (F_o) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O₃-induced wheat yield loss was estimated by utilizing O₃ exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O₃ concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O₃ concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O₃ concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (V_d) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged V_d during daytime (6:00–18:00) and nighttime (18:00–6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V_d was about 1.5 cm/sec. The magnitude of V_d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean F_o appeared at 14:00, and the maximum measured F_o was − 33.5 nmol/(m²·sec). Averaged F_o during daytime and nighttime were − 6.9 and − 1.5 nmol/(m²·sec), respectively. (4) Using O₃ exposure-response functions obtained from the USA, Europe, and China, the O₃-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%–23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.