CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.     

灾难模型化及其国外主要开发商

简略分析了灾难模型化和它在保险业中的应用;介绍了当前国外从事灾难模型化的主要研发单位,包括独立的模型化公司、大学研究所、再保险公司、再保险中介经纪公司和政府机构。同时收集了一些最近灾难模型化些文献,希望这些信息能有助于同行在我国减灾保险方面的研究。     

Linking species- and ecosystem-level impacts of climate change in lakes with a complex and a minimal model

To study the interaction between species- and ecosystem-level impacts of climate change, we focus on the question of how climate-induced shifts in key species affect the positive feedback loops that lock shallow lakes either in a transparent, macrophyte-dominated state or, alternatively, in a turbid, phytoplankton-dominated state. We hypothesize that climate warming will weaken the resilience of the macrophyte-dominated clear state. For the turbid state, we hypothesize that climate warming and climate-induced eutrophication will increase the dominance of cyanobacteria. Climate change will also affect shallow lakes through a changing hydrology and through climate change-induced eutrophication. We study these phenomena using two models, the full ecosystem model PCLake and a minimal dynamic model of lake phosphorus dynamics. Quantitative predictions with the complex model show that changes in nutrient loading, hydraulic loading and climate warming can all lead to shifts in ecosystem state. The minimal model helped in interpreting the non-linear behaviour of the complex model. The main output parameters of interest for water quality managers are the critical nutrient loading at which the system will switch from clear to turbid and the much lower critical nutrient loading – due to hysteresis – at which the system switches back. Another important output parameter is the chlorophyll-a level in the turbid state. For each of these three output parameters we performed a sensitivity analysis to further understand the dynamics of the complex model PCLake. This analysis showed that our model results are most sensitive to changes in temperature-dependence of cyanobacteria, planktivorous fish and zooplankton. We argue that by combining models at various levels of complexity and looking at multiple aspects of climate changes simultaneously we can develop an integrated view of the potential impact of climate change on freshwater ecosystems.     

Proposing an information criterion for individual-based models developed in a pattern-oriented modelling framework

Individual-based models (IBMs) have been improved in quality and reliability in recent years with an approach called pattern-oriented modelling (POM). POM proposes guidelines to develop models reproducing multiple patterns observed on the field and to test systematically how well the IBMs reproduce them. POM studies used generally traditional methods of goodness of fit such as the sum of squares evaluation or ad hoc comparisons of fitting errors and variations. Model selection, however, can be a rigorous statistical approach based on information theory and information criteria such as the Akaike's information criterion (AIC) or the deviance information criterion (DIC). So far, it has not been tried to link POM to these rigorous techniques. The main problems to achieve that are: (a) the difficulty to have likelihood functions for IBMs’ parameters and (b) the possibility to obtain posterior distributions of IBMs’ parameters given the patterns to reproduce. In a first part, this paper answers problem (a) by proposing and explaining how to calculate a deviance measure (POMDEV) for models developed in a context of POM. And while answering the second problem, a second part of the paper proposes an information criterion for model selection in a POM context (the pattern-oriented modelling information criterion: POMIC). This criterion does not yet have the same theoretical foundation as, e.g., AIC, but uses formal analogies to the DIC. In a third part POMIC is tested with a modelling exercise. This exercise shows the potential of POMIC to use multiple patterns for selecting among multiple potential submodels and eventually select the most parsimonious and well fitting model version. We conclude that POMIC, although being a heuristically derived approach, can greatly improve the POM framework.     

Challenges of simulating complex environmental systems at the landscape scale: A controversial dialogue between two cups of espresso

With the advancement of computational systems and the development of model integration concepts, complexity of environmental model systems increased. In contrast to that, theory and knowledge about > environmental systems as well as the capability for environmental systems analyses remained, to a large extent, unchanged. As a consequence, model conceptualization, data gathering, and validation, have faced new challenges that hardly can be tackled by modellers alone. In this discourse-like review, we argue that modelling with reliable simulations of human-environmental interactions necessitate linking modelling and simulation research much stronger to science fields such as landscape ecology, community ecology, eco-hydrology, etc. It thus becomes more and more important to identify the adequate degree of complexity in environmental models (which is not only a technical or methodological question), to ensure data availability, and to test model performance. Even equally important, providing problem specific answers to environmental problems using simulation tools requires addressing end-user and stakeholder requirements during early stages of problem development. In doing so, we avoid modelling and simulation as an end of its own.     

Spatio-temporal dissolved oxygen dynamics in the Orbetello lagoon by fuzzy pattern recognition

This paper models the dissolved oxygen (DO) dynamics in the Orbetello lagoon as a function of the physico-chemical and ecological system variables, including the submerged vegetation, nutrients, and hydrodynamics. It should be viewed as the concluding sequel to a previous paper describing the dynamics of the lagoon ecosystem [Giusti, E., Marsili-Libelli, S., 2006. An integrated model for the Orbetello lagoon ecosystem, Ecol. Model. 196, 379–394] by introducing the missing DO dynamics. The model considers the oxygen demand originating from the decay of carbonaceous and nitrogenous compounds, as well as photosynthesis and natural reaeration by winds and currents as the oxygen producing processes. With a fixed-parameter set the model could accurately reproduce each single circadian DO cycle, but in the long run it failed to extend this fit and could not accommodate the large DO fluctuations induced by the seasonal variability. In order to enhance the model flexibility, a fuzzy pattern recognition algorithm was designed to classify the circadian DO patterns into four typical behaviours, related to the season, and estimate the corresponding parameters, with the overall model output being a fuzzy combination of these sets. The paper discusses several methods to patch the parameter sets and compares their performance in tracking long-term DO variations. A final assessment of the model validity is obtained by incorporating the whole DO dynamics (model, fuzzy pattern recognition and parameter combination) into the general lagoon model and producing a consistently correct series of DO daily distributions over a yearly cycle. Thus the paper contains both a practical and a methodological aspect. The practical one is the linking of all the lagoon dynamics to the dissolved oxygen kinetics in order to clarify to what extent macroalgae and macrophytes influence the oxygen balance. The methodological aspect consists of extending the validity of short-term models to long time-horizons through a patching technique supported by fuzzy pattern recognition.     

Modelling assessment of PM10 exposure control policies in Northern Italy

To assess the impact of three different emission reduction scenarios on PM10 concentrations in Northern Italy, the TCAM multiphase model has been applied in the framework of the CityDelta III-CAFE EU project. The considered domain, that is characterized by high urban and industrial emissions and a dense road traffic, due to frequently stagnating meteorological conditions is often affected by severe PM10 levels, far from the European standard regulations. The impact evaluation has been performed in terms of both yearly mean values and 50 g/m³ exceedance days for the 2004 Base Case simulation. The results show that the three selected emission reduction scenarios up to 2020 improve air quality all over the domain, in particular, in the area with higher emission density.     

Validation of discharge and atmospheric dispersion for unpressurised and pressurised carbon dioxide releases

This paper discusses the validation of discharge and subsequent atmospheric dispersion for both unpressurised and pressurised carbon dioxide releases using the consequence modelling package Phast.The paper first summarises the validation of the Phast dispersion model (UDM) for unpressurised releases. This includes heavy gas dispersion from either a ground-level line source (McQuaid wind-tunnel experiments) or an area source (Kit-Fox field experiments). For the McQuaid experiments minor modifications of the UDM were made to support line sources. For the Kit Fox experiments steady-state and 20-s finite-duration releases were simulated for both neutral and stable conditions. Most accurate predictions of the concentrations for finite duration releases were obtained using the UDM Finite Duration Correction method.Using experiments funded by BP and Shell and made available via DNV's CO2PIPETRANS JIP, the paper secondly summarises the validation of the Phast discharge and dispersion models for pressurised CO₂ releases. This modelling accounted for the possible presence of the solid CO₂ phase following expansion to atmospheric pressure. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases. Both the flow rate and the concentrations were found to be predicted accurately.The above validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Phast validation of discharge and atmospheric dispersion for pressurised carbon dioxide releases

The consequence modelling package Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released substance to occur only in the vapour and liquid phases. The latest versions of Phast include extended models which also allow for the occurrence of fluid to solid transition for carbon dioxide (CO₂) releases.As part of two projects funded by BP and Shell (made publicly available via CO2PIPETRANS JIP), experimental work on CO₂ releases was carried out at the Spadeadam site (UK) by GL Noble Denton. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases (vapour storage). The CO₂ was stored in a vessel with attached pipework. At the end of the pipework a nozzle was attached, where the nozzle diameter was varied.This paper discusses the validation of Phast against the above experiments. The flow rate was predicted accurately by the Phast discharge models (within 10%; considered within the accuracy at which the BP experimental data were measured), and the concentrations were found to be predicted accurately (well within a factor of two) by the Phast dispersion model (UDM). This validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.