ZnO包覆Al_2O_3的制备表征及光催化性能研究

采用化学沉积法制备了ZnO包覆Al2O3光催化剂,并通过X射线衍射(XRD)、扫描电镜(SEM)进行了表征。在自制的光化学反应器中,以中压汞灯作光源,一定浓度的甲基橙为光催化反应模型化合物,研究了光催化剂的活性。考察了甲基橙初始浓度、催化剂加投量、pH值、温度、光照强度、反应液体积等因素对脱色率的影响。实验结果表明,ZnO包覆Al2O3复合光催化剂具有较高的光催化活性。在250W中压汞灯下光照3h,0.10g复合光催化剂能使200mL,10mg/L甲基橙溶液的脱色率达到92.21%。     

化学吸收法采集固定污染源氨气的影响因素探究

固定污染源氨气的手工监测,干扰因素较多,其中采样环节尤为关键。实验通过催化氧化-化学发光法考察不同采样管线材质对氨气的吸附效果,离子色谱法考察化学吸收法采集氨气的吸收瓶类型、采样流量、吸收液种类、吸收液浓度及体积等采样条件对氨气吸收效率的影响。实验表明,316 L不锈钢与聚四氟乙烯对氨气的吸附较小,氨气的采样流量不宜超过1.0 L/min,棕色气泡式吸收瓶更适用于氨气样品的采集,磷酸溶液作吸收液对氨气的吸收效率较好,对于低浓度的氨气样品,应采用低流量长时间采集。     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

地下水PRB原位生物修复中一种释氧材料的改进技术及效果分析

释氧材料经济有效的释氧是地下水原位生物修复的关键因素。实验通过在释氧材料中加入膨润土、磷酸二氢钾和硫酸铵等,改进释氧材料的性能。柱实验结果显示,该释氧材料释氧速率缓慢,释氧时间长,可以使溶液中DO长期保持在5 mg/L以上;另外,释氧材料中添加的缓冲剂及天然含水层介质对pH值有较好的缓冲作用,可以使pH值达到后续生物修复的要求。     

合流制排水系统溢流污染就地调蓄处理控制技术研究

在对高效混合絮凝斜板沉淀工艺进行现场中试的基础上,将化学强化处理工艺与调蓄池相结合,针对上海市某合流制排水系统,进行调蓄/沉淀池的概念设计,提出主要设计参数,利用计算流体力学(CFD)模型对调蓄/沉淀池进行优化设计.试验和模拟结果表明,调蓄/沉淀池与单纯的调蓄池相比具有更好的溢流污染控制效果和效益/造价比.     

预处理垃圾焚烧飞灰作为碱胶凝材料混合材的研究

试验分析了垃圾焚烧飞灰的主要化学成分及矿物组成,探讨了预处理垃圾焚烧飞灰作为碱胶凝材料混合材的可能性.研究表明,垃圾焚烧飞灰主要由黏土类矿物组成,飞灰直接作为混合材参与水化过程会产生明显膨胀现象,加入30%(质量分数)飞灰制成的矿渣/飞灰试块在成型1 d脱膜时膨胀率达到15.7%,标准养护28 d后无侧压抗压强度只有12.4 MPa.对飞灰进行热活化预处理,900℃条件下活化效果最佳,同样的飞灰掺量下,试块在标准养护28 d后无侧压抗压强度达到46.0 MPa,膨胀现象消失,且碱胶凝材料中重金属稳定性良好.     

村级养殖种植园区碳素物质流分析——以北京市平谷区西柏店村为例

将西柏店村畜禽养殖规模折合为1.5万头猪场当量污染负荷,并将整个园区生产工艺分为养殖、废弃物处理和种植3个阶段,不考虑隐藏流的情况下,以1年为系统边界,通过数据调查、已有资料研究和小区种植试验,采用物质流分析方法分析了西柏店村养殖种植园区在整个生产工艺的碳素流动,以期为村级养殖种植园区大力发展低碳经济提供新的方法和视角,为村级区域循环经济及可持续发展提供减少环境压力解决方案的科学依据。通过园区养殖种植过程的C素分析表明,养殖阶段年输入C素总量为112.52×10^4 kg,其中猪身总固碳量为40.04×10^4 kg,粪碳和尿碳总量为49.29×10^4 kg,以CO2形式代谢排出的C为23.19×10^4 kg。废弃物处理阶段输入的碳主要为粪碳和尿碳,其总量为49.29×10^4 kg,其中9.79×10^4 kg尿碳直接进入种植阶段,39.50×10^4 kg粪碳进入沼气站处理,沼气转化出的碳为11.02×10^4 kg,其中CH4为8.43×10^4 kg,CO2为2.59×10^4 kg,养殖污水中通过CH4排放再加上其他途径释放的碳约有23.66×10^4 kg,占粪碳量的59.89%。进入种植阶段的碳素主要为尿碳、沼渣和沼液的碳素,合计为14.61×10^4 kg,假设该村43 hm^2耕地能全部施用沼肥,不计其他作物种植,1季玉米种植土壤可库存有机碳为60.50×10^4 kg,为进入种植阶段碳素14.61×10^4 kg的4倍,还可增加植物有机碳27.31×10^4 kg。由C素流动分析可知,西柏店村具有可容纳该村养殖废弃物的环境容量,有较好实现养殖废弃物循环利用的条件,但需大力加强畜禽废弃物的管理和处理,提高园区养殖废弃物循环利用效率。     

Remediation of copper-contaminated topsoils from a wood treatment facility using in situ stabilisation

Five organic matters, three phosphate compounds, zerovalent iron grit (ZVIG, 2% by soil weight), two alkaline compounds, and two commercial formulations were incorporated, singly and some combined with ZVIG, into a highly Cu-contaminated topsoil (Soil P7, 2600 mg Cu kg⁻¹) from a wood treatment facility. Formulations and two composts were also singly incorporated into a slightly Cu-contaminated topsoil (Soil P10, 118 mg Cu kg⁻¹) from the facility surrounding. This aimed to reduce the labile pool of Cu and its accumulation in beans cultivated on potted soils in a climatic chamber. Lowest Cu concentration in soil solution occurred in P7 soils amended with activated carbon (5%) and ZVIG, singly and combined. Basic slag (3.9%) and compost of sewage sludge (5%) combined with ZVIG promoted shoot production and limited foliar Cu accumulation. For amended P10 soils, no changes occurred in soil solution and foliar Cu concentrations, but one compost increased shoot production.     

Nitrogen budget and its environmental loading in an urban ecosystem with the rapid urbanisation of China

A detailed nitrogen (N) budget has been developed for an urban ecosystem based on the method of material flow analysis. How increased human activity and urbanisation influences N cycling have also been analysed. Total N input and output in the urban ecosystem of Zhengzhou City (ZUE) was calculated at 304.8?Gg was 275.3?Gg year^?1, resulting in an N accumulation of 29.5?Gg year^?1. Industry and human life activities, which respectively accounted for 43.8% and 34.2% of total N inputs and 52.6% and 29.1% of total N outputs, were the core of N flow in the urban ecosystem. Humans activities mediated more than 98% N inputs into the ZUE, 73.2% of N was released into the atmosphere and 11.7% into hydrosphere. This very large volume of released N could contribute to regional problems. High energy consumption, insufficient wastewater treatment facility practices, and low N use efficiency are the primary causes of pollution. The major challenge ahead for the urban ecosystem is how to manage high-intensity N pollutant inputs to the urban ecosystems coupled with incomplete N cycling and removal. Based on the analysis of the N budget and loading, this study also proposes an N management strategy for the ZUE.     

酸雨对建筑材料的影响及防治研究综述

综合分析了酸雨对建筑外墙的涂料、石材、混凝土等主要建筑构件的腐蚀原理,并提出了防治措施,来预防酸雨对建筑材料的侵害。