核电厂核事故应急疏散研究

根据我国法规、标准与美国核管委对核电厂核事故应急疏散的要求,考虑我国核电厂特殊的厂址条件与社会环境,分析核事故应急疏散的可行性。通过应急疏散行为研究、厂区的交通需求估计和路网分析,对不同情境,考虑核事故应急疏散的特殊问题,分别采用人工容量分析与宏观仿真模拟得到应急疏散时间。针对某核电厂,给出核事故应急疏散分析的一般步骤、方法与计算结果。对宏观仿真模型的主要参数进行灵敏度分析,找出影响应急疏散时间的主要因素,提出缩短应急疏散时间的针对性措施。     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Treatment of digestate from a co-digestion biogas plant by means of vacuum evaporation: Tests for process optimization and environmental sustainability

Vacuum evaporation consists in the boiling of a liquid substrate at negative pressure, at a temperature lower than typical boiling temperature at atmospheric conditions. Condensed vapor represents the so called condensate, while the remaining substrate represents the concentrate.This technology is derived from other sectors and is mainly dedicated to the recovery of chemicals from industrial by-products, while it has not been widely implemented yet in the field of agricultural digestate treatment. The present paper relates on experimental tests performed in pilot-scale vacuum evaporation plants (0.100 and 0.025 m³), treating filtered digestate (liquid fraction of digestate filtered by a screw-press separator). Digestate was produced by a 1 MW_e anaerobic digestion plant fed with swine manure, corn silage and other biomasses. Different system and process configurations were tested (single-stage and two-stage, with and without acidification) with the main objectives of assessing the technical feasibility and of optimizing process parameters for an eventual technology transfer to full scale systems.The inputs and outputs of the process were subject to characterization and mass and nutrients balances were determined.The vacuum evaporation process determined a relevant mass reduction of digestate.The single stage configuration determined the production of a concentrate, still in liquid phase, with a total solid (TS) mean concentration of 15.0%, representing, in terms of mass, 20.2% of the input; the remaining 79.8% was represented by condensate. The introduction of the second stage allowed to obtain a solid concentrate, characterized by a content of TS of 59.0% and representing 5.6% of initial mass.Nitrogen balance was influenced by digestate pH: in order to limit the stripping of ammonia and its transfer to condensate it was necessary to reduce the pH. At pH 5, 97.5% of total nitrogen remained in the concentrate. This product was characterized by very high concentrations of total Kjeldhal nitrogen (TKN), 55,000 mg/kg as average.Condensate, instead, represented 94.4% of input mass, containing 2.5% of TKN. This fraction could be discharged into surface water, after purification to meet the criteria imposed by Italian regulation. Most likely, condensate could be used as dilution water for digestion input, for cleaning floor and surfaces of animal housings or for crop irrigation.The research showed the great effectiveness of the vacuum evaporation process, especially in the two stage configuration with acidification. In fact, the concentration of nutrients in a small volume determines easier transportation and reduction of related management costs. In full scale plants energy consumption is estimated to be 5–8 kWh_e/m³ of digestate and 350 kWh_t/m³ of evaporated water.     

Modeling the impacts of calcite precipitation on the epilimnion of an ultraoligotrophic, hard-water lake

A mass-balance model of calcite precipitation was developed to investigate the interactions of the varied processes governing the generation and fate of calcite in lakes. The model was used in conjunction with data to assess the evolution and impact of calcite precipitation for calcareous, ultraoligotrophic Torch Lake, Michigan (USA). This lake is an ideal setting for implementation of a baseline modeling study of calcite precipitation where the physical drivers could be evaluated without being dominated, as in many systems, by biological processes. The model provides a representation of calcite precipitation with particulate surface area changing over time, and demonstrates that it is possible for the change in water clarity to be explained by calcite precipitation employing standard optical models. Using the mass balance model to quantify the roles of the various chemical, biological and physical processes interacting in the lake's epilimnion, it was shown that the seasonal temperature rise and air-water CO₂ exchange drive calcite precipitation much more than primary production for this ultraoligotrophic system.     

Species distribution modelling—Effect of design and sample size of pseudo-absence observations

We explored the effect of varying pseudo-absence data in species distribution modelling using empirical data for four real species and simulated data for two imaginary species. In all analyses we used a fixed study area, a fixed set of environmental predictors and a fixed set of presence observations. Next, we added pseudo-absence data generated by different sampling designs and in different numbers to assess their relative importance for the output from the species distribution model. The sampling design strongly influenced the predictive performance of the models while the number of pseudo-absences had minimal effect on the predictive performance. We attribute much of these results to the relationship between the environmental range of the pseudo-absences (i.e. the extent of the environmental space being considered) and the environmental range of the presence observations (i.e. under which environmental conditions the species occurs). The number of generated pseudo-absences had a direct effect on the predicted probability, which translated to different distribution areas. Pseudo-absence observations that fell within grid cells with presence observations were purposely included in our analyses. We discourage the practice of excluding certain pseudo-absence data because it involves arbitrary assumptions about what are (un)suitable environments for the species being modelled.     

宝钢厂区植被碳储量及其固碳效益评价

以著名钢铁企业上海宝钢为例,基于厂区植被调查、航片数字化解释、优势种生物量测定及模型建立,对宝钢厂区植被碳储量和固碳能力进行估算,并通过碳税法对其固碳效益进行评价,以期为城市工业区绿地群落配置和绿化树种选择、企业绿化建设的费用效益分析提供更为科学的依据。结果表明:宝钢厂区植被总碳储量为3992.99～4736.17 t,固碳效益为13507.33～16185.85万元;平均碳密度为45.82～53.27 t/hm2,固碳能力为5.91～6.87t/(hm2.a),高于上海城市森林平均值,但小于中国森林平均值,一定程度上受平均胸径、郁闭度及群落密度等因素影响。厂区在进行绿化建设时,应考虑选择防污且固碳能力强的植物,构建防污固碳兼有型群落,发挥植被的多元功能。     

氧化塘水质预测研究进展

本文讨论了氧化塘的净化污水机理和水质变化特点。提出了用于进行氧化塘水质预测的二维水质模型。探讨了氧化塘水质预测研究的发展趋势。     

The gloomy greenhouse: Should the world phase out fossil fuels?

In 1988 the Toronto World Conference on the Changing Atmosphere called for a reduction of CO₂ emissions of the industrialized countries by approximately 20% by the year 2005 as compared with 1988. A stabilization of CO₂ concentrations would require an eventual emissions reduction of more than 50% of present levels. Model runs were performed with the Dutch Integrated Model for the Assessment of the Greenhouse Effect (IMAGE) to put these figures into perspective. It was found that the suggested emissions reduction levels could indeed be adequate to prevent global temperature change from moving beyond past climate experience. However, this would only be the case when these reduced levels of emissions were achieved at a global scale and maximum emission control for the other greenhouse gases was implemented. A delayed response analysis shows that the policies of the coming decades are crucial for the eventual control of the greenhouse effect.     

APPLICATION OF A SEDIMENT ROUTING MODEL TO A MIDDLE EUROPEAN WATERSHED1

ABSTRACT: A simulation model that computes sediment yield due to sheet and rill erosion at the outlet of a large watershed requires daily precipitation and the soil, topographic, and vegetative characteristics of the watershed. An important problem, particularly in a large watershed, is the transport of sediment produced in the sub-watersheds to the outlet of the whole watershed. This problem is approached mathematically by a sediment routing model that is used as a component of the total model.     

MODEL FOR PREDICTING TRANSPORT OF PESTICIDES AND THEIR METABOLITES IN THE UNSATURATED ZONE1

ABSTRACT: A finite element model based on Galerkin's upstream weighted residual technique was developed to predict the simultaneous convective-dispersion transport and transformations of pesticides and their metabolites in the unsaturated zone. Transformations of the parent compound and its metabolites were assumed to be first-order reactions for oxidation and hydrolysis, while adsorption of the pesticide species (parent compound and metabolites) to the soil components was assumed to be represented by a linear equilibrium (Freundlich type) isotherm. Volatilization and plant root uptake of pesticides in the solution phase were neglected in the analysis. The proposed model was used to simulate the transport and transformation of aldicarb and its metabolites, aldicarb sulfoxide and aldicarb sulfone, in the soil profile. Several examples are used to demonstrate the accuracy, validity, and applicability of the proposed model. Simulated results indicate that the proposed model can potentially be used to estimate the mass flux of water, and pesticide and pesticide metabolite concentrations in the subsurface environment. However, further verification of the model against actual field data is needed to fully demonstrate the model's potential.