The weight method: a new screening method for estimating pesticide deposition from knapsack sprayers in developing countries

Investigations of occupational and environmental risk caused by the use of agrochemicals have received considerable interest over the last decades. And yet, in developing countries, the lack of staff and analytical equipment as well the costs of chemical analyses make it difficult, if not impossible, to monitor pesticide contamination and residues in humans, air, water, and soils. A new and simple method is presented here for estimation of pesticide deposition in humans and soil after application. The estimate is derived on the basis of water mass balance measured in a given number of high absorbent papers under low evaporative conditions and unsaturated atmosphere. The method is presented as a suitable, rapid, low cost screening tool, complementary to toxicological tests, to assess occupational and environmental exposure caused by knapsack sprayers, where there is a lack of analytical instruments. This new method, called the “weight method”, was tested to obtain drift deposition on the neighbouring field and the clothes of the applicator after spraying water with a knapsack sprayer in one of the largest areas of potato production in Colombia. The results were confirmed by experimental data using a tracer and the same set up used for the weight method. The weight method was able to explain 86% of the airborne drift and deposition variance.     

Use of tandem circulation wells to measure hydraulic conductivity without groundwater extraction

Conventional methods to measure the hydraulic conductivity of an aquifer on a relatively large scale (10-100 m) require extraction of significant quantities of groundwater. This can be expensive, and otherwise problematic, when investigating a contaminated aquifer. In this study, innovative approaches that make use of tandem circulation wells to measure hydraulic conductivity are proposed. These approaches measure conductivity on a relatively large scale, but do not require extraction of groundwater. Two basic approaches for using circulation wells to measure hydraulic conductivity are presented; one approach is based upon the dipole-flow test method, while the other approach relies on a tracer test to measure the flow of water between two recirculating wells. The approaches are tested in a relatively homogeneous and isotropic artificial aquifer, where the conductivities measured by both approaches are compared to each other and to the previously measured hydraulic conductivity of the aquifer. It was shown that both approaches have the potential to accurately measure horizontal and vertical hydraulic conductivity for a relatively large subsurface volume without the need to pump groundwater to the surface. Future work is recommended to evaluate the ability of these tandem circulation wells to accurately measure hydraulic conductivity when anisotropy and heterogeneity are greater than in the artificial aquifer used for these studies.     

Using radon-222 as indicator for the evaluation of the efficiency of groundwater remediation by in situ air sparging

A common approach for remediation of groundwater contamination with volatile organic compounds (VOCs) is contaminant stripping by means of in situ air sparging (IAS). For VOC stripping, pressurized air is injected into the contaminated groundwater volume, followed by the extraction of the contaminant-loaded exhaust gas from the vadose soil zone and its immediate on-site treatment. Progress assessment of such remediation measure necessitates information (i) on the spatial range of the IAS influence and (ii) on temporal variations of the IAS efficiency. In the present study it was shown that the naturally occurring noble gas radon can be used as suitable environmental tracer for achieving the related spatial and temporal information. Due to the distinct water/air partitioning behaviour of radon and due to its straightforward on-site detectability, the radon distribution pattern in the groundwater can be used as appropriate measure for assessing the progression of an IAS measure as a function of space and time. The presented paper discusses both the theoretical background of the approach and the results of an IAS treatment accomplished at a VOC contaminated site lasting six months, during which radon was applied as efficiency indicator.     

Tracer transport model at Japan meteorological agency and its application to the ETEX data

This paper describes the JMA tracer transport model and its sensitivity to model physics and initial conditions by using the ETEX data. Compared with observations, the model overestimates ground-level concentration in the early stage within about one day from the emission, possibly due to underestimation of vertical diffusion. In the early stage, the enhanced vertical diffusion effectively transports the tracer upward and decreases the ground-level concentration, while in the later stage, it enhances downward transports from the upper layer and increases the ground-level concentration. A conceptual model is given for understanding the vertical transport due to vertical diffusion. The horizontal diffusion introduced to the model has preferable impacts on forecasts especially in the early stage. Finally, we discuss the predictability of this model based on sensitivity to initial conditions of emission time and height.     

Evaluation of groundwater flow patterns around a dual-screened groundwater circulation well

Dual-screened groundwater circulation wells (GCWs) can be used to remove contaminant mass and to mix reagents in situ. GCWs are so named because they force water in a circular pattern between injection and extraction screens. The radial extent, flux and direction of the effective flow of this circulation cell are difficult to measure or predict. The objective of this study is to develop a robust protocol for assessing GCW performance. To accomplish this, groundwater flow patterns surrounding a GCW are assessed using a suite of tools and data, including: hydraulic head, in situ flow velocity, measured hydraulic conductivity data from core samples, chemical tracer tests, contaminant distribution data, and numerical flow and transport models. The hydraulic head data show patterns that are consistent with pumping on a dual-screened well, however, many of the observed changes are smaller than expected. In situ thermal perturbation flow sensors successfully measured horizontal flow, but vertical flow could not be determined with sufficient accuracy to be useful in mapping flow patterns. Two types of chemical tracer tests were utilized at the site and showed that much of the flow occurs within a few meters of the GCW. Flow patterns were also assessed based on changes in contaminant (trichloroethylene, TCE) concentrations over time. The TCE data clearly showed treated water moving away from the GCW at shallow and intermediate depths, but the circulation of that water back to the well, except very close to the well, was less clear. Detailed vertical and horizontal hydraulic conductivities were measured on 0.3 m-long sections from a continuous core from the GCW installation borehole. The measured vertical and horizontal hydraulic conductivity data were used to construct numerical flow and transport models, the results of which were compared to the head, velocity and concentration data. Taken together, the field data and modeling present a fairly consistent picture of flow and transport around the GCW. However, the time and expense associated with conducting all of those tests would be prohibitive for most sites. As a consequence, a sequential protocol for GCW characterization is presented here in which the number of tools used can be adjusted to meet the needs of individual sites. While not perfect, we believe that this approach represents the most efficient means for evaluating GCW performance.     

Mass conservation above slopes in the Regional Atmospheric Modelling System (RAMS)

This paper examines the mass balance in calculations with the Regional Atmospheric Modelling System (RAMS). An error is pointed out that concerns the calculation of the surface fluxes on slopes. This error affects all the prognostic variables in RAMS when sloping terrain is involved. Here we explain how the error can be corrected. To study the impact of the error, we compared simulations with the uncorrected and corrected model. The model contains CO₂ transport, and online mass balance calculations were performed for this tracer. Without correction, effective surface CO₂-fluxes on mountain slopes were found to be enhanced under certain common conditions to several times the parameterized fluxes. Neglecting this error may cause substantial deviations in both forward and inverse model calculations. After the correction a very good closure of the mass balance is obtained. The correction also modifies the meteorological parameters, although the consequences were limited compared to the CO₂-fluxes.     

Bacteriophage transport through a fining-upwards sedimentary sequence: laboratory experiments and simulation

A column containing four concentric layers of progressively finer-grained glass beads (graded column) was used to study the transport of the bacteriophage T7 in water flowing parallel to layering through a fining-upwards (FU) sedimentary structure. By passing a pulse of T7, and a conservative solute tracer upwards through a column packed with a single bead size (uniform column), the capacity of each bead type to attenuate the bacteriophage was determined. Solute and bacteriophage responses were modelled using an analytical solution to the advection-dispersion equation, with first-order kinetic deposition simulating bacteriophage attenuation. Resulting deposition constants for different flow velocities indicated that filtration theory-determined values differed from experimentally determined values by less than 10%. In contrast, the responses of solute and bacteriophage tracers passing upwards through graded columns could not be reproduced with a single analytical solution. However, a flux-weighted summation of four one-dimensional advective-dispersive analytical terms approximated solute breakthrough curves. The prolonged tailing observed in the resulting curve resembled that typically generated from field-based tracer test data, reflecting the potential importance of textural heterogeneity in the transport of dissolved substances in groundwater. Moreover, bacteriophage deposition terms, determined from filtration theory, reproduced the T7 breakthrough curve once desorption and inactivation on grain surfaces were incorporated. To evaluate the effect of FU sequences on mass transport processes in more detail, bacteriophage passage through sequences resembling those sampled from a FU bed in a fluvioglacial gravel pit were carried out using an analogous approach to that employed in the laboratory. Both solute and bacteriophage breakthrough responses resembled those generated from field-based test data and in the graded column experiments. Comparisons with the results of simulations using averaged hydraulic conductivities show that simulations employing averaged parameters overestimate bacteriophage travel times and underestimate masses recovered and peak concentrations.     

The effect of entrapped nonaqueous phase liquids on tracer transport in heterogeneous porous media: laboratory experiments at the intermediate scale

This work considers the applicability of conservative tracers for detecting high-saturation nonaqueous-phase liquid (NAPL) entrapment in heterogeneous systems. For this purpose, a series of experiments and simulations was performed using a two-dimensional heterogeneous system (10x1.2 m), which represents an intermediate scale between laboratory and field scales. Tracer tests performed prior to injecting the NAPL provide the baseline response of the heterogeneous porous medium. Two NAPL spill experiments were performed and the entrapped-NAPL saturation distribution measured in detail using a gamma-ray attenuation system. Tracer tests following each of the NAPL spills produced breakthrough curves (BTCs) reflecting the impact of entrapped NAPL on conservative transport. To evaluate significance, the impact of NAPL entrapment on the conservative-tracer breakthrough curves was compared to simulated breakthrough curve variability for different realizations of the heterogeneous distribution. Analysis of the results reveals that the NAPL entrapment has a significant impact on the temporal moments of conservative-tracer breakthrough curves.     

土壤水稻系统中210Pb和210Bi的行为及载体Pb的影响

采用~(210)Pb示踪方法,研究了~(210)Pb和~(210)Bi在土壤和水稻中存在的形态.土壤中~(210)Pb主要以可给态存在,占总量的79％—91％.~(210)Bi主要以结合态存在,占总量的80％—98％,随时间增长,可给态~(210)Pb逐渐向结合态转变;结合态~(210)Bi向着可给态方向变化.进入水稻的~(210)Pb和~(210)Bi大部分是自由移动的离子形式,~(210)Pb的结合态<1％;~(210)Bi占40％.~(210)Pb和~(210)Bi性质上的差异表现了土壤对二者吸附力强弱的不同.还讨论了载体Pb对~(210)Pb和~(210)Bi吸附行为的影响.