Use of tree rings to investigate the onset of contamination of a shallow aquifer by chlorinated hydrocarbons

Oaks (Quercus velutina Lam.) growing over a shallow aquifer contaminated by chlorinated hydrocarbons were studied to determine if it was possible to estimate the approximate year that contamination began. The annual rings of some trees downgradient from the contaminant release site contained elevated concentrations of chloride possibly derived from dechlorination of contaminants. Additionally, a radial-growth decline began in these trees at approximately the same time that chloride became elevated. Growth did not decline in trees that contained smaller concentrations of chloride. The source of elevated chloride and the corresponding reductions in tree growth could not be explained by factors other than contamination. On the basis of tree-ring evidence alone, the release occurred in the late 1960s or early 1970s. Contaminant release at a second location apparently occurred in the mid- to late 1970s, suggesting that the area was used for disposal for at least 5 years and possibly longer.     

Seasonal variations of monoterpene emissions from coniferous trees of different ages in Korea

Seasonal variations of emission rates and compositions from coniferous species were measured under controlled conditions using a vegetation enclosure method. Total emission rates and compositions of monoterpene compounds from young and adult trees in different seasons were compared.

It was found that the total emission rates and the components of monoterpene varied significantly with tree species, age, and season. Total emissions from C. japonica and P. koraiensis were higher for older trees than for younger trees; however, significantly higher emissions were found from younger trees for C. obtusa. Higher monoterpene emission rates from each plant were found in spring and summer compared with autumn and winter emissions.     

Review of hydrogen safety during storage,transmission, and applications processes

Hydrogen is considered an excellent clean fuel with potential applications in several fields. There are serious safety concerns associated with the hydrogen process. These concerns need to be thoroughly understood and addressed to ensure its safe operation. To better understand the safety challenges of hydrogen use, application, and process, it is essential to undertake a detailed risk analysis. This can be achieved by performing detailed consequence modellings and assessing risk using the computational fluid dynamics (CFD) approach. This study comprehensively reviews and analyses safety challenges related to hydrogen, focusing on hydrogen storage, transmission, and application processes. Range of release and dispersion scenarios are investigated to analyse associated hazards. Approaches to quantitative risk assessment are also briefly discussed.     

Green energy generation through PEHF – a blueprint of alternate energy harvesting

In this work, an attempt has been made to harvest green energy from piezoelectric material using fluid flow in a conduit. Piezoelectric Energy Harvesting using Fluid Flow (PEHF) experimental model has been designed and the outputs obtained are compared with results obtained from simulations using ANSYS (computational fluid dynamics) and also with the mathematical modeling. The PEHF model has been utilized to analyze the effect of flow rate of water with reference to energy extracted. The full wave bridge rectifier and voltage doubler circuits have been used to obtain the direct current (DC) from the PEHF model. It is observed that the output obtained using experiments holds good in agreement with the results retrieved through simulations and mathematical results. The increase in flow rate of fluid leads to initially increase and then decrease in output of PEHF model as the maximum energy generated when flow rates (external force) matches with the frequency of excitation of the systems, i.e., at its resonance. The maximum energy output is generated at its resonance frequencies. It is observed that the full wave bridge rectifier circuit gives greater output as compared to a voltage doubler circuit.     

Comparison of using polyurethane foam passive samplers and tree bark samples from Western China to determine atmospheric organochlorine pesticide

Polyurethane foam(PUF)passive samplers were deployed and tree bark samples were collected at 15 sites across western China in 2013,and the organochlorine pesticide(OCP)concentrations in the samples were determined.Dichlorodiphenyltrichloroethane and its degradation products(collectively called DDTs),hexachlorocyclohexanes(HCHs),and hexachlorobenzene(HCB)were the dominant OCPs in the PUF samples and tree bark samples.The mean DDTs,HCHs and HCB concentrations were 33,22 and 18 ng/sample in the PUF samples,and 428,74,and 43 ng/(g lipid weight(lw))in the tree bark,respectively.The OCP concentrations in the air,calculated using PUF–air and tree-bark–air partitioning models,were of the same order of magnitude.Both sample types showed that relatively fresh inputs of DDT and HCHs to the environment have occurred in western China.Meanwhile,PUF passive samplers were compared with the use of tree bark samples as passive samplers.The OCP compositions in the PUF and tree bark samples were different.Only the relatively stable OCPs(such as HCB,β-HCH and p,p′-dichlorodiphenyldichloro-ethylene(DDE))were consistent in the PUF and tree bark samples.     

我国大气环境影响评价的进展

随着我国大气环境保护的重点从点源烟尘治理向区域环境污染综合防治发展,近20多年来,大气环境影响评价在评价范围、内容要求、工作程序、实验方法、输送扩散模型以及与总量控制、区域规划、风险评价等的关系方面都有长足的进步.在已完成的2000多项大气环境影响评价成果的基础上,本文作了全面的回顾,总结了各阶段的特点及开展的主要工作,提出了6项今后应着重解决的问题和近期内可能取得的进展.     

Testing the importance of accurate meteorological input fields and parameterizations in atmospheric transport modelling using dream - validation against ETEX-1

A tracer model, the DREAM, which is based on a combination of a near-range Lagrangian model and a long-range Eulerian model, has been developed. The meteorological meso-scale model, MM5V1, is implemented as a meteorological driver for the tracer model. The model system is used for studying transport and dispersion of air pollutants caused by a single but strong source as, e.g. an accidental release from a nuclear power plant. The model system including the coupling of the Lagrangian model with the Eulerian model are described. Various simple and comprehensive parameterizations of the mixing height, the vertical dispersion, and different meterological input data have been implemented in the combined tracer model, and the model results have been validated against measurements from the ETEX-1 release. Several different statistical parameters have been used to estimate the differences between the parameterizations and meterological input data in order to find the best performing solution.     

Integrated coastal management: the challenge of transdisciplinarity

The Euroconference on Coastal Management Research held in San-Feliu de Guixols, Spain, in December 1997 brought together scientists from a great variety of disciplines in the natural and social sciences, in a search for modes of transdisciplinary cooperation in the context of integrated coastal management. During the conference the participants discussed which interactions among disciplines are required for different coastal issues. Discussion groups each focused on a particular type of coastal environment, characterized by a particular type and degree of development. The group discussions were inspired by background papers which were prepared for this purpose by invited speakers. A selection of these background papers were redrafted on the basis of the conference outcome, and are published in this issue of theJournal of Coastal Conservation. The reports of the discussion groups are published in a conference proceedings booklet issued by EMAPS (1998), the European Polar and Marine Sciences Secretariat. A synthesis of ideas on the challenge of transdisciplinarity, expressed during the discussion group sessions, is presented in this introduction. The statements reflect opinions or suggestions which received broad support from the participants; they should not be taken as proven knowledge.     

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.     

Evaluating the ability of habitat suitability models to predict species presences

Models predicting species spatial distribution are increasingly applied to wildlife management issues, emphasising the need for reliable methods to evaluate the accuracy of their predictions. As many available datasets (e.g. museums, herbariums, atlas) do not provide reliable information about species absences, several presence-only based analyses have been developed. However, methods to evaluate the accuracy of their predictions are few and have never been validated. The aim of this paper is to compare existing and new presence-only evaluators to usual presence/absence measures.