水中一氯胺和二氯胺的紫外连续流动测定

本文研究了二氯胺与溴化钾的反应及其产物。采用微孔渗透膜分离－紫外分光测定系统,测定水溶液中的一氯胺与二氯胺。本法的线性范围为２×１０＾－５ｍｏｌ·ｌ＾－１－１×＾－２ｍｏｌ·ｌ＾－１,标准偏差在２×１０＾－４ｍｏｌ·ｌ＾－１时为４．３％。     

天水市紫外吸收性气溶胶时空动态的遥感监测

采用OMI传感器的气溶胶产品,分析了2006—2015年中国西部城市天水市对流层紫外吸收性气溶胶的时空分布特征。结果表明:空间上,十年间天水市的吸收性气溶胶表现出从中部向周围依次减弱的南北向带状分布规律;季节变化呈现出秋冬季高于春夏季的规律;时间上,吸收性气溶胶指数(AI)从2006年的0.075增至2015年的0.506,年均值为0.28,年均增长率为57.5%;十年间出现2次阶段性增长和2次阶段性减小;AI年际变化与天水市地方总产值相关性为0.902,第一产业对其影响最大,第三产业影响最小。     

紫外光度法测定地表水中石油类的油标选择

精选了一种新油标。采用这种油标,可使紫外分光光度法测地表水中石油类的令人满意,省工省时。     

紫外分光光度法在水中阴离子表面活性剂标准样品研制中的应用

研究了阴离子表面活性剂水溶液的紫外吸收特性,并将研究结果用于阴离子表面活性剂水质标样的稳定性,均匀性和定值工作,简化了操作手续,获得了准确的分析结果。     

Enhancement of UV and chromate mutagenesis by nickel ions in the Chinese hamster HGPRT Assay †

1. The HGPRT (Hypoxanthine‐Guanine‐Phospho‐Ribosyl‐Transferase) assay with Chinese Hamster V79 cells was used to measure the mutagenic effects of UV irradiation, potassium dichromate and nickel chloride. The agents were tested separately and in the combinations of UV plus nickel and dichromate plus nickel.

2. UV, Cr(VI) and Ni(II) were confirmed to be mutagenic in the V79 cell assay. The combination of UV(5J/m²) and Ni(II) (0.5 mM) caused a mutation rate 11.2 times above that corresponding to the sum of the individual mutation rates of these agents. The combined action of Cr(VI) (0.1 mM) and Ni(II) (0.5 mM) produced a mutation rate 2.8 fold above that corresponding to the sum of the individual rates of the separate agents.

3. The enhancing effect of nickel chloride on the mutagenicity of UV or Cr(VI) is interpreted by an interference of Ni(II) with the repair of DNA lesions.     

Phototransformation of herbicide metsulfuron methyl

Phototransformation of the herbicide metsulfuron methyl was investigated on glass surface under sunlight and ultraviolet (UV) light and compared with dark condition. The half-lives of metsulfuron methyl under UV light and sunlight were found to be 0.5 and 7.8 days respectively. Rate of phototransformation followed first order kinetics with significant correlation coefficient. The major photoproducts were identified as methyl-2-sulfonyl-amino-benzoate, 2-amino-6-methoxy-4-methyltriazine and saccharin (O-sulfobenzoimide). Various metabolites from this study were identified by high performance liquid chromatography (HPLC). Authentic samples required for HPLC comparison were prepared in laboratory and characterized on the basis of nuclear magnetic resonance (NMR) and infra red (IR) spectral data. These metabolites were also identified from metsulfuron methyl treated wheat field soil.     

Photodegradation of sulfonamide antibiotics in simulated and natural sunlight: Implications for their environmental fate

The photochemical fate of seven sulfonamides was investigated in matrices representative of natural water bodies under various light sources. Fundamental photolysis parameters such as molar absorption coefficient, quantum yield (QY) and first-order rate constants were determined. The photolysis decay rate was dependent on the protonation state of the molecule, pH of the water sample and dissolved organic matter. Natural organic matter was the most significant factor in the indirect photolysis of sulfonamides. Half-lives were in the range of minutes at 254 nm to days under natural sunlight. Under natural sunlight, all sulfonamides showed higher removal rates in natural waters implying that indirect photolysis is the predominant mechanism.     

贵州喀斯特地区旅游资源的变异与可持续利用

喀斯特景观与民族文化是不可再生的旅游资源,其开发在促进喀斯特地区经济、文化发展的同时,也加剧了环境的损耗和地方特色的消失,旅游资源变异现象普遍发生。文中分析了资源变异的几种情况,并指出控制资源变异,实现可持续利用的途径     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.