Predicting the ejection velocities of fragments from explosions cylindrical pressure vessels: Uncertainty and sensitivity analysis

The purpose of this study was a refinement of knowledge on predicting the ejection velocities of fragments generated by explosions of cylindrical horizontal pressure vessels. A procedure is proposed for assessing these velocities by means of the stochastic simulation. The procedure is used to quantify uncertainties related to the ejection velocities and to carry out a simulation-based sensitivity analysis. The main finding is that the currently available information on phenomena related to the vessel fragmentation is sparse and, therefore, predicting ejection velocities will require a substantial amount of subjective judgement. It was found that ejection velocities are functions of a relatively large number of random input variables, many of which must be modelled subjectively. The study revealed also the need to choose subjectively between several alternative mathematical models used to specify input variables that influence the ejection velocities. The most critical choice must be made between several models used for an assessment of the energy liberated during vessel explosions. Results of the sensitivity analysis indicate that the ejection velocities are influenced mainly by input variables used to express energies involved in the prediction problem. Increased sensitivity to filling ratio of a two-phase pressure vessel was also detected. Results of the study can be used for an improvement of estimation of fragment impact probabilities and design of protective barriers that are built close to the pressure vessels posing explosion hazard.     

膜—生物反应器特性影响因素研究

通过对外压管式膜组件与曝气池构成的好氧膜生物反应器的研究，分别考究膜组件的操作压力，膜面流速以及活性污泥混合液的污泥浓度，溶解性有机特的含量和温度等对膜通量的影响。     

Umbilical and uterine flow velocity waveforms in pregnancies complicated by major fetal anomalies

A continuous wave Doppler unit was used to obtain umbilical and uterine artery flow velocity waveforms in pregnancies complicated by a major fetal abnormality. A total of 139 examinations were performed on 32 women between 26 to 41 weeks' gestation, and the records were reviewed to determine the changes associated with fetal malformation. The systolic/diastolic (A/B) ratio was used as an index of blood flow resistance in the umbilical artery and the systolic minus diastolic divided by systolic (A–B)/A for the branches of the uterine artery. Seventeen out of 32 patients showed high systolic/diastolic ratio in waveforms taken from the umbilical artery. In 30 out of 32 patients the uterine artery waveform was normal (in two patients the results were equivocal). It appears that a fetal mechanism may determine the changes in the umbilical placental circulation resulting in an umbilical artery pattern of high flow resistance in more than half of the patients with congenital anomalies.     

Relative velocities of DNAPL and aqueous phase plume migration

Numerical simulation is used to examine the relative velocities of DNAPL and aqueous phase plumes in sandy aquifers where lateral spreading of DNAPL has occurred at the base of the aquifer. The scenario being modeled is one where a permeable aquifer is underlain by a sloping aquitard, which results in lateral migration of the DNAPL down the slope, in addition to lateral migration of an aqueous phase plume subject to a specified hydraulic gradient. A sensitivity analysis is presented to the impacts of both DNAPL properties and geologic properties. The most important chemical properties governing the relative velocities of the DNAPL and the shallow aqueous phase plume are the DNAPL viscosity and the aqueous component soil-water partition coefficient (Kd). The dip of the underlying aquitard was found to be relatively unimportant, at least for the range of values studied. The scenario under consideration can be important in conceptual model development and remedial design, as in certain cases DNAPL could be migrating in areas without the evidence of a well-developed aqueous phase plume. The implication of this work is that the absence of a shallow aqueous phase plume directly downgradient of a DNAPL source zone does not rule out the possibility of deep occurrences of DNAPL beyond the shallow monitoring well network. A further finding of this study is that the occurrence of a highly sorbing compound in groundwater at virtually any concentration may indicate the immediate upgradient presence of residual or pooled DNAPL.     

液幕式湿法脱硫中喷嘴型线对竖直射流特性的影响研究

液幕湿法脱硫就是利用竖直向上喷射的石灰石浆液冲洗烟气,吸收效果好坏主要取决于喷嘴的竖直射流情况,试验研究了7种用于该塔中的喷嘴竖直射流特性。发现各喷嘴竖直射流都存在临界雾化速度。整理出无量纲平均半径与射流速度之间的关系,分析发现喷口直径和喷嘴高度对回落液体覆盖面积影响不大。试验结果表明所有喷嘴的回落液幕分布均匀性相同。导出了射流高度与喷射压力关系式,发现试验范围内喷嘴阻力损失情况相当。     

River Habitat Quality from River Velocities Measured Using Acoustic Doppler Current Profiler

Prior research has demonstrated the utility of metrics based on spatial velocity gradients to characterize and describe stream habitat, with higher gradients generally indicative of higher levels of physical heterogeneity and thus habitat quality. However, detailed velocity data needed to compute these metrics are difficult to obtain. Acoustic Doppler current profilers (ADCP) may be used to rapidly collect detailed representations of river velocity fields. Herein we demonstrate use of ADCP to obtain ecologically relevant data and compute associated metrics. Data were collected from four reaches of the Little Tallahatchie River in northern Mississippi. Sampled reaches were selected to observe velocity regimes associated with three distinctly different conditions: downstream from a major flow obstruction (a low weir), downstream from the apices of each of two bends, and within an extremely long, straight reach created by channelization. Three-dimensional velocity data sets from each site were used to compute metrics of habitat quality proposed by others. A habitat metric based on the presence of rotational flow in the vertical plane proved to be the best discriminator among conditions within the sampled reaches. Two of four habitat quality metrics computed from these measured velocities were greatest for the sharpest meander bend. ADCP hold great potential for study of riverine physical aquatic habitats, particularly at the reach scale. Additional work is needed to develop generally applicable field protocols and data reduction tools. Specifically, guidelines for ADCP settings and configuration appropriate for a range of riverine site conditions must be developed. Advances in instrumentation are needed to allow collection of information in closer proximity to the free surface and solid boundaries.     

某污水处理厂活性污泥沉降脱水性能的研究

以污泥沉降特性的参数及各参数之间的规律为研究目标,结果表明当活性污泥的SVI和MLSS分别在110-150,1500-2000mg/L时,污泥沉降速度在2-6min内有很明显的峰值,污泥界面高度变化明显.且在维持污泥沉降性能的前提下,随着污泥SVI(污泥指数)的增大,污泥的MLSS(污泥浓度)值呈递减趋势.具有相同污泥...     

A two-region nonequilibrium model for solute transport in solution conduits in karstic aquifers

A two-region nonequilibrium model was used to calibrate initial solute-transport parameter estimates generated from tracer-breakthrough curves (TBCs) developed from tracer tests conducted in uni-axial solution conduits in karstic aquifers. Two-region nonequilibrium models account for partitioning of solute into mobile- and immobile-fluid regions to produce a more representative model fit to the strong tails associated with TBCs than do equilibrium models. The nonequilibrium model resulted in an increase in average flow velocities and a decrease in longitudinal dispersion coefficients over comparable estimates using an equilibrium model. Increases in velocity and decreases in dispersion were obtained at the expense of including parameters that describe solute partitioning and mass transfer rate for the mobile- and immobile-fluid regions. In addition, nonidentifiable sorption and mass transfer parameters for the immobile-fluid regions could only be described in terms of upper and lower bounds using readily determined identifiable ratios representing solute partitioning and system constraints based on known physical properties. The identifiable ratios and system constraints serve to minimize model nonuniqueness and renders the nonidentification problem trivial.     

Effects of Vehicle Impact Velocity and Front-End Structure on Dynamic Responses of Child Pedestrians

To investigate the effects of vehicle impact velocity and front-end structure on the dynamic responses of child pedestrians, an extensive parametric study was carried out using two child mathematical models at 6 and 15 years old. The effect of the vehicle impact velocity was studied at 30, 40, and 50 km/h in terms of the head linear velocity, impact angle, and head angular velocity as well as various injury parameters concerning the head, chest, pelvis, and lower extremities. The variation of vehicle front-end shape was determined according to the shape corridors of modern vehicles, while the stiffness characteristics of the bumper, hood edge, and hood were varied within stiffness corridors obtained from dynamic component tests. The simulation results show that the vehicle impact speed is of great importance on the kinematics and resulting injury severity of child pedestrians. A significant reduction in all injury parameters can be achieved as the vehicle impact speed decreases to 30 km/h. The head and lower extremities of children are at higher injury risks than other body regions. Older children are exposed to higher injury risks to the head and lower leg, whereas younger ones sustain more severe impact loads to the pelvis and upper leg. The results from factorial analysis indicate that the hood-edge height has a significant effect on the kinematics and head impact responses of children. A higher hood edge could reduce the severity of head impact for younger children, but aggravate the risks of head injury for older ones. A significant interaction exists between the bumper height and the hood-edge height on the head impact responses of younger child. Nevertheless, improving the energy absorption performance of the hood seems effective for mitigating the severity of head injuries for children.     

Rockburst hazard determination by using computed tomography technology in deep workface

The rockburst in mines results from the dynamic load coupled with static one in coal seams around workface zones, so it is essential to learn the stress distribution of the coal and surrounding rock for determination of rockburst risk areas. The relationship between the elastic wave velocity and stress applied on coal sample was investigated systematically by laboratory testing, theoretically analysis, as well as on-site observation, and a positive correlation between them under uniaxial compression was put forward. Furthermore, it is drawn that the anomaly of elastic wave velocity reflects the stress changes: the positive anomaly ascertains the stress concentration while the negative anomaly estimates the mining destress and weaken degree, and corresponding assessment criterions and parameters were established respectively. The hazard areas and degree of an island longwall face 16302C were forecasted before coal winning based on the elastic wave anomaly distribution rules using active tremor velocity inversion, monitoring results of mining shocks during exploitation indicate that the consistency between locations of big tremors and where forecasted by computed tomography (CT) exceed 80%. The successful application of this technology achieved remarkable economic and social benefits for disaster control in rockburst mines.