不同给水管材对管壁附着生物膜铅、镉的解吸动力学研究

给水管壁生物膜会吸附水中的重金属元素积累在管壁生物膜中,在受到扰动时释放回到水体,危害饮用水水质安全。试验以上海管网末梢水为实验对象,研究了PVC、铸铁和紫铜等三种管材上生物膜对铅、镉的解吸特性。结果表明,PVC、铸铁和紫铜附着生物膜对铅的解吸容量qe分别为:5.92211μmol·m^-2、128.3051μmol·m^-2和21.1808,解吸速率常数k分别为:0.001060 m^2·μmol^-1·min^-1、0.000041 m^2·μmol^-1·min^-1和0.000503 m^2·μmol^-1·min^-1,对于镉元素三种材质的解吸容量qe分别为:14.71519μmol·m^-2、18.50481μmol·m^-2和2.25225μmol·m^-2;解吸速率常数k分别为:0.000102 m^2·μmol^-1·min^-1、0.001070 m^2·μmol^-1·min^-1和0.000103 m^2·μmol^-1·min^-1。     

关于城市河流水污染防治技术应用和研究

随着我国经济的不断发展,各种工厂也大量的成立,而这也使得很多废弃物及废水被过度排放到湖泊与河流之中,进而导致其出现了严重的污染问题。污染不仅对人们的生活质量产生了影响,同时也对生态的平衡发展产生了很大的阻碍,业已经成为社会各界高度关注和重视的问题。基于此,本文围绕城市河流水污染的现状进行了分析,对于污染产生的原因也进行了阐述,针对城市河流水污染防治技术的应用也进行了探讨和研究,以期可以有效解决我国出现的河流水污染问题,进而为人们及社会营造一个全新、绿色的河流环境。     

水环境监测信息化新技术的应用分析

随着国民经济的快速发展,我国人民的生活水平和质量也随之而提高,对于生态环境以及居住环境的要求也相应提升。水是万物之源,是保障人们生产生活的基本要素之一,为了有效提升水环境质量,先进的水环境监测技术必不可少。随着科学技术的飞速发展,水环境监测技术也在不断调整和优化,逐渐向信息化方向发展,在生态环境保护工作中发挥着不可替代的作用。本文将详细阐述现阶段我国在水环境监测工作中实施的信息化新技术,希望能为相关研究人员提供参考和借鉴。     

Locally enhanced electric field treatment (LEEFT) for water disinfection

• Nanowire-assisted LEEFT is applied for water disinfection with low voltages. • LEEFT inactivates bacteria by disrupting cell membrane through electroporation. • Multiple electrodes and device configurations have been developed for LEEFT. • The LEEFT is low-cost, highly efficient, and produces no DBPs. • The LEEFT can potentially be applicable for water disinfection at all scales. Water disinfection is a critical step in water and wastewater treatment. The most widely used chlorination suffers from the formation of carcinogenic disinfection by-products (DBPs) while alternative methods (e.g., UV, O₃, and membrane filtration) are limited by microbial regrowth, no residual disinfectant, and high operation cost. Here, a nanowire-enabled disinfection method, locally enhanced electric field treatment (LEEFT), is introduced with advantages of no chemical addition, no DBP formation, low energy consumption, and efficient microbial inactivation. Attributed to the lightning rod effect, the electric field near the tip area of the nanowires on the electrode is significantly enhanced to inactivate microbes, even though a small external voltage (usually<5 V) is applied. In this review, after emphasizing the significance of water disinfection, the theory of the LEEFT is explained. Subsequently, the recent development of the LEEFT technology on electrode materials and device configurations are summarized. The disinfection performance is analyzed, with respect to the operating parameters, universality against different microorganisms, electrode durability, and energy consumption. The studies on the inactivation mechanisms during the LEEFT are also reviewed. Lastly, the challenges and future research of LEEFT disinfection are discussed.     

快速城市化背景下的思雅河流域水环境分析

通过对思雅河流域连续3年的水环境质量监测,结合遥感影像获得其土地利用类型变化,据此研究城市化对水环境的影响。结果表明:2012—2014年间思雅河流域自然、农业景观面积占比减少,而建设用地面积持续增加;研究期间除TDS年均值略微下降外,其余水质指标的年均值几乎均呈递增趋势,尤以TSS和COD增加最显著;TSS、COD、NH 3-N和TP的相对标准偏差均>0.1,显著高于其余参数,说明其波动程度较大。主成分分析表明水环境变化最主要的影响因子为第一主成分(TSS、COD、NH 3-N和TP)。贵安新区大学城建设活动加重了思雅河流域水体污染趋势。     

响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

便携式GC-MS仪快速测定水中硝基苯及其在应急监测中的应用

采用便携式GC-MS仪快速测定水中硝基苯,通过优化水中离子强度和顶空加热时间,使方法在0μg/L^300μg/L范围内线性良好,方法检出限为2.5μg/L。标准溶液6次测定结果的RSD为7.8%~10.9%,实际水样的加标回收率为80.7%~103%。同步测定试验表明,硝基苯与7种苯系物分离良好。与国标方法对比,该方法单个样品测定时间由2 h缩短为15 min。将该方法用于应急监测工作中,及时有效的数据可为污水处理及事故调查提供分析和研判依据。     

Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

土壤渗滤处理系统运行控制的模拟研究

通过建立地下水数学模型,回答了土壤渗滤工程运行控制中的两个难点问题:(1)工程运行水力负荷.当工程地块周边存在河流时,河流水位低时,有助于增加水力负荷,反之则降低水力负荷;实际土壤运行面积的增加和独立运行单元之间的间距增加也能够增加工程运行水力负荷.(2)地下水水质监测井的优化布设.模拟工程运行后地下水水质空间分布特征,在地下水水质最不利的位置和其他特别关注的位置布置监测井,从而能够以具有典型代表性且数目较少的监测井达到准确评估工程对地下水水质影响的目的.     

原料含水率及成型直径对秸秆成型燃料耐久性的影响

原料含水率及成型直径对秸秆成型燃料耐久性具有重要影响,通过试验发现含水率对秸秆固化成型(SDBF)技术的抗渗水性影响很显著,原料含水率10%～15%(质量分数,下同)范围内得到的SDBF渗水分解超过4 h;原料含水率也显著影响SDBF的抗跌碎性,含水率不大于15%的SDBF失重率一般不超过5%,能满足规模化技术的应用.对于HPB-成型机生产的SDBF,成型直径大的SDBF抗渗水性时间较长,随着成型直径减小抗渗水性时间减少,抗渗水性能降低.